Search the Community
Showing results for tags '2'.
Found 2 results
Those that know me, know this has been a long time coming. Hope this is a helpful little nugget I wrote up. This is just some stuff I like and what I use. Having used just about every part and part combo this is what works for me. I have reasons for each part. I get alot of questions and i hope this finds some well. As always YMMV. @PatriotDefense @johnbu 9mm GT Stroked slide Beveled mag well(transition between mag well helps smooth reloads) Tuned 9mm Extractor(typically factory extractor is 38. 9mm needs more tension for reliability) Polished and Lapped rails. Hammer face angled and polish(smoothes recoil and slide movement) Hammer strut hole opened and smoothed( eliminates spring bind and friction. Also a must for única hammer ( Slide faced and comp(if needed) retimed. Breach Face inner edge chamfer and polish (smooth feeding) Extractor Channel polish( crud gets built up here. This ensures free movement ) Fireing Pin channel polish.(reliable strikes) Slide bottom front Chamfer(reduce's drag on 2nd round and reliable feeding) Slide rear bottom Chamfer(smooths recoil as slide travels over hammer) FPB removal( not needed in open. Reduces FP drag) All before adding parts. My favorite parts list and combos V12 barrel EGD Brass grips(bring weight back into hands) DAA adjustable thumrest, hand checkered by me Henning Mag well Gen 1( design keeps magwell from walking forward) Over sized Safeties, hand checkerd by me( more dexterity) Henning short Trigger(medium spring) PD Light Guide Rod PD Fireing pin(heavy for reliability) Única DA/SA heavy hammer(used as SA only) #patriotdefense bolo disconnector( eliminates pre travel) EGW sear (gives shortest reset) 6-9lb recoil spring (I prefer 8lb) PD 13lb hammer spring( works with heavy hammer and pd parts) PD reduced Power FP spring Xtra power Extractor spring 9mm Extractor PD reduced Sear spring Precision made sear cage pin made by me( eliminates sear cage + sear wobble, and a crisper disengagement on trigger press) Factory polished sear cage( less friction on moving sear) Xtreme G2 racker or Angled G1 racker. Xtreme trigger plunger Factory trigger bar (almost need to own several to pick best one) Over sized mag release(factory) IPSC Alex RTS2 mount 8 MOA RTS2 or 8 MOA slide ride Única Hammer short strut. #dgbullets 115g bullets HS6 or AA7 powder Current Slide/Frame combo Older Limited frame with better checkering and up swept beaver tail GT slide V12 9mm stroked. Also Tanfoglio 40s&w slides will and can to be tuned to run 9mm reliably with a 9mm barrel obviously. The Spare GT barrel that comes with the gun, can also be used with limited slide in conjuction with cone comp. This is basically what you have to do to the GTs and this is thee best parts and parts combos I've used and found. Enjoy.
Hi there all, I'm still new to the forum, so I apologize if I inadvertently posted this in the wrong place. I have been a long time Glock shooter for defensive use, and have been using several in limited division USPSA for the past few months. While I love the Glock platform, I've been experimenting with other options lately, and after wandering about a bit, seeing where I want to be in this game, I think I'm going to transition over to a CZ Shadow 2, and shoot production division. I recently purchased an STI Apeiro .40 without shooting one, for use in limited, and found that while the gun functions well, I don't like the recoil profile, the overall feel, and a few other things, so i will be letting that go. In the interest of avoiding a similar scenario, i was curious if the people that had shot the Shadow 2 had any observations worth considering before I purchase one ? Any comment on the platform is appreciated, maintenance issues, odd recoil characteristics, parts that tend to break, safeties that kick on unintentionally, sights that fall out of dovetails, parts that tend to need to be replaced early (like extractors in an STI), triggers that don't reset correctly, irregular trigger pulls, anything that annoys or vexes you. I appreciate your time guys, thanks !