[Sierra 22 cal .224 dia 55 gr hp load data]

I picked up a new unopened box of Sierra 22 cal .224 dia 55 gr. hp boat tail for 2 bucks at a garage sale. I can't seem to find any load data using CFE 223 powder on line or in any of my three reloading manuals. Does anyone have a load for how much powder and OAL. I am shooting a Remmington 700 with a heavy barrel.

Thanks 

[Vortex spotting scope]

I have a chance to buy a new Vortex Razor HD 20x60x85 angled spotting scope. My concern is always counterfeit so has anyone ever heard of any stories relating to this. Here are a few pics of the scope and packaging.

[223 shoulder measurement]

Does anyone here loading 223 or 556 casings use the hornady head space comparator and if so are you using the A 330 insert and if so what measurement are you getting when you measure new brass and fired brass. The book says the measurement should be 
1.557 and yet when i measure even brand new brass i get 1.457

[Everglades version 2 bullets]

 I just picked up a 500 round bag of everglades 62 gr 223 bullets version 2.

i have cfe 223 and varget powders looking for load data and oal for these bullets I would greatly appreciate anyone sharing any info on these bullets

[Slide stop]

Thanks do you think it helped to control the recoil. Would you recommend it

[Slide stop]

How much fitting was involved 

[Slide stop]

I am setting up my STI 2011 edge to shoot the new limited optics and I was thinking about adding a slide stop brake pedal. Does anyone have any references and reviews on any slide lock brake pedals

[Plated crimping]

I am shooting a STI edge. All of my mags are old STI mags gen 1 and I have been thinking about changing those out. Thanks for both of you replying. A lot has changed with shooting and now I see a new organization has formed what is it called PCSL. 

[Plated crimping]

Wow I thought for sure someone would know something about seating and crimping plated bullets on this page

[Plated crimping]

So I picked up a box of X-treme 

9mm 147gr HP. First time trying plated bullets

so using a separate die to seat and a separate die to taper crimp what do I have to do differently than using a jacketed hollow point bullet.

 

also I will be using VV N320 powder so any load recipes would help

oal

gr

[X-Treme 147 gr 9mm hp]

Is anyone using X-Treme 9mm 147 gr HP

if so how do you like them and what recipe using N 320 powder

[need advice on mag springs]

So I am switching to Limited optics, I have an STI edge that I have hardly used.  I put on the new holosun comp red dot. I have the gen one STI mags and I put on new TTI base pads springs followers and spacers and they work like crap. So what springs and followers work good for replacements in the gen one mag bodies. 

[Zero 40 cal]

does Montana gold ever have any bulletss in stock or do the sell them from other vendors

[Zero 40 cal]

I have always used zero brand 180 grain jacketed hollow point bullets but the price for 1000 is up to $171. Anybody have any other jacketed hollow point bullets they can recommend. 180 grains

[primers]

I have never seen these primers before and want to know if they are any good

[Buzzers]

Does the Dillon warranty cover the alarm buzzers for the low primer warning and the powder check buzzers 

[Used 650]

The gentleman passed away last year and his son had no interest in it he said he is moving to Seattle and he just wants it gone

[Used 650]

No it was all good right place at the right time

[Used 650]

I saw it on a local add turned out to be 16000 primers I could not resist

[Used 650]

wow that a lot of equipment I can buy a 650 now with a case feeder and two tool heads with powder measures and dies plus around 9000 small and large pistol primers plus some powder and bullet tips plus a bunch of other mis parts  all for 900 bucks. Don't know if I should buy it

[Used 650]

Chucks if you don’t mind me asking what did you sell and for how much

[Used 650]

Is there a market for selling a used XL 650 anymore with a case feed and a bunch of extras or is reloading not popular anymore 

[case feeder for a 650]

So I saw an add for a dillon 650 with a case feeder and what I don't know is the case feeder caliber specific. I know you install different plates for the different caliber but if I want to reload say 9mm and 45 ACOP do I have to buy another entire case feeder for 355 bucks or do they make some kind of conversion to just use the same case feeder

[Montana Gold]

Anyone have any load data for a Montana Gold 125 gr JHP using VV N320 powder?

[507 comp]

So I will be getting my Holosun 507 COMP in a week and I will be throwing it on a STI edge. are there any problems or disadvantages with throwing it on a EGW adapter plate or is it better to cut the slide.