FishingFool Posted April 20, 2011 Share Posted April 20, 2011 It seems they put a new ballistic software up on their website and it doesn't have a function for the 1-6 z6i. Does anyone have a copy of it they can email to me? I wanna play around with the software and see what my various zero's are before I make a decision on the scope. Link to comment Share on other sites More sharing options...
Jesse Tischauser Posted April 20, 2011 Share Posted April 20, 2011 I could never get it to run On my computer. I need it again too??? Link to comment Share on other sites More sharing options...
Alaskapopo Posted April 20, 2011 Share Posted April 20, 2011 I could never get it to run On my computer. I need it again too??? I need it as well. Pat Link to comment Share on other sites More sharing options...
smokshwn Posted April 21, 2011 Share Posted April 21, 2011 My understanding is the BRT reticle is simply in mils. Why not just run your numbers through JBM or any other ballistics program and get your numbers? Link to comment Share on other sites More sharing options...
Alaskapopo Posted April 21, 2011 Share Posted April 21, 2011 My understanding is the BRT reticle is simply in mils. Why not just run your numbers through JBM or any other ballistics program and get your numbers? Math is my weakness can you explain what you mean. Pat Link to comment Share on other sites More sharing options...
Doug H. Posted April 21, 2011 Share Posted April 21, 2011 My understanding is the BRT reticle is simply in mils. Why not just run your numbers through JBM or any other ballistics program and get your numbers? Math is my weakness can you explain what you mean. Pat You go to http://www.jbmballistics.com and enter the data for your load. In the options click 1 mil for the drops and then look on the chart and see how many mils at each distance. I have mine zeroed at 175 yards so at 100 yards I'm .2 mil high, at 250 .6 low and at 300 1.0 mil low. Doug Link to comment Share on other sites More sharing options...
Alaskapopo Posted April 21, 2011 Share Posted April 21, 2011 My understanding is the BRT reticle is simply in mils. Why not just run your numbers through JBM or any other ballistics program and get your numbers? Math is my weakness can you explain what you mean. Pat You go to http://www.jbmballistics.com and enter the data for your load. In the options click 1 mil for the drops and then look on the chart and see how many mils at each distance. I have mine zeroed at 175 yards so at 100 yards I'm .2 mil high, at 250 .6 low and at 300 1.0 mil low. Doug Thanks Doug. Pat Link to comment Share on other sites More sharing options...
smokshwn Posted April 21, 2011 Share Posted April 21, 2011 Pat, Looks like you have it figured out. If you have any more q's let me know. Link to comment Share on other sites More sharing options...
Jesse Tischauser Posted April 21, 2011 Share Posted April 21, 2011 (edited) Now I forget how many mils each mark is on the reticle. Edited April 21, 2011 by jtischauser Link to comment Share on other sites More sharing options...
smokshwn Posted April 21, 2011 Share Posted April 21, 2011 (edited) The literature says that each bar and dot mark 1mil of subtention. So I count five mils of holdover points. Edited April 21, 2011 by smokshwn Link to comment Share on other sites More sharing options...
Alaskapopo Posted April 21, 2011 Share Posted April 21, 2011 Thanks smokshwn I have a chart printed from before the page went down but I changed my load and my new load is about 80fps slower. Just trying to get the difference figured out. With a 200 yard zero at 500 yards I have to hold the 5th mark under the target. Pat Link to comment Share on other sites More sharing options...
smokshwn Posted April 21, 2011 Share Posted April 21, 2011 I really like the trajectory cards the JBM can produce. They are simple clean and efficient. I laminate them and throw them in the bag. Link to comment Share on other sites More sharing options...
rcollier Posted April 21, 2011 Share Posted April 21, 2011 To all who requested the Swaro calculator I saved to my desktop (caz41, alaskapopo, c-rums, grywlfbg, etc.), when I attempted to send the whole file (10MB), even compressed to 5MB my email program after raising the file limits would not handle it. I did try. The stadia lines on the BRT reticle are 1 mil apart. Link to comment Share on other sites More sharing options...
Alaskapopo Posted April 21, 2011 Share Posted April 21, 2011 To all who requested the Swaro calculator I saved to my desktop (caz41, alaskapopo, c-rums, grywlfbg, etc.), when I attempted to send the whole file (10MB), even compressed to 5MB my email program after raising the file limits would not handle it. I did try. The stadia lines on the BRT reticle are 1 mil apart. I would be willing to send you some cash for you to burn it to a CD and snail mail it to me. Pat Link to comment Share on other sites More sharing options...
Alaskapopo Posted April 21, 2011 Share Posted April 21, 2011 http://ballisticprograms.swarovskioptik.com/prev/BRT_us.html'>http://ballisticprograms.swarovskioptik.com/prev/BRT_us.html Its up. Swarovski answered my email. Dear Patrick, the BRT will be included very soon. Until then you can run the old version on: http://ballisticprograms.swarovskioptik.com/prev/ Stay tuned for the update containing the BRT. Link to comment Share on other sites More sharing options...
Jesse Tischauser Posted April 21, 2011 Share Posted April 21, 2011 Has anybody built a load that puts some nice even (100, 50, or 25 yard) drops on each hold over mark? It sure would be easy to not have to remember tha hash number 4 is 468 yards. Or am I asking too much of the reticle? Link to comment Share on other sites More sharing options...
caz41 Posted April 21, 2011 Share Posted April 21, 2011 Thumbs up to Swaro to listening!!! Link to comment Share on other sites More sharing options...
smokshwn Posted April 21, 2011 Share Posted April 21, 2011 Jesse, You can either have a BDC reticle built for a specific bullet at a specific speed (think Burris XTR, Vortex Razor EBR, etc) or you can have a basic MOA or MIL scale hashes that denote a constant subtension regardless of the load. The Swaro is in mils so you get what you get in relation to holds. If you spend some time with JBM or any other ballistics program you could play with your velocity and/or bullet and get "better" numbers but it is never going to correspond to 300,400,500 etc. IMO the Swaro is exceptional glass and good illumination but at its pricepoint it falls short for me. It should be a FFP and I would prefer a BDC type reticle. Link to comment Share on other sites More sharing options...
Jesse Tischauser Posted April 21, 2011 Share Posted April 21, 2011 The Swaro is in mils so you get what you get in relation to holds. If you spend some time with JBM or any other ballistics program you could play with your velocity and/or bullet and get "better" numbers but it is never going to correspond to 300,400,500 etc. Thats what I'm looking for is a load with better numbers to match the mils. Link to comment Share on other sites More sharing options...
Bronco Posted April 21, 2011 Share Posted April 21, 2011 (edited) Your asking a reticle to do an awful lot. Granted it would be nice to have a reticle that will take all the thought out of aiming, but until you can control the wind and other atmospheric conditions your stuck having to adjust for them. The beauty of the standard mil or moa reticle is that the hash marks are equal, your not stuck with one bullet choice or velocity. Look at a typical long range rifle stage that you might see at any major match. You will have maybe 8 to 10 targets from contact to 400 yds. If your zeroed at 200 yd. then there is very little elevation change needed to hit a 8" plate out to 250 yd., hold center mass and it hits. At 300 yd. with my load (69 SMK @ 2750) it is .8 mil hold over, so just hold first mil. dot under cross hair in bottom 1/3 of plate and you have a hit, at 350 it is 1.3 mil hold over, just move first dot up to top of plate and another hit (at 300 yd. a 10" plate just fills the space between the mil marks). Move to 400 yd. and hold over is 1.8 mils, put 2nd. mil mark in bottom 1/3 of the plate and you get another hit. OK so we have shot all the targets out to 4ooyd. and we haven't even used 1/2 of the reticle yet. With minimal practice these holds become automatic. Plus you can pull the scope off the .223 and put it on a .308 and the reticle is still good to go. Edited April 21, 2011 by Bronco Link to comment Share on other sites More sharing options...
smokshwn Posted April 21, 2011 Share Posted April 21, 2011 The Swaro is in mils so you get what you get in relation to holds. If you spend some time with JBM or any other ballistics program you could play with your velocity and/or bullet and get "better" numbers but it is never going to correspond to 300,400,500 etc. Thats what I'm looking for is a load with better numbers to match the mils. JBM is your friend Link to comment Share on other sites More sharing options...
Jesse Tischauser Posted April 21, 2011 Share Posted April 21, 2011 I'm not asking the reticule to do anything. I'm wondering if anyone has really tuned their load to the ranges we shoot in conjunction with this reticle. I am using 55 hr FMJBT projectiles. I guess I could just stick different velocities in the program myself. Link to comment Share on other sites More sharing options...
smokshwn Posted April 21, 2011 Share Posted April 21, 2011 (edited) Jesse, You are not picking up what is getting laid down. This is not a BDC reticle....there is no tuning a load to match it. It is what it is 1mil subtensions. With any given load the mil hashes will only correspond to that ballistic point. You can play with velocity or your zero distance a little to make the holds match up but it will take some effort on your part. For example a 75 gr hornady at 2725 zeroed at 150yds will give you bars at 300, 400, 500, 575, 650 Edited April 21, 2011 by smokshwn Link to comment Share on other sites More sharing options...
Jesse Tischauser Posted April 21, 2011 Share Posted April 21, 2011 (edited) I understand everything in this thread. For example a 75 gr hornady at 2725 zeroed at 150yds will give you bars at 300, 400, 500, 575, 650 This is what I wanted!!!! Now if it only came in a 55 gr hornady bullet it would work for me:) The slow, fast drop 69 grain black hills ammo is accurate A's all get out but it drops like a rock. I want something faster, flatter and with a velocity that produced good round numbers to sync A's good A's possible with the mil reticle that is in this scope. I don't want to look at a card too see that the 3rd hash is 381 or whatever. I want something easy to remember:) Edited April 21, 2011 by jtischauser Link to comment Share on other sites More sharing options...
smokshwn Posted April 21, 2011 Share Posted April 21, 2011 I understand everything in this thread. For example a 75 gr hornady at 2725 zeroed at 150yds will give you bars at 300, 400, 500, 575, 650 This is what I wanted!!!! Now if it only came in a 55 gr hornady bullet it would work for me:) The slow, fast drop 69 grain black hills ammo is accurate A's all get out but it drops like a rock. I want something faster, flatter and with a velocity that produced good round numbers to sync A's good A's possible with the mil reticle that is in this scope. I don't want to look at a card too see that the 3rd hash is 381 or whatever. I want something easy to remember:) Oh....then I guess I didn't understand...you wanted someone to do the work for you! You can take your 55 (or 69 or 62 or 71.5 or 40 ...you get the idea) grain load and play with JBM until you find a zero and corresponding holdovers you can live with. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now