Search the Community
Showing results for tags 'grauffel'.
Found 1 result
Those that know me, know this has been a long time coming. Hope this is a helpful little nugget I wrote up. This is just some stuff I like and what I use. Having used just about every part and part combo this is what works for me. I have reasons for each part. I get alot of questions and i hope this finds some well. As always YMMV. @PatriotDefense @johnbu 9mm GT Stroked slide Beveled mag well(transition between mag well helps smooth reloads) Tuned 9mm Extractor(typically factory extractor is 38. 9mm needs more tension for reliability) Polished and Lapped rails. Hammer face angled and polish(smoothes recoil and slide movement) Hammer strut hole opened and smoothed( eliminates spring bind and friction. Also a must for única hammer ( Slide faced and comp(if needed) retimed. Breach Face inner edge chamfer and polish (smooth feeding) Extractor Channel polish( crud gets built up here. This ensures free movement ) Fireing Pin channel polish.(reliable strikes) Slide bottom front Chamfer(reduce's drag on 2nd round and reliable feeding) Slide rear bottom Chamfer(smooths recoil as slide travels over hammer) FPB removal( not needed in open. Reduces FP drag) All before adding parts. My favorite parts list and combos V12 barrel EGD Brass grips(bring weight back into hands) DAA adjustable thumrest, hand checkered by me Henning Mag well Gen 1( design keeps magwell from walking forward) Over sized Safeties, hand checkerd by me( more dexterity) Henning short Trigger(medium spring) PD Light Guide Rod PD Fireing pin(heavy for reliability) Única DA/SA heavy hammer(used as SA only) #patriotdefense bolo disconnector( eliminates pre travel) EGW sear (gives shortest reset) 6-9lb recoil spring (I prefer 8lb) PD 13lb hammer spring( works with heavy hammer and pd parts) PD reduced Power FP spring Xtra power Extractor spring 9mm Extractor PD reduced Sear spring Precision made sear cage pin made by me( eliminates sear cage + sear wobble, and a crisper disengagement on trigger press) Factory polished sear cage( less friction on moving sear) Xtreme G2 racker or Angled G1 racker. Xtreme trigger plunger Factory trigger bar (almost need to own several to pick best one) Over sized mag release(factory) IPSC Alex RTS2 mount 8 MOA RTS2 or 8 MOA slide ride Única Hammer short strut. #dgbullets 115g bullets HS6 or AA7 powder Current Slide/Frame combo Older Limited frame with better checkering and up swept beaver tail GT slide V12 9mm stroked. Also Tanfoglio 40s&w slides will and can to be tuned to run 9mm reliably with a 9mm barrel obviously. The Spare GT barrel that comes with the gun, can also be used with limited slide in conjuction with cone comp. This is basically what you have to do to the GTs and this is thee best parts and parts combos I've used and found. Enjoy.