Search the Community
Showing results for tags 'firing pin block'.
Found 1 result
So, I know this has been discussed in other threads, but I am having trouble getting a consensus from everyone of which is the best option. I currently have the Henning 4th gen firing pin with the titan hammer with 1 piece sear and extended FPB (0.508" I think) in my Stock II (large frame). At a match last night I was having a bunch of light strikes, until I removed the FPB all together, then the gun ran 100%. The FP was also not reliably blocked by the FPB with the hammer cocked as it should. The light strikes would suggest to me that the FPB is still too short and that I may have to remove a bit of material from the curved surface on the inside of the cut out. (opposite of the tab that actually blocks the FP) Or I may just have to polish it better. My understanding is that the different profile without the flutes of the Henning Gen 3, as well as the extended EG Xtreme FP will both work, but which seems to work better for people? More reliable? Allowing the use of lighter springs and lower trigger pulls? I also love that the Henning firing pins are advertised as being made lighter and lighter, while the EG Xtreme, is advertised as being heavier than the OE part, lol. Anyone have any thoughts on that?