dagger10k Posted April 14, 2010 Share Posted April 14, 2010 I use snap caps when dry-firing, but that's apparently not enough. When I dry fire now, the thing the hammer hits gets stuck forward in the slide. I can push the firing pin back into the breech-face a bit, but that does not help. Surely this has happened to someone else before? I haven't been able to find any instructions about how to disassemble the slide, and I don't want to risk hurting it more. Any help would be greatly appreciated! Thanks Link to comment Share on other sites More sharing options...
eerw Posted April 14, 2010 Share Posted April 14, 2010 what model CZ? probably just dirty. Link to comment Share on other sites More sharing options...
dagger10k Posted April 14, 2010 Author Share Posted April 14, 2010 75b in .40. If it's dirty I guess I need to get it apart anyway. Link to comment Share on other sites More sharing options...
eerw Posted April 14, 2010 Share Posted April 14, 2010 75b in .40. If it's dirty I guess I need to get it apart anyway. with a 75b, the firing pin is held in place by the roll pin in the side of the slide. you need to tap this roll pin out. make sure you cover up the rear of the slide so the firing pin doesn't come out when the roll pin comes out. after the roll pin is out. the firing pin should come out partway. the firing pin block is now holding it in. now depress the block and the firing pin will come out the rest of the way. then the block will come out. check your firing pin for burrs. check the spring, clean out the tunnel. see if that helps. Link to comment Share on other sites More sharing options...
dagger10k Posted April 14, 2010 Author Share Posted April 14, 2010 Ah! Excellent. It's not broken. Just gummed up. I did manage to destroy both roll pins however. Maybe they would have something at ace or somewhere? I'd like to shoot in a match this weekend, no time to order stuff online. Thanks for the help! Link to comment Share on other sites More sharing options...
noypi916 Posted April 14, 2010 Share Posted April 14, 2010 Good shooting with you last Sunday in the rain. So you going to CAPSL this Saturday? I might go there too. Link to comment Share on other sites More sharing options...
dagger10k Posted April 14, 2010 Author Share Posted April 14, 2010 Sadly, no, got other things to do on Saturday. Hope to go to NCPS though. Shooting in the rain is always fun! Link to comment Share on other sites More sharing options...
CocoBolo Posted April 14, 2010 Share Posted April 14, 2010 Ah! Excellent. It's not broken. Just gummed up. I did manage to destroy both roll pins however. Maybe they would have something at ace or somewhere? I'd like to shoot in a match this weekend, no time to order stuff online. Thanks for the help! Harbour freight sells an expensive small punch set that works well for driving these pins, also they have a bunch of hammers of all types. Here are some Cz parts listings for you: https://shop.cz-usa.com/item_detail.aspx?ItemCode=0330025001 https://shop.cz-usa.com/item_detail.aspx?ItemCode=0420033001 https://shop.cz-usa.com/item_detail.aspx?ItemCode=0420063271 https://shop.cz-usa.com/item_detail.aspx?ItemCode=0420065101 https://shop.cz-usa.com/item_detail.aspx?ItemCode=0420034001 Most times I receive orders in 3 or 4 working days. Link to comment Share on other sites More sharing options...
noypi916 Posted April 14, 2010 Share Posted April 14, 2010 Sadly, no, got other things to do on Saturday. Hope to go to NCPS though. Shooting in the rain is always fun! Yeah, I will be at the NCPS this month. See you at the range. Link to comment Share on other sites More sharing options...
dagger10k Posted June 9, 2010 Author Share Posted June 9, 2010 Does anyone know where I could get the roll pin? I looked at the CZ USA shop, and couldn't find anything. Mine doesn't hold the FP in anymore. Thanks! Link to comment Share on other sites More sharing options...
DWFAN Posted June 9, 2010 Share Posted June 9, 2010 I would call them. May not be online, but they'll have it and it would be the right one instead of guessing at a hardware store. Link to comment Share on other sites More sharing options...
eerw Posted June 9, 2010 Share Posted June 9, 2010 Does anyone know where I could get the roll pin? I looked at the CZ USA shop, and couldn't find anything. Mine doesn't hold the FP in anymore. Thanks! call them or Angus's shop..usually not listed. also its a double roll pin. also Jim Miossi has them http://miossigunworks.com/closed%20on_line_catalog.html Link to comment Share on other sites More sharing options...
1SOW Posted June 16, 2010 Share Posted June 16, 2010 (edited) Angus has always been fast for me using 'Priority Mail'. It might get there in time if you call and order a.m.. P.S. If you put an 'O'-ring that fit's snugly under the hammer, It will eliminate pin damage with or without snap caps. Edited June 16, 2010 by 1SOW Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now