Search the Community
Showing results for tags 'disconnector'.
Found 2 results
Hey there, I have a small problem with my shadow. If I pull the DA slowly, the hammer will not fall, upon further inspection the sear does not lift high enough and thats what is holding it back. the Hammer travels rearwards just far enough to set the sa claws. If I manually and slowly pull the hammer back, there is interference between the hammer and sear in both DA and SA. It seems like the sear never lifts high enough. the trigger is hitting against the frame (most rearward position) and if i wiggle the trigger or safety, the hammer will fall. A little history on the gun itself: Bought it used with supposedly low (1000) roundcount and I have put ~15k rounds on it plus tons of dryfire -85C trigger - No overtravel screw (it fell out) -11.5lb mainspring (tried 13lb as well) -11lb recoil spring (tried 13lb as well) -light deburing / polishing -grips and sights Any help will be greatly appreciated thanks! John.
Hi goodfellas, Few hours ago I installed short reset disconnector on my CZ Shadow 2. In DA mode hammer travels to aproxim. point of half cocked position and falls. In SA mode reset is short and crisp (like it should be). Since that I have match in 2 days ... please help. TiA P.S. Sorry for not using search engine ..... currently in panic mode