Search the Community
Showing results for tags 'optics ready'.
Found 3 results
Because there isn’t a lot of information about it, I thought I would share how I set up my P10F for USPSA Carry Optics. Current Setup: P10F Optics Ready Cajun Gunworks -10320 Reduced Pull Striker and Spring, my trigger breaks at 3.0 lbs YMMV. - P10F Hardened Stainless Guide Rod w/ 15 lb recoil spring. CZ Custom: -Mounting Plate for Vortex Razor -140mm Extensions (Factory spring and follower for 22 reloadable) HB Industries Theta Trigger Shoe Talon Grips Vortex Razor 6 MOA As far as work I’ve done to the gun, I polished the contact services (Sear shelf, striker safety, etc). I’m running a BBI 135gr at around 134 PF, and I found that the 15 lb spring from Cajun allows the dot to track nicely. I’ve tried flat wire Glock springs, 11, and 13 lb and determined that I personally prefer the 15 lb. Striker Springs: Glock springs work, I’ve tried a Zev 2 lb spring, this dropped the pull weight down to 2.5 lb, but was only 95% reliable on Federal primers. That being said I may still try a 3lb Zev spring, but at this point I’m content with where the gun is at as far the trigger is concerned. Mags: I like the CZ Custom Extensions, though I haven’t had a chance to try the Springer extensions (the set screw thing steers me away). I’m current using the factory spring and follower for 22 reloadable. I’m going to try the Grams P series spring and follower kit. I have read that some folks are trimming the STI 11-coil spring and followers to around 29mm front to back and have had good results, and I know that the CZC 10-coil will work as well. I have also heard that Henning has a P series 140mm extension in the works, I will definitely pick these up. Miscellaneous: It seems that this gun doesn’t like round nose flat point profile bullets, even loaded down to 1.07” OAL. It really likes the BBI 135gr and the Gallant 147gr. STICK WITH ROUND NOSE. I think that sums it up for me, hopefully someone finds this useful. I prefer this setup over the Shadow/S2, for various reasons. This gun is a very viable, and underrated IMo, for USPSA Carry Optics.
Does anyone have info on which red-dots that would give me some kind of cowitness on a P10C OR? The question regards P10C OR. That is: P10C ready for optics from factory, and optics mounted with CZ's mounting plates. From pictures on CZ's sites, it seems like the European version has a taller front iron sight compared to the US version. What I mean with cowitness is that I can at least use the iron sights as a backup, in case of red dot malfunction. It is ok, or even good if the iron sight does not line up exact in the dot. I am in particular interested if someone knows if you would get cowitness with Vortex Venom and the European CZ P10C OR, without changing iron sights. I am interested also in experiences with any other setup on the P10C OR. From images on the internet, it seems like you would get cowitness with Shield RMS.
Up until today I’d been running Campro 147’s with Vihtavuori N320 through my non-optic ready Shadow 2. I discovered that the Optic Ready isn’t loving that combination quite as much, but it sure does love the 124’s. Making a switch in my reloading as soon as I’ve shot through the 147’s reloads.