Jump to content
Brian Enos's Forums... Maku mozo!

Nick S

  • Content Count

  • Joined

  • Last visited

Everything posted by Nick S

  1. Send your Gen 2 grip to Extreme Shooters. https://www.extremeshooters.com/index.php?route=product/product&product_id=53 Good luck.
  2. I put a BCM hand guard on mine. The barrel nut will fit over the pinned comp. Works great and really changed how the guns handles.
  3. It’s the same one as the RMR. yiu may need different screws.
  4. 11.5 or 12.5 if not suppressed.
  5. There is plenty of room underneath a Mk8 and a SLR set screw ADJGB. The clamp on version should fit but I don't have first hand experience. The Mk4 and Mk8 have the same ID. Good luck.
  6. care to reference where you're seeing this? I hope its true.
  7. I have a SMOS 12.5 Mid barrel. It runs 55 Fiocchis fine both suppressed and unsuppressed. I have a SF MB on it. Obnoxious if you're next to it but very flat shooting. Ive taken it out to 400 yds with no problems. I was skeptical at first as well. Good luck.
  8. Thats good news. I hope it's accurate.
  9. It's not the same. The SSA-MPX should drop "in the new future."
  10. My GMR13 runs Freedom Munitions 147s great as it came from the factory. SCS. It's the softest shooting load I have found. No reliability problems.
  11. My M2 did the same thing. I could induce it by pulling the bolt to the rear an delaying returning forward slightly thus activating the lifter. Bolt would lock to rear. Initially it did not do it under livef ire then suddenly the bolt began to lock back after firing several rounds. A very knowledgable Benelli forum member advised to change out the carrier spring. It fixed the issue. Good luck.
  12. Try replacing the carrier spring.
  13. You need the proprietary barrel wrench to get the nut off.
  14. For the JP MK III Rapid Configuration Handguard you will need their proprietary wrench. I dont think a Magpul wrench will work. There are set screws that keep the tube from spinning so its easy to index/re-index.
  15. You'll need their barrel wrench. They don't supply it with factory built rifles. I called and they sent me one. You'll also need a torch to heat the nut a little. I replaced mine with a KMR as well. The KMR barrel nut fits over a pinned MB. For reference a Noveske NSR nut will not. If they won't send yiu one let me know and I'll loan you mine. Ns
  16. I would check with Strong Side or Stretch to see if they changed the size of the gas port. If I remember correctly at one point they were using a smaller port that in combination with the intermediate gas system would give reliable function with soft shooting. If they opened up the port size then that may be contributing to the problem and an adjustable block would help. Im using a SLR 7 clamp on adjustable block, JP LMOS, TTI buffer spring and Vltor carbine buffer (2.95 oz) and TTI comp. Works great. In regards to hand guards, like Tigereye Im using an ALG rail and there is plenty of room. I have tried Noveske NSR and BCM KMR rails and while some people have had luck in terms of clearance its too close for my comfort. On a different rifle I have a SLR clamp on and a SLR ION 15" Ultra Lite Keymod Handguard. Plenty of room with this setup as well. Good luck.
  17. My 14.5 GMR13 shoots super soft with Freedom 147s. Very reliable. Ive shot it side by side to a friends MPX shooting factory Fiocchi 124s. Not much difference in recoil. Its a none issue in my opinion. Both are super fun guns. For PCC i'd rock a GMR. For range plinking cool factor the MPX. Get both!
  18. Im using Freedom Munitions 147 gr RN in my 14.5" GMR13. I have not chrono'ed it yet. Very soft shooting, relaible and accurate. 25 yd zero drops 8" at 100 yds.
  19. I just spoke with a gentleman who is involved with the match. I did not catch his name however I contacted him via the number on the match FB patch. He said he will be contacting people next week for payment and also releasing some other info. Thats all I got. Good luck.
  20. comms off to a great start this year again...
  21. did they say what days? Sat and Sun or Fri and Saturday? Thanks
  22. I'm shooting a SDC 2011 with a CK Arms metal frame. Do you think this will work? Thanks Nick
  • Create New...