Captdave221

Got one thanks.

Is there a reason they are made of brass? I've already lost one I dropped on the floor. I'd like to put a magnet on my InLine Fab mount plate and use steel for the pins so I have a fairly secure storage place when I remove them to check powder or COAL. I have a lathe and some bar stock and will duplicate the dimensions of the Dillon brass pins. Thanks fo any input, Dave

No out of stock at Cajun Gunworks. Out of stock every where I have searched.

I need a mainspring plug for my TS2. The original went flying into the nether world when I lost control of it changing the spring. I ordered two from CZ-Parts and after waiting a month and a half they finally arrived. The bad news..... both have the lanyard on the bottom so the fitment of a magwell is impossible. Anyone want to trade?? This is full size not a compact frame. CZ75 part will work even if you have one with the pin on the bottom I cam grind that off.

I drilled and tapped my TS2 frame to mount a red dot on it. I'm pretty pleased how it turned out and use. I have to blacken the thumb rest mount (bought from DAA) since I had to remove some metal to be able to remove the slide stop for field stripping.

Thanks Mo for the info

I want to install the side mount red dot for the TSO on my TS2. I can do the drilling and tapping. The part is made by CZCUSTOM and comes with the thumb rest. The frame on the TS2 does not have the milled recess for this mount like the TSO. So the red dot will not be exactly centered over the slide/bore and will be slightly to the left. I am going to use a Vortex Venom and the specs say it has 100 MOA windage adjustment. So am I good with this plan? Thanks for you opinions.