suesstech Posted October 14, 2011 Share Posted October 14, 2011 (edited) Something tells me all of ours probably look the same, M1 extended chokes as well. This pic is a little older. http://suesstech.com/pics/shotty.jpg Edited October 14, 2011 by suesstech Link to comment Share on other sites More sharing options...
sqrlnts Posted October 17, 2011 Share Posted October 17, 2011 I am also running this shotgun. Shot my first slugs through the gun this weekend. I shot two slugs and they both hit low and left about 8" at 50 yards. I let my friend shoot two and his also landed low and left about 10". Was using the improved cylinder choke with standard 1oz slugs. Need to try the modified choke to see if they will group tighter. Link to comment Share on other sites More sharing options...
ksmirk Posted October 18, 2011 Share Posted October 18, 2011 Welcome to the club! seems to be growing. From my shotgun the difference between IC, Cyl was nothing as far as impact at 50 yards. I added that fiber optic sight on the front and at 50 it prints right below the sight and you go out to 100 yards for the most part your gonna hit the end of a 5 gallon bucket everytime if you don't flinch LOL. What slugs have you shot? the Remington reduced recoil seem to be my favorite and the shotgun likes them well also, it also like the full house Federal 1oz. I still have a few to try out but not a great fan of slugs unless I just have to shoot them! just installed as Kick Ezz recoil pad a couple of hours ago so we'll see what happens this weekend. Have you done any mods to your shotgun? interested to hear what everyone has done so far. Later, Kirk Link to comment Share on other sites More sharing options...
ksmirk Posted October 22, 2011 Share Posted October 22, 2011 Another match under the CZ's belt and it ran 100% the Kick EEZ recoild pad is a nice touch for sure as we got to shoot a couple slugs today and had to fire one left handed, I'm not so good left handed so I found another thing to practice :-) Later, Kirk Link to comment Share on other sites More sharing options...
sschultz Posted October 25, 2011 Share Posted October 25, 2011 I put a new stock on mine and I took it our PD range. I shot Federal low recoil LE slugs through it. WOW standing unsupported I put 4 shots touching at 25 yards with a called 5th shot flyer. I think I have the IC factory choke in now. Very impressed. I may have to order a case of slugs. Schultz Link to comment Share on other sites More sharing options...
fastmtnbiker33w Posted October 25, 2011 Share Posted October 25, 2011 What kind of stock did you put on it? Pics please! Link to comment Share on other sites More sharing options...
sschultz Posted October 25, 2011 Share Posted October 25, 2011 I modified a Remmington Choate and put that on. The reciever of the CZ is wider than the 870 so I built the stock up with JB weld and sanded and painted it. I will try and get pics up tonight. Link to comment Share on other sites More sharing options...
fastmtnbiker33w Posted October 30, 2011 Share Posted October 30, 2011 I think I need to finally clean my gun. I shot a 3-gun match yesterday with 4 stages of shotgun. Three times I had an empty hang up on upon ejection. Twice it was easy as when I pulled it out the bolt closed on the next round once and another time it was on the last shot fired. One time I had to hit the bolt release afte removing the empty. I'll pull it apart, send my lifter off to C-Rums......finally....and drill out the gas ports just a little. I'll find out how dirty it is too. Maybe I'll remember to take some pics and get them up here. Link to comment Share on other sites More sharing options...
ksmirk Posted October 30, 2011 Share Posted October 30, 2011 What dram loads were you shooting if you don't mind me asking? I might have a little trick up my sleeve to pass on to ya :-) Later, Kirk Link to comment Share on other sites More sharing options...
fastmtnbiker33w Posted October 30, 2011 Share Posted October 30, 2011 What dram loads were you shooting if you don't mind me asking? I might have a little trick up my sleeve to pass on to ya :-) Later, Kirk 3 1/4 dram on the shot and 1600 fps 1 oz slugs. Link to comment Share on other sites More sharing options...
fastmtnbiker33w Posted October 31, 2011 Share Posted October 31, 2011 If anyone knows how to load photos from an iPad, let me know. Sometimes I wonder why I even bother cleaning guns. Probably about 200 rounds through it since last cleaned. It sat all summer uncleaned and I've shot 2 matchs and practiced with it a few times since I came home from summer travels. I guess I need to shoot it more or something.....but then I'd go broke buying ammo. This thing is not dirty. Some carbon I think I'm going to hold off on the lifter mod as I've yet to get my thumb caught in it. May smirk's tip that he pm'd me. I'm hesitant to cut springs....but what the hell. Link to comment Share on other sites More sharing options...
ksmirk Posted October 31, 2011 Share Posted October 31, 2011 Drink you a couple of beers it makes it easier LMAO kinda keep those PM conversations on the down low as some folks might frown upon things. The first time I know the guy who did mine would not screw something up and like me and this someone talked about springs are pretty cheap. I'm trying to find a spring maker to make a few of the light springs in the weights I have now and some a touch lighter thru heavy to the factory spring rate so I can find out what works then if all else fails and we can't get them from CZ we will have springs with nice square ends at the spring rates we can run powder puff loads from a shotgun made to shoot 3 1/4 dram loads. If it's not dirty you need to shoot more :-) Later, Kirk Link to comment Share on other sites More sharing options...
fastmtnbiker33w Posted October 31, 2011 Share Posted October 31, 2011 Springs are strange beasts. Luckily most of them are fairly inexpensive. I thought keeping things on the down low was against forum rules. What's the word on that bolt release Kampr? You gonna make some more and sell them to us? ....and I did end up using the bronze brush on the gas rings. They were kind of nasty. Link to comment Share on other sites More sharing options...
ksmirk Posted November 3, 2011 Share Posted November 3, 2011 Haven't seen pics of that stock yet ;-) Later, Kirk Link to comment Share on other sites More sharing options...
sschultz Posted November 8, 2011 Share Posted November 8, 2011 ksmirk I haven't forgot the pics I ahve never posted pics before and I am trying to get some help. Schultz Link to comment Share on other sites More sharing options...
speederx7 Posted November 8, 2011 Share Posted November 8, 2011 has anyone tried the ati stock? board wont let me post a link due to my newbie status. Link to comment Share on other sites More sharing options...
speederx7 Posted November 8, 2011 Share Posted November 8, 2011 do a search of cz 712 ati on you tube and you will see a product review. Sorry, board will not let me post a link due to my lower post count Link to comment Share on other sites More sharing options...
glazer1972 Posted November 9, 2011 Share Posted November 9, 2011 Is the triggerguard aluminum? Link to comment Share on other sites More sharing options...
ksmirk Posted November 11, 2011 Share Posted November 11, 2011 I sure isn't plastic! pretty sure it's Aluminum or some form of light metal. If your thinking about getting one go ahead the mods you need to do are simple and don't take much to get going. Later, Kirk Link to comment Share on other sites More sharing options...
glazer1972 Posted November 11, 2011 Share Posted November 11, 2011 I sure isn't plastic! pretty sure it's Aluminum or some form of light metal. If your thinking about getting one go ahead the mods you need to do are simple and don't take much to get going. Later, Kirk Does anyone know where we can get a schematic. Be interested in seeing if I could find enough US parts for compliance. Link to comment Share on other sites More sharing options...
sschultz Posted November 12, 2011 Share Posted November 12, 2011 glazer If you go to the CZ web site and go to parts they have a parts list and a schematic. I just bought a Nordic Mossberg bolt handle and had it cut and welded to my stock bolt handle. The last thing left is a Briley bolt release and I'm done. Some of you guys with the Benelli have had the bolt lightened what does that do? Schultz Link to comment Share on other sites More sharing options...
glazer1972 Posted November 14, 2011 Share Posted November 14, 2011 glazer If you go to the CZ web site and go to parts they have a parts list and a schematic. I just bought a Nordic Mossberg bolt handle and had it cut and welded to my stock bolt handle. The last thing left is a Briley bolt release and I'm done. Some of you guys with the Benelli have had the bolt lightened what does that do? Schultz I found the parts list and schematic. I don't think I would ever find enough US Parts to make it a go. Link to comment Share on other sites More sharing options...
speederx7 Posted November 17, 2011 Share Posted November 17, 2011 (edited) glazer If you go to the CZ web site and go to parts they have a parts list and a schematic. I just bought a Nordic Mossberg bolt handle and had it cut and welded to my stock bolt handle. The last thing left is a Briley bolt release and I'm done. Some of you guys with the Benelli have had the bolt lightened what does that do? Schultz I found the parts list and schematic. I don't think I would ever find enough US Parts to make it a go. glazer, are you refering to 922r compliance? what mods are planning that will put you over? Edited November 17, 2011 by speederx7 Link to comment Share on other sites More sharing options...
glazer1972 Posted November 21, 2011 Share Posted November 21, 2011 (edited) glazer If you go to the CZ web site and go to parts they have a parts list and a schematic. I just bought a Nordic Mossberg bolt handle and had it cut and welded to my stock bolt handle. The last thing left is a Briley bolt release and I'm done. Some of you guys with the Benelli have had the bolt lightened what does that do? Schultz I found the parts list and schematic. I don't think I would ever find enough US Parts to make it a go. glazer, are you refering to 922r compliance? what mods are planning that will put you over? Yes. The extended Mag tube. Edited November 21, 2011 by glazer1972 Link to comment Share on other sites More sharing options...
gerritm Posted November 26, 2011 Share Posted November 26, 2011 I ordered a CZ712 utility today to set up for a back up for me and for my son for 3-gun. I am going with Nordic components for the +4 mag extension. Any extended bolt handles available without modifying one? Any other advice or ideas? I see you can drill out the gas ports and have Crums weld the lifter. He did a great job on my SX3. Thanks, gerritm Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now