Search the Community
Showing results for tags 'gas'.
Found 4 results
This thing is awesome. In a small brief testing period of my own, it far beats out the V12. Less Powder, 115g Major, and much softer in hand. I do not have this barrel reamed by the good folks at PD yet. I was very anxious to test it out and quickly made up some loads I knew wouldn't touch major with a 115 from the V12, but Might with the Durso comp. Sure enough I made 166pf with 115g Blues over 7.9g of Power pistol. Loaded @ .....1.06. I can't wait to do more testing with a better powder and after reaming. Thoughts are on AA7.
I have an AR-15 running the following setup: 12.5" Midlength gas Triarc TRACK barrel Silencerco Omega (dedicated suppressed) RCA low mass BCG SLR Sentry 7 adjustable gas block A5 buffer tube A5 buffer (reduced weight using KAK aluminum weights) Tubbs flatwire spring Function is consistent and 100% reliable with any one single type of ammunition, BUT I am having issues with ammo sensitivity when changing from different loads. In previous builds using similar components (but 16" mid and non-suppressed) I have had a wide band of reliabilty. Once gas is properly set the rifle runs to BHO with everything from weak steel cased 223 to full house 77gr 5.56 ammo. When gas is tuned for the 12.5" rifle listed above I get flawless performance (4 o'clock ejection and BHO) from roughly 50% of the different ammo types I shoot. The other 50% ejects at 2:00 to 2:30 and makes the gun vibrate harshly when shooting. Function is 100% consistent when running a single type of ammo. If I decrease gas by one click I lose BHO on the softer ammo, and the more violent cycling ammo will then cycle smoothly. To clarify, some low pressure 223 cycles violently and some cycles properly. (I.E.5.56 55gr XM193 cycles violently, but 5.56 77gr MK262 Mod1 cycles smooth.) What gives?! Any suggestions to remedy the problem? EDIT: OPTION #1 Would anyone recommend replacing the low mass BCG with the Bootleg adjustable BCG? https://www.weaponoutfitters.com/bootleg-adjustable-carrier.html PROS- On the fly fine tuning between gas settings. CONS- Added mass, possibly added maintenance, cost. OPTION #2 Should I skip all this head-scratching and just shoot ammo that functions properly in my rifle? Or is it wrong to run my rifle in such a narrow window of operation?
Hi fellas, With a properly tuned adjustable gas block. a properly weighted captured buffer spring, a lightweight BCG, and a decent brake/comp, will I be able to tell a noticeable difference in perceived recoil between a Stretch 16 (intermediate gas) and a BA Hanson (or other similar mid-length gas) barrel? Thanks!