TCKev Posted July 23, 2010 Share Posted July 23, 2010 (edited) I just ordered a 9mm Trojan and was looking for mags. What are you running in your's. I ordered 3 Wilson ETM's with it but was curious about the new Dawson mag's. Thanks Kevin Edited July 23, 2010 by KWD Link to comment Share on other sites More sharing options...
kar45 Posted July 23, 2010 Share Posted July 23, 2010 I have a 6" Trojan in 9mm, Wilson ETM's purr like a kitten in it. Link to comment Share on other sites More sharing options...
BayouSlide Posted July 23, 2010 Share Posted July 23, 2010 Recently got a lightly used Trojan 9mm...the six Dawson mags with basepads for the Ice No Gap magwell that were included have run 100 percent. Curtis Link to comment Share on other sites More sharing options...
Bob DuBois Posted July 23, 2010 Share Posted July 23, 2010 I like the Wilson magazines but cut two coils off the magazine springs. I run a 9lb recoil spring and a 15lb mainspring. Usually shoot 147gn bullets at 130 power factor. I haven't seen the Dawson magazines yet. I hope you enjoy your Trojan as much as I do, it's fun. Link to comment Share on other sites More sharing options...
Will_M Posted July 23, 2010 Share Posted July 23, 2010 Wilson ETM's are a favorite around here. Link to comment Share on other sites More sharing options...
Duke Nukem Posted July 23, 2010 Share Posted July 23, 2010 I run the Springfield 9 rd mags. They work flawlessly. Link to comment Share on other sites More sharing options...
astephenson Posted July 23, 2010 Share Posted July 23, 2010 Tripp Research Cobra mags run like a champ in my 9mm STI Trojan. Link to comment Share on other sites More sharing options...
jbrought Posted July 23, 2010 Share Posted July 23, 2010 I like the Tripp Research mags in my Springer run 100% straight from Tripp. Link to comment Share on other sites More sharing options...
bubbadoc Posted July 24, 2010 Share Posted July 24, 2010 Wilson ETMs in my Trojan run great also. On any 9mm mag you buy just do a visual inspection to make sure the top of the mag and the ejector to assure clearance. Seem to recall some issues written up about that in the past Link to comment Share on other sites More sharing options...
speculatorking Posted July 24, 2010 Share Posted July 24, 2010 Metalform Link to comment Share on other sites More sharing options...
open17 Posted July 24, 2010 Share Posted July 24, 2010 Tried ETM's, had issues. Still working at getting them 100% Bought 5 Tripp's---flawless right out of the bag. Link to comment Share on other sites More sharing options...
davehorn Posted July 24, 2010 Share Posted July 24, 2010 (edited) ETMs would not run in my Dan Wesson PM9, Tripps run perfectly Edited July 25, 2010 by davehorn Link to comment Share on other sites More sharing options...
cyberiad Posted July 25, 2010 Share Posted July 25, 2010 I have a Kimber 9mm Stainless II that has run flawlessly with Tripp Cobramags. I wouldn't use anything else. Link to comment Share on other sites More sharing options...
TCKev Posted July 25, 2010 Author Share Posted July 25, 2010 Thanks for the reply's I'm gonna give the ETM's a shot and if I have trouble I'll try the Tripp's. That's what I'm running in my Trojan 40 but of course Virgil worked them and the gun over. Link to comment Share on other sites More sharing options...
steel1212 Posted July 25, 2010 Share Posted July 25, 2010 Thanks for the reply's I'm gonna give the ETM's a shot and if I have trouble I'll try the Tripp's. That's what I'm running in my Trojan 40 but of course Virgil worked them and the gun over. I run nothing but Tripps in my guns now. They just work! Link to comment Share on other sites More sharing options...
mrg Posted July 25, 2010 Share Posted July 25, 2010 ETMs would not run in my Dan Wesson, Tripps run perfectly Haven't tried Trips,but I can't get ETMs to lock the slid back on PM-9. Wilson's sent me regalements, but their no better. I have a 9MM Wilson on order for my wife, just kinda hoping they'll work in it. If not I'll sent the Wilson's back, I can always use more 47ds. Link to comment Share on other sites More sharing options...
Paul Burtchell Posted July 25, 2010 Share Posted July 25, 2010 Put about 3000 rounds so far through an STI Spartan in 9mm using the Dawson Extreme Tactical mags and the Dawson No Gap Base Pads and the Dawson No Gap Magwell. 100% reliable. The only problem is that they are tough to unload with more than 6 rounds left in the mag, but it is just a slight inconvenience. Link to comment Share on other sites More sharing options...
Shooter32 Posted July 25, 2010 Share Posted July 25, 2010 The Tripp's are great with no problems out of my Trojan !! Link to comment Share on other sites More sharing options...
TonyT Posted July 27, 2010 Share Posted July 27, 2010 (edited) I use Metalform mags - 40 S&W in my STI Trojan and 9mm or 38 Super in my Dan Wesson PM-9. Never had a problem with them. Edited July 28, 2010 by TonyT Link to comment Share on other sites More sharing options...
PSSOH22 Posted July 28, 2010 Share Posted July 28, 2010 i have found the tripp, wilson, chip mccormick, and dawson to run the best. I have heard good things from metalform but have no experience Link to comment Share on other sites More sharing options...
Dacsoft Posted August 1, 2010 Share Posted August 1, 2010 I like the Tripp Research mags in my Springer run 100% straight from Tripp. +1 on the Tripp Research. I use their 10 round magazines for IDPA. Link to comment Share on other sites More sharing options...
xinnix Posted October 2, 2010 Share Posted October 2, 2010 Dawson Precision great magazine. 9 and 10 round. Link to comment Share on other sites More sharing options...
Mike21STI Posted October 11, 2010 Share Posted October 11, 2010 I run the Tripps through My STI and haven't had any issues. Mike Link to comment Share on other sites More sharing options...
tony357 Posted October 11, 2010 Share Posted October 11, 2010 wilson tactical mags +1.. S&W ships this mag with their pro series.. Link to comment Share on other sites More sharing options...
Boxerglocker Posted October 12, 2010 Share Posted October 12, 2010 The 4 Tripps with .500x extension I bought have bee flawless thusfar in my Spartan 9mm. I use a Dawson gapped model MW. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now