jmoney Posted April 22, 2011 Share Posted April 22, 2011 I was just curious to see if you guys who are using a push through die like EGW or GRx are running your rounds through that first before tumbling? If so you do you run them through the regular dillon re-size die afterwards or just leave that spot blank? Also what would be a great single stage to de-prime/resize with that isn't very expensive, I don't need anything fancy if it is just for this purpose. Link to comment Share on other sites More sharing options...
jimzim Posted April 22, 2011 Share Posted April 22, 2011 I use an RCBS Rock Chucker with the Gizmo (similar to GRx) to resize after cleaning. It then goes to my 650 to deprime in a regular sized caliber die before powder, seat, and crimp. Link to comment Share on other sites More sharing options...
wide45 Posted April 22, 2011 Share Posted April 22, 2011 Clean before sizing. Keep the dirt out of your dies. Link to comment Share on other sites More sharing options...
jmoney Posted April 22, 2011 Author Share Posted April 22, 2011 Sounds good Link to comment Share on other sites More sharing options...
McGlock Posted April 23, 2011 Share Posted April 23, 2011 +1 to wide45. Also if you do the sizing first and depriming then clean you have more of a chance of getting tumbling media in the primer pocket... Not so good when trying to prime.. Link to comment Share on other sites More sharing options...
taptap Posted April 29, 2011 Share Posted April 29, 2011 Clean before sizing. Keep the dirt out of your dies. That’s how I always looked at it. Also your primer pockets get stuffed with media. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now