-
Posts
236 -
Joined
-
Last visited
Content Type
Forums
Profiles
Events
Store
Posts posted by MadBomber
-
-
A lot of this depends on what you drive to the range. I use a large expanded metal cart with pneumatic tires. It's heavy duty. But, there are two range bags and a cooler. Sometimes three range bags.
-
I turn mine off before holstering.
-
Check the classified adds here in the forum. Or place a want ad here in the forum. You will find lots of choices.
-
If my budget were 4 grand, I would go the custom route. You'll get much better quality.
-
I've rolled thousands of nickel 40 on my case pro in the past 20 years. Never had a single issue.
-
This is like a blast from the past. Now I'm going to have to dig out his DVD and watch it again. Haven't watched it in over a dozen years!
-
Sounds to me like old, worn out brass. But, more info is needed. What powder was he using? Did he have enough crimp? Fast burning powders can have a higher pressure spike.
-
One time, many years, I got to the starting box and realized I didn't have enough mags. The RO, who was a friend and running the same mags. I reached out and snatched two of his and said, ok, I'm good. Ran the stage with no issues. We all got a pretty good laugh out of it.
-
There should be enough. Several years ago, there was a trend with the super short open guns. A lot of them only had like 3 inch barrels or so.
-
Everyone should own at least one 1911. Maybe even several.
-
The new Magnum PI carries one, John Wick uses one, so now all the tactical Timmy's want one. Go figure.
-
Sounds to me like you are doing more than most us! Keep doing what you are doing.
-
If you really want to add insult to injury.
-
AFTEC extractors are all I use in my 1911's.
-
I would agree with Sarge.
-
I used a Safariland 011 and a CR Speed. The Safariland 014 should work just fine.
-
Some people do this if they are sharing a gun for a match.
-
If I could only shoot revo, I would quit and start shooting PRC. Maybe even silhouette with my TC Contender.
-
Ammo doesn't have to look "pretty". As long as runs 100 percent, that's all that matters.
-
Channel 41, Turbo.
-
Serius/XM Octane on the way to the range.
-
I shot one( or half) of a match with the front sight on. After the second stage, I took a knife and cut the fiber optic out. As soon as I got home, out came the hammer and punch. Bye bye front post!
-
Far out! Now you can run your blaster without that glowing green thing confusing your dot.
-
What's the purpose of using a roll crimp on a .40? Most people only use that crimp on revolvers. I believe you should be using a taper crimp.
Need help knocking burrs off outside of 9mm cases during resizing
in 9mm/38 Caliber
Posted
Sounds like you don't have enough crimp. Brass indenting the bullet shouldn't have much effect in the practical shooting world.