steel1212 Posted June 2, 2010 Share Posted June 2, 2010 So at the last match a shooter comes to me and says I have jammed gun. I look at him and ask why didn't his RO take care of it. He says well the RO thanks that I should take care of it, me being the MD Ok so now my interest is up. We go over to a empty bay and he shows me a 1911 with a .45 round fed backwards. Now this round is still live. Only way to get it out is to move it back out of the chamber and that is from the primer side. So we take some oil and soak the snot out of it and luckily it pushes out, not hammers out. So what would you have done....? Link to comment Share on other sites More sharing options...
Loves2Shoot Posted June 2, 2010 Share Posted June 2, 2010 (edited) Laughed real hard. I would have soaked it and tapped it out, just like you did. Edited June 2, 2010 by Loves2Shoot Link to comment Share on other sites More sharing options...
steel1212 Posted June 2, 2010 Author Share Posted June 2, 2010 Laughed real hard. I would have soaked it and tapped it out, just like you did. Oh I wanted to give him the Gibbs head slap but I just laughed in stead lol. Link to comment Share on other sites More sharing options...
chirpy Posted June 3, 2010 Share Posted June 3, 2010 Depends on weather he put it in the mag backwards or not! LOL Not sure if the oil did any good or not! Did you try to fire that round after you got it out? MIght have been interesting to see. Richard Link to comment Share on other sites More sharing options...
Sullie Posted June 3, 2010 Share Posted June 3, 2010 If WD40 were available, I would have tried that. I have heard that it will "deactivate" live primers but I have never tried it. Sounds like it all worked out in the end. How did he get the round in backwards anyway? Did he load his mag with one round backwards or was this some standard malfunction turned even uglier by the shooter? Link to comment Share on other sites More sharing options...
steel1212 Posted June 3, 2010 Author Share Posted June 3, 2010 If WD40 were available, I would have tried that. I have heard that it will "deactivate" live primers but I have never tried it. Sounds like it all worked out in the end. How did he get the round in backwards anyway? Did he load his mag with one round backwards or was this some standard malfunction turned even uglier by the shooter? I'm guessing he loaded the round backwards. What confuses me is the fact that it completely, and I mean Completely chambered! If it wasn't for the bullet sticking out the slide would have closed. We didn't have WD40 we just used some oil of some sort. I was really just wanting it to seam around the brass so that I could push it out easier. Link to comment Share on other sites More sharing options...
CSEMARTIN Posted June 3, 2010 Share Posted June 3, 2010 As far as deactivating primers goes, I've always been interested in this topic. Years ago, I bought some 44 magnum brass (Winchester Super Vel) that had a brownish/black substance on the inside of the brass. I'm assuming it was a sealant? It made reloading next to impossible. The shell would get stuck on the belling/funnel thingy on the powder station of my 550 and it was a bear to get off. So I talked to the guy that sold me the brass and he tells me to soak the rounds in mineral spirits to break down this brownish/black crap on the inside of the case. After three weeks in mineral spirits the primers still went bang. So.....when someone tells me something will deactivate a primer, I'm always suspicious. I'm not sure what I would have done in this situation, but I certainly wouldn't hammer out a live round. Link to comment Share on other sites More sharing options...
Loves2Shoot Posted June 3, 2010 Share Posted June 3, 2010 I had success killing one with WD40 in a customer's rifle who ripped of the rim of a shell and then tried to pound it out from the bore (which only knocks the bullet into the case ) I soaked it over night before extracting the case. After emptying the powder, I could not set off the primer by striking it. Link to comment Share on other sites More sharing options...
G-ManBart Posted June 3, 2010 Share Posted June 3, 2010 A wooden dowel around bore size wouldn't set the primer off, but not everyone will have one of those handy at the range! Link to comment Share on other sites More sharing options...
Heckler Posted June 3, 2010 Share Posted June 3, 2010 Had the same thing happen 2 weeks ago. Shooter had a mag fall out during COF, rather than grab a new one he picked it up off the ground and reseated it. When he pushed it in I saw the top bullet flip off the top of the mag and land backwards. Before I could stop him he let the slide go forward. That is where I got him stopped. I had another shooter get my "40" dowel out of my bag and I pushed the round out easily. Link to comment Share on other sites More sharing options...
mrg Posted June 7, 2010 Share Posted June 7, 2010 I had this happen at a tactical class last month. Was the result of a rip, strip drill, We were using well worn homemade dummy rounds (no primers). An assistant wanted to shove a pen down the barrel, the instructor was not amused. His technique was a shotgun cleaning rod with large diameter threads (to avoid touching the absent primer). He also suggested a flat wooden dowel. Since it wasn't a live round, great training. Link to comment Share on other sites More sharing options...
Bear23 Posted June 7, 2010 Share Posted June 7, 2010 I've had it happen during stage. inserted a new mag (single stack), round spun around and my slide closed. after severely shaking the gun, it fell out. Link to comment Share on other sites More sharing options...
angus6 Posted June 8, 2010 Share Posted June 8, 2010 (edited) So I guess it wouldn't hurt to make an extra brass rod and countersink the center Edited June 8, 2010 by angus6 Link to comment Share on other sites More sharing options...
steel1212 Posted June 8, 2010 Author Share Posted June 8, 2010 So I guess it wouldn't hurt to make an extra brass rod and countersink the center I might have 3 made, 9mm, 40, 45. If you countersink the center a little it won't hurt the integrity that much. Link to comment Share on other sites More sharing options...
twodownzero Posted June 18, 2010 Share Posted June 18, 2010 I've had it happen during stage. inserted a new mag (single stack), round spun around and my slide closed. after severely shaking the gun, it fell out. I had two at A5 that way. .40s Link to comment Share on other sites More sharing options...
cas Posted June 22, 2010 Share Posted June 22, 2010 FWIW.. the "deactivation" is only temporary, once they dry out they'll fire again. You mentioned Super Vel, Lee Jurras told the story a couple years back of sending primed brass over seas to Norma that he thought he'd "deactivated", only to have them rather upset with him when they showed up live and working just fine. Link to comment Share on other sites More sharing options...
Odawgp Posted June 22, 2010 Share Posted June 22, 2010 A wooden dowel around bore size wouldn't set the primer off, but not everyone will have one of those handy at the range! I have squib rods in 22,40&45 cal that are cupped to fit over the bullet nose. It would have only contacted the case head and not the primer I'd a hammered it out if needed with either my squib rod or a 45cal dia wood dowel, we keep a few at every stage Link to comment Share on other sites More sharing options...
NuJudge Posted June 27, 2010 Share Posted June 27, 2010 I'd have used a Black Powder "worm": http://www.midwayusa.com/viewProduct/?productNumber=856133 Link to comment Share on other sites More sharing options...
Modoc Posted June 27, 2010 Share Posted June 27, 2010 I'd have used a Black Powder "worm": http://www.midwayusa.com/viewProduct/?productNumber=856133 Actually, I think that the BP Cleaning Jag on the end of a short rod would be better, since it is about bore sized and has a cupped end. Now that I really think about it, I am going to get several and set them up for the different calibers that we use - one shaft with caliber specific heads. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now