zfields Posted May 17, 2013 Share Posted May 17, 2013 Got a couple quotes, still not to the point where I can offer it at a price that would be fair. The extra slots are what is killing it, but I'm worried about the extra weight effecting reliability. Link to comment Share on other sites More sharing options...
burningsquirrels Posted May 17, 2013 Share Posted May 17, 2013 How about a paddle like the first one without any fancy cuts? Or, make it a little smaller with no cuts? Link to comment Share on other sites More sharing options...
zfields Posted May 17, 2013 Share Posted May 17, 2013 How about a paddle like the first one without any fancy cuts? Or, make it a little smaller with no cuts? That paddle saddly is a complete no go. My quotes at 30+ units were 90 EACH just for production. Link to comment Share on other sites More sharing options...
ksmirk Posted May 20, 2013 Share Posted May 20, 2013 Yeah from what I have run into is anything under 100pcs is gonna cost a bunch! like my springs I had made, I went in the hole on those but just wanted to help you fella's out,now if I'd have made 100 set's I'd have not taken a beating. It's hard to get anything made for a reasonable cost in small qty's zfields I've got an idea for you, might not be as cool but it would work well. Shoot me a pm if you'd like the idea, my guys are busy so I can't get anyone to take time away from normal production. Later, Kirk Link to comment Share on other sites More sharing options...
fastmtnbiker33w Posted May 21, 2013 Share Posted May 21, 2013 Anyone have a 3d printer? Link to comment Share on other sites More sharing options...
burningsquirrels Posted May 21, 2013 Share Posted May 21, 2013 how about just having a threaded end, lol. let us figure out what to put on it haha. shape up a threaded rod to go in the bolt. i'll thread a hardwood handle on it. Link to comment Share on other sites More sharing options...
zfields Posted May 21, 2013 Share Posted May 21, 2013 how about just having a threaded end, lol. let us figure out what to put on it haha. shape up a threaded rod to go in the bolt. i'll thread a hardwood handle on it. That's funny, I was talking to a buddy of mine, and we were bouncing around just putting a 1/2x28 thread on it, and you can stick an AR muzzle device of your choice on it. Link to comment Share on other sites More sharing options...
burningsquirrels Posted May 21, 2013 Share Posted May 21, 2013 i bet you could start with a threaded rod or rebar, and just cut the part that goes into the bolt, lol. it'd give us something to do with those stupid A2 flash hiders!! Link to comment Share on other sites More sharing options...
zfields Posted May 21, 2013 Share Posted May 21, 2013 i bet you could start with a threaded rod or rebar, and just cut the part that goes into the bolt, lol. it'd give us something to do with those stupid A2 flash hiders!! the only problem is you go from 5.95mm, to 4.5mm, then back up to whatever handle size you want to do. Link to comment Share on other sites More sharing options...
burningsquirrels Posted May 21, 2013 Share Posted May 21, 2013 Meh. I'll just pay someone to shoot my shotgun stages for me. Link to comment Share on other sites More sharing options...
zfields Posted May 21, 2013 Share Posted May 21, 2013 Meh. I'll just pay someone to shoot my shotgun stages for me. Awe cmon, shotgun is the best part Happen to seen a big bucket of A2's for cheap I think that may get this price point down into doable territory. Link to comment Share on other sites More sharing options...
burningsquirrels Posted May 21, 2013 Share Posted May 21, 2013 Meh. I'll just pay someone to shoot my shotgun stages for me. Awe cmon, shotgun is the best part Happen to seen a big bucket of A2's for cheap I think that may get this price point down into doable territory. Link to comment Share on other sites More sharing options...
Langenator Posted May 21, 2013 Share Posted May 21, 2013 What, you don't want to go retro with a 3-prong? Link to comment Share on other sites More sharing options...
Langenator Posted May 23, 2013 Share Posted May 23, 2013 (edited) The -712U can pretty up right nicely, I think. Cerakote by Coleburn Armory Edited May 23, 2013 by Langenator Link to comment Share on other sites More sharing options...
burningsquirrels Posted May 23, 2013 Share Posted May 23, 2013 (edited) For some reason I couldn't get that clamp to work with mine... : shrug : Only mods are a tricomp front sight, nordic +4 tube, lifter welded by crums, then enlarged the gas ports and trimmed the spring a little. Runs like a champ. Edited May 23, 2013 by burningsquirrels Link to comment Share on other sites More sharing options...
RDF5186 Posted May 23, 2013 Share Posted May 23, 2013 Nice setup!! I need to get mine coated that looks great!! Link to comment Share on other sites More sharing options...
kfd147 Posted May 23, 2013 Share Posted May 23, 2013 The -712U can pretty up right nicely, I think. Cerakote by Coleburn Armory That looks awesome! The 75 needs to be that color too. Jason Link to comment Share on other sites More sharing options...
Langenator Posted May 23, 2013 Share Posted May 23, 2013 The pistol is a -97B (because .45), and actually belongs to Mr. Coleburn. I don't know if the maroon would go as well with the wood grips. I like the dark look with the black furniture. Now, if CZ decided to market a semi version of their new assault rifle in the States, I could get one of those and an SP-01 and run an all Czech battery... Link to comment Share on other sites More sharing options...
burningsquirrels Posted May 23, 2013 Share Posted May 23, 2013 Now, if CZ decided to market a semi version of their new assault rifle in the States, I could get one of those and an SP-01 and run an all Czech battery... Then we could really have a CZ 3-Gun team Link to comment Share on other sites More sharing options...
fastmtnbiker33w Posted May 23, 2013 Share Posted May 23, 2013 The pistol is a -97B (because .45), and actually belongs to Mr. Coleburn. I don't know if the maroon would go as well with the wood grips. I like the dark look with the black furniture. Now, if CZ decided to market a semi version of their new assault rifle in the States, I could get one of those and an SP-01 and run an all Czech battery... Almost all Czech. The shotgun is Turkish. Gobble gobble. Link to comment Share on other sites More sharing options...
Langenator Posted May 23, 2013 Share Posted May 23, 2013 I know, but it's as close as you're going to get. Link to comment Share on other sites More sharing options...
usmc90 Posted May 26, 2013 Share Posted May 26, 2013 I got the CZ 712 but not the utility as i wanted a longer barrel( 26" personal choice) ..other than a mag tube what are the "hot set-ups" for these? right now i have ordered a Briley +10 mag tube and next getting the tomstone HI-VIZ sight package..but wondering about opening gas ports , changing/reworking trigger , and polishing slides etc.. anyone had any luck with the latter of those things? Link to comment Share on other sites More sharing options...
gerritm Posted May 27, 2013 Share Posted May 27, 2013 We have not done anything to my son's CZ other than swap the stock to an Akita adj. stock and the Nordic mag tube and plus 1 cap. I made sure there was not any sharp edges in the loading port or lifter, but have not welded the lifter or changed anything else. The gun runs great. Shot a match @ CCC yesterday with Langenator's great looking CZ and my son's and after a couple of hundred tough shots they both worked perfect. My son was shooting Estate game and target loads, 3.25 dram and 1 oz. shot, $6 a box ammo. Don't see any need to mess with success. gerritm Link to comment Share on other sites More sharing options...
Langenator Posted May 28, 2013 Share Posted May 28, 2013 I ran Rio #8 target loads and #7.5 Estate in mine, plus a few Remington Sureshot #6. Even ran some random range pick up shells and everything ran great. The only thing I've done to mine is add a Nordic tube, follower, and clamp, plus a Hi-Viz sight. That and the Aggie maroon Cerakote job. If I could find a charging handle and a +1.5" tube cap, I'd add those. Link to comment Share on other sites More sharing options...
zfields Posted May 29, 2013 Share Posted May 29, 2013 I ran Rio #8 target loads and #7.5 Estate in mine, plus a few Remington Sureshot #6. Even ran some random range pick up shells and everything ran great. The only thing I've done to mine is add a Nordic tube, follower, and clamp, plus a Hi-Viz sight. That and the Aggie maroon Cerakote job. If I could find a charging handle and a +1.5" tube cap, I'd add those. Still working on the handle....I think I found the shop to do it Sent from my Incredible 2 using Tapatalk 2 Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now