Search the Community
Showing results for tags 'cajun gun works'.
Found 4 results
Because there isn’t a lot of information about it, I thought I would share how I set up my P10F for USPSA Carry Optics. Current Setup: P10F Optics Ready Cajun Gunworks -10320 Reduced Pull Striker and Spring, my trigger breaks at 3.0 lbs YMMV. - P10F Hardened Stainless Guide Rod w/ 15 lb recoil spring. CZ Custom: -Mounting Plate for Vortex Razor -140mm Extensions (Factory spring and follower for 22 reloadable) HB Industries Theta Trigger Shoe Talon Grips Vortex Razor 6 MOA As far as work I’ve done to the gun, I polished the contact services (Sear shelf, striker safety, etc). I’m running a BBI 135gr at around 134 PF, and I found that the 15 lb spring from Cajun allows the dot to track nicely. I’ve tried flat wire Glock springs, 11, and 13 lb and determined that I personally prefer the 15 lb. Striker Springs: Glock springs work, I’ve tried a Zev 2 lb spring, this dropped the pull weight down to 2.5 lb, but was only 95% reliable on Federal primers. That being said I may still try a 3lb Zev spring, but at this point I’m content with where the gun is at as far the trigger is concerned. Mags: I like the CZ Custom Extensions, though I haven’t had a chance to try the Springer extensions (the set screw thing steers me away). I’m current using the factory spring and follower for 22 reloadable. I’m going to try the Grams P series spring and follower kit. I have read that some folks are trimming the STI 11-coil spring and followers to around 29mm front to back and have had good results, and I know that the CZC 10-coil will work as well. I have also heard that Henning has a P series 140mm extension in the works, I will definitely pick these up. Miscellaneous: It seems that this gun doesn’t like round nose flat point profile bullets, even loaded down to 1.07” OAL. It really likes the BBI 135gr and the Gallant 147gr. STICK WITH ROUND NOSE. I think that sums it up for me, hopefully someone finds this useful. I prefer this setup over the Shadow/S2, for various reasons. This gun is a very viable, and underrated IMo, for USPSA Carry Optics.
Ask anyone, I love my CZ Shadow 2’s, but that 10+ D/A trigger pull was off the Wheeler Trigger Pull Scale, what’s with that? Polishing and spring changes brought it down to a respectable sub 5.4lbs and about a 25% reduction in the S/A as well. Totally worth doing and will tackle my practice/range OR S2 At some point as well. Also, what’s with the pot metal that’s being used for the ridiculously overpriced torx bolts being used to hold the grips, mag release and optic plates on? Part of a playlist 1/12.......................................................................................................................
Good day, everyone! I'm looking for an instructional video on detailed disassembly for CZ Shadow 2. I've searched Youtube already, and kept finding one for CZ 75 SP01 Shadow. Are the steps on disassembly really similar for these two? If not, I would really appreciate if anyone can send me a link for one. It doesn't have to be a video as long as the instructions are clear and detailed. I just preferred video since i'm more of a visual person. I appreciate any help and thank you in advance!
I made a mistake ordering a part from Cajun Gun Works. One call to David and he's mailing the replacement right away. Painless!!! Thank you!!! Every once in a while a vendor at work and for my hobby just blows me away with the excellent way they treat customers.