Jump to content
Brian Enos's Forums... Maku mozo!

KWA KZ75


Bollis

Recommended Posts

I have one and it is very close to my CZ75 SA it is not as heavy as my SP01 which is the same as your Shadow.I use this to practice Steel Challenge,but after 8000 rnds I developed problems with shooting full auto and bursts,also will not feed properly.I will be sending it back to KWA 2 moro,recieved a RMA # from them for return and repair.Unfortunatly the warranty is only 45 days after purchase and I have had mine only 90 days.Was told by them that they are not designed to run on propane gas which I use,should use only green gas,problem is it would cost a fortune for me to do that with the amount of practice I do,and its hard to get here.I am looking at other guns like the Tokyo Mauri 5.1 High Capa since it can be upgraded with after market parts,and I think it will stand up to the pressures of propane.

This is too bad since my Steel Challenge gun is a Custom built Open CZ75 SA and this KZ75 airsoft feels the same,I even installed a 90 degree mount on it and one of my C-more sights.

It is a good gun but if your going to put a lot of rnds thru it you might want to look at other options.

Link to comment
Share on other sites

I got mine today, it feels realy good and fits my holster. I havn´t shoot it yet because I dont have the gas yet, will go buy it tomorow.

It is a nice gun,and the CZ 75 grips will fit I used my long thin Aluminum ones.Mine is at the factory awaiting repair.I did buy a new WE / CQB Master it is really a well made airsoft gun and runs awesome with propane it can be upgraded with every part you can think of.

http://www.airsoftpost.com/product_info.php?cPath=21_45_252&products_id=27384

Enjoy,its a lot of fun to be able to get trigger time in at home when you want.

Link to comment
Share on other sites

  • 5 weeks later...

Here's pictures of my KZ-75 and my Tanfoglio Gold Team. My objective is to make it as close a look and feel to my Gold Team, for backdoor IPSC practice.

Work already done:

Delrin barrel extension - to fit my competiton holster

Thinned the trigger guard - to fit my competition holster

Trimmed rear sight - to fit under red dot

Primary Arms Aimpoint Clone + DAA Mount

Grip tape frontstrap and rearstrap + in lieu of checkering

Work to be done:

Trigger job (pretravel and overtravel set screws)

New Trigger? Maybe, If i can make one.

Steel magwell (add weight)

Thin grips (or new grips)

Touchup paint

Slide Racker

5791799217_d3c799a0a5.jpg

IMG_1145 by bures, on Flickr

5791799411_73f81ff91e.jpg

IMG_1150 by bures, on Flickr

5791799629_e97b03f8d7.jpg

IMG_1142 by bures, on Flickr

Edited by Jeff686
Link to comment
Share on other sites

Here's pictures of my KZ-75 and my Tanfoglio Gold Team. My objective is to make it as close a look and feel to my Gold Team, for backdoor IPSC practice.

Work already done:

Delrin barrel extension - to fit my competiton holster

Thinned the trigger guard - to fit my competition holster

Trimmed rear sight - to fit under red dot

Primary Arms Aimpoint Clone + DAA Mount

Grip tape frontstrap and rearstrap + in lieu of checkering

Work to be done:

Trigger job (pretravel and overtravel set screws)

New Trigger? Maybe, If i can make one.

Steel magwell (add weight)

Thin grips (or new grips)

Touchup paint

Slide Racker

5791799217_d3c799a0a5.jpg

IMG_1145 by bures, on Flickr

5791799411_73f81ff91e.jpg

IMG_1150 by bures, on Flickr

5791799629_e97b03f8d7.jpg

IMG_1142 by bures, on Flickr

Where where can I buy one ?

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
×
×
  • Create New...