Jump to content
Brian Enos's Forums... Maku mozo!

HANDGUNNER

Classified
  • Posts

    62
  • Joined

  • Last visited

Everything posted by HANDGUNNER

  1. No there is no extra slide travle on the 34 vrs 17,what I ment was the travle of the longer slide. And yes tank we promote it on the 17/22 size pistols,I am a big promoter of portted barrels on the 34/35 size pistols,we have built a lot of them that way.
  2. We have built several 34 open guns with comps,I dont promote building that setup,they are a pain in the ass to get working trouble free. I dont think its a slide weight issue,we have lightened the slides and that dosent help to much,I think it has more to do with the total travle that the slide makes.
  3. We have built a lot of Glock open 9 guns and have used several manufactures barrels, my choice are KKM and briley. We have used some storm lake barrels but not for major 9 setup, there specs vary from barrel to barrel. As far as using factory glock slides for open,there are no problems.
  4. I am not waiting any more on extra capacity 9/38 mags for the caspian hi-cap frames, We are starting to make our own extended base pads. Caspian is missing the boat on a few things.
  5. Flex,we tried the the taylor 140mm on the new style mag tubes and with our new follower mods we got 20rds but it was a little tight but usable, With the stock #6 follower it would only go 19rds. We also came up with a 40 170mm setup that held 24rds.
  6. Like I metioned in a nother post we have been doing R&D on mags & followers and we came up with a set up that will make you open shooters VERY HAPPY. A workable (we tested over 600rds with no malfunctions) a 30rd 170mm stick (30+1 starting mag)Its a little tight but works,we are still doing some testing.
  7. We have been doing some more R&D on the new Glock mags & followers,we have modified the old style +1 followers to work in the new style mag tubes and have had very good results so far.
  8. You can use the chip shooting star 10rd 38 super mags,I have used them for several years,some will work right out of the bag others need a little tuning to work.
  9. We have built several steel guns with our Alum comps and they have held up very well, Everyone is on the Ti kick (Ti Comps hold up better on Major PF Ammo) but if your going to be shooting just light steel loads a Alum comp will holdup. We use Air craft billet Alum and Hardcoat Anodizing. As far as frame mounted optics if the ejection port is lowered and the pistol set up is correct you should have no problems.We have use the low carver mounts with great results.
  10. HANDGUNNER

    Slide Racker

    We can install a sidewinder style slide racker on your slide also,here's a pic of one installed.
  11. HANDGUNNER

    Slide Racker

    We dont have them listed on the website yet (was waiting to get the new on line store up & running)but we and Bobby Carver have them,they are alum and come in black & silver.They fit the factory rear sight dovetail and have a set screw.Price is 30.00
  12. We have built 3 Different R&D XD Open guns, A 4in 9mm with a frame mounted optic (modified caver mount) and our R&D Comp, A 4in 9mm with a docter & Comp,and a 5in 40 with docter & 7 port EDM ported barrel. We have got the mags up to 20+1 in 9mm and 15 +1 in 40 capactity.
  13. Yes they do,I have a S/V with one and my son has a Caspian.
  14. We have converted several 2 pin frames to 3 pin frame set up,saves a few bucks over buying a new frame.
  15. We have started installing a solid pin to replace the weak roll pin on our trigger jobs and this has worked out very well.
  16. There's a picture on the main page of our new website www.novakshandgunneroutlet.com (which is still being debuged)
  17. Our S/S Glock magwell weights 6.5-6.6oz and our Alum one weights 2.3oz
  18. Just wanting to let you glock shooters that had called & emailed me know that we have S/S magwells in stock again
  19. We have built a few 19/23 open guns,they are cool but not for people with larger hands.on the one 19 we did the customer used a grip ext on the mags and that helped alot.We are building a 23 open pistol right now with a 357 sig barrel and our 2 port comp,cant wait to try it out.
  20. I have a update on our magwells,Our 2nd design magwell will work with the dawson,grams,arredondo,taylor base pads using the glock FML mags (9&40) or the schere tubes. The first design magwells will work with the taylor base pads using FML glock mags,schere tubes,base pads other than these will requier fitting of the magwell to the frame.NFML 9mm mags will not work with any base pad setup with out fitting,we have not had a chance to test with NFML 40 mags yet.The new 2nd design magwells have metal connecting plugs (S/S have brass connector/Alum have alum connectors)The S/S magwells weight 6.5oz and the alum weight 2.3oz with the new plugs. We have quite a few Alum 1st design magwells in stock and we are having a close out sale on them if interested. We also will have a 21 magwell and IDPA magwell comming out soon.
  21. Here's a update on our new magwells,they are a touch to wide to fit in the IDPA box,would need to remove a few thousands from the sides,If there is enough intrest i will have some made up. also i was informed of a price overcharge so I have adjusted my price also,,Alum wells are now 70.00 and S/S are 135.00
  22. HANDGUNNER

    9x19 major

    We have built several open 34 glocks using the ported barrel setup, we extend the factory slide cut out to 1.950 and use a aftermarket barrel(BarSto,KKM,Briley)and EDM 5 ports into the barrel.this setup works really well.
  23. Sorry Kevin,as of now they are for the small frame glock,magwells for the large frame pistols will be comming soon as also slide rackers for open guns with frame mounted optics.i will look into a black stainless steel magwell also.
  24. I didnt post any prices because i didnt know if i was aloud,but her ya go *Alum magwells $80.00 *S/S magwells $160.00
  25. OK Guys the magwells will be available for sale next week,the Alum magwells will be in black & silver. didnt get a chance to finish building a IDPA box yet but i did get the weights on the wells (Alum=1.7oz & S/S=5.1oz)If your interested in ordering give me a call or email.
×
×
  • Create New...