kuffs Posted December 27, 2011 Share Posted December 27, 2011 Welp, found the site I wanted. http://www.shop-cz.com/magazine-funnel-anodized-cz-75-ts-black/d-70738/ and http://www.shop-cz.com/grips-for-cz-75-ts-short-checkered-black/d-70774/ But it looks like it's gonna be a bit steep to get them over here to the states. I've bugged CZ-USA about CZUB parts before, they told me it could take months to source parts. Anyone got a source stateside? Still curious about what people think about the feel of the checkered grips as well. Link to comment Share on other sites More sharing options...
SUPERDUPER Posted January 4, 2012 Share Posted January 4, 2012 I was having a feed issue with my cmate open gun.The rounds where coming out of the big stick slightly nose down or almost level.This caused them to hit just below the feed ramp and lock the gun up.Adjusted mag lips and checked and rechecked spring and follower.Still had issue. Called cz custom and asked about bringing the ramp on down slightly below the front edge of the mag,they said should not hurt.Adjusted feed ramp and polished,can now feed any type nose bullet and start with 27 in the gun as was designed. Link to comment Share on other sites More sharing options...
JamesLovesJammie Posted January 4, 2012 Share Posted January 4, 2012 Welp, found the site I wanted. http://www.shop-cz.com/magazine-funnel-anodized-cz-75-ts-black/d-70738/ and http://www.shop-cz.com/grips-for-cz-75-ts-short-checkered-black/d-70774/ But it looks like it's gonna be a bit steep to get them over here to the states. I've bugged CZ-USA about CZUB parts before, they told me it could take months to source parts. Anyone got a source stateside? Still curious about what people think about the feel of the checkered grips as well. Here you go: http://czcustom.com/CZ-TS-Parts.aspx Link to comment Share on other sites More sharing options...
SUPERDUPER Posted January 17, 2012 Share Posted January 17, 2012 The Czechmate ran like a champ this weekend.The big stick is running.sure is nice to start with 27 in the gun. Still had a couple of mikes (operator error)but shot very well. Link to comment Share on other sites More sharing options...
Shawneeboy87 Posted January 17, 2012 Share Posted January 17, 2012 Got any video that we can check out? The Czechmate ran like a champ this weekend.The big stick is running.sure is nice to start with 27 in the gun. Still had a couple of mikes (operator error)but shot very well. Link to comment Share on other sites More sharing options...
PhotoJoe Posted January 19, 2012 Share Posted January 19, 2012 You can watch my YouTube-channel: youtube.com/photojoesweden Enjoy! Link to comment Share on other sites More sharing options...
SUPERDUPER Posted January 19, 2012 Share Posted January 19, 2012 Great video and nice to see the gun run so will at that temp.I think most shooters in south carolina will stay home if the temp is 18 or 19 degrees. good shootin.... Link to comment Share on other sites More sharing options...
SUPERDUPER Posted January 20, 2012 Share Posted January 20, 2012 Got the followers from grams yesterday.can now get 28 in the big stick. ( it is very tight not sure on function ) For sure can now load 27 in mag and 1 in pipe. Also 22 rds in the 140's. Gets better everyday. Link to comment Share on other sites More sharing options...
PhotoJoe Posted January 20, 2012 Share Posted January 20, 2012 Great video and nice to see the gun run so will at that temp.I think most shooters in south carolina will stay home if the temp is 18 or 19 degrees. good shootin.... Thanks! We practice all year around, every Saturday at 10. Link to comment Share on other sites More sharing options...
SUPERDUPER Posted January 30, 2012 Share Posted January 30, 2012 HERE IS SOME VIDEO FROM THIS WEEKEND, THE CZECHMATE RUNNING GREAT. Link to comment Share on other sites More sharing options...
burningsquirrels Posted January 30, 2012 Share Posted January 30, 2012 you've given me reason to make the hike to spartansburg one weekend Link to comment Share on other sites More sharing options...
PhotoJoe Posted January 30, 2012 Share Posted January 30, 2012 HERE IS SOME VIDEO FROM THIS WEEKEND, THE CZECHMATE RUNNING GREAT. Awesome! You switched the sliderack from right to left? Isn't it tight when you rest the thumb on the safety? Link to comment Share on other sites More sharing options...
SUPERDUPER Posted January 30, 2012 Share Posted January 30, 2012 CHANGED OUT WITH ONE FROM SVI IN TEXAS. IT IS BENT AT A 45 DEGREE ANGLE,WORKS GREAT. Link to comment Share on other sites More sharing options...
SUPERDUPER Posted January 30, 2012 Share Posted January 30, 2012 you've given me reason to make the hike to spartansburg one weekend COME ON THERE ARE A BUNCH OF GREAT GUYS... Link to comment Share on other sites More sharing options...
Heckler Posted January 31, 2012 Share Posted January 31, 2012 you've given me reason to make the hike to spartansburg one weekend COME ON THERE ARE A BUNCH OF GREAT GUYS... Jim let me shoot it after the match............WOW! That gun is amazing, the feel, the ergonomics, trigger and handling were great. Now I gotta sell my open gun.... Link to comment Share on other sites More sharing options...
MoonJeong Posted July 29, 2013 Share Posted July 29, 2013 Just got mine and testing loads and springs. What load works best for you, the video shows the gun shooting really flat... Wondering if its the load or fps of video. Also, did you reduce your recoil spring? Thanks! HERE IS SOME VIDEO FROM THIS WEEKEND, THE CZECHMATE RUNNING GREAT. Link to comment Share on other sites More sharing options...
bruised lee Posted August 17, 2013 Share Posted August 17, 2013 What are your OAL for the czechmate? Thanks Link to comment Share on other sites More sharing options...
bruised lee Posted August 17, 2013 Share Posted August 17, 2013 OAL for your load I mean..... Link to comment Share on other sites More sharing options...
mike_pinto Posted October 1, 2013 Share Posted October 1, 2013 I believe he is loading out to 1.165, as am I in the Czechmate. With the RN they are fine. I cannot get the MG JHP's to turn in the chamber at any length that is shootable. Link to comment Share on other sites More sharing options...
kneelingatlas Posted October 1, 2013 Share Posted October 1, 2013 I loaded out to 1.185" with 115s last weekend and I think they may have been the cause of a few failures to feed (3-4 out of 210 rounds). The big stick choked too. I plan to stick to 1.160". Link to comment Share on other sites More sharing options...
mike_pinto Posted October 2, 2013 Share Posted October 2, 2013 Yah, I am running 1.165 with MG 115's over 9 grains of HS-6. Nice load and you never have to worry about making major, in any country. Link to comment Share on other sites More sharing options...
Big Dog Howie Posted October 2, 2013 Share Posted October 2, 2013 Yah, I am running 1.165 with MG 115's over 9 grains of HS-6. Nice load and you never have to worry about making major, in any country. Do you know what your power factor is.I loaded 1.130 with 124 MTG with 8.5 grains of HS6 and chrono at 171 PF that's out of my CZ75 open gun with 2 port comp. did that this past Sat in about 88 degree temp Link to comment Share on other sites More sharing options...
mike_pinto Posted October 2, 2013 Share Posted October 2, 2013 It's 179 pretty constantly. I did load 124's at 1.155 over 7.8 grains of hs6 that gave me 175 but I didn't like the recoil impulse. I like the longer load for sure, but really liked shooting JHP's in my 2011. They will not chamber in the Czechmate at any shootable length. Link to comment Share on other sites More sharing options...
Big Dog Howie Posted October 2, 2013 Share Posted October 2, 2013 It's 179 pretty constantly. I did load 124's at 1.155 over 7.8 grains of hs6 that gave me 175 but I didn't like the recoil impulse. I like the longer load for sure, but really liked shooting JHP's in my 2011. They will not chamber in the Czechmate at any shootable length.Yea unfortunately I can't load much longer so the 124 work we'll. gun shoots pretty flat and is faster than me lol Link to comment Share on other sites More sharing options...
kneelingatlas Posted October 2, 2013 Share Posted October 2, 2013 My testing this weekend showed jacketed bullets to be slightly slower than plated. I made 174PF with 8.8gr HS6 pushing a plated bullet while 8.9gr behind a plated bullet made 173PF. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now