Jump to content
Brian Enos's Forums... Maku mozo!

a_whole_lot_of_freedom

Classified
  • Content Count

    66
  • Joined

  • Last visited

About a_whole_lot_of_freedom

  • Rank
    Finally read the FAQs
  • Birthday 08/28/1996

Profile Information

  • Gender
    Male
  • Location
    Sunset. SC
  • Interests
    Usual gun things
  • Real Name
    Tristan Oglesby

Recent Profile Visitors

272 profile views
  1. I definitely agree it is a bit much which is why I switched to a Q5 SF. I put lok brass grips on it which brought the bulk of the weight back into my hands and make it easy to control. Sent from my SM-G973U using Tapatalk
  2. I was referring to the guide rod Sent from my SM-G973U using Tapatalk
  3. It definitely can be done with not very much work. Tungsten is insanely hard stuff so unless you are a machinist you probably won't be to trim it. If you think it will help you with transition speed then by all means go for it. Sent from my SM-G973U using Tapatalk
  4. I let a friend of mine run mine at a USPSA match last night with full power factor loads and the muzzle rise is basically non-existent. PMM definitely came up with a top notch idea. Sent from my SM-G973U using Tapatalk
  5. Sweet rig. I went with a Mac Defense custom slide and stipple for mine. With an Agency Arms trigger Sent from my SM-G973U using Tapatalk
  6. Same. This is probably the best combination outside of getting a professional trigger job. Sent from my SM-G973U using Tapatalk
  7. I believe it's the opposite Sent from my SM-G973U using Tapatalk
  8. Make sure that the guide rod isn't off center where it makes contact with the barrel. If it is even the slightest bit off it will do that. Sent from my SM-G973U using Tapatalk
  9. Tungsten guide rod, extended mag release, and grey guns competition trigger kit are the mods I ran but on the legion you can definitely run it straight stock and not see a significant performance loss. Sent from my SM-G973U using Tapatalk
  10. I had the same concern originally. The springs are very flexible you won't hurt them. Sent from my SM-G973U using Tapatalk
  11. Push this sliver plunger down and it will slide forward. You will have to pull pretty hard so don't feel like you are gonna break it Sent from my SM-G973U using Tapatalk
  12. I would guess the feelings difference is because of the piece on the trigger bar that depressed the Striker Safety is contacting before it did on the overwatch trigger giving to the feelings of mechanical resistance (sliding) as opposed to only the springs on the Overwatch trigger. Overwatch trigger bar would likely contact the seir engagement before it started depressing the safety but the other ones do the opposite. Sent from my SM-G973U using Tapatalk
  13. I was able to do it with the factory trigger bar and it worked great (Launched a pencil across the room) Unfortunately it took me drilling out the pin of the OEM trigger shoe. (Punch wouldn't do it) I am not familiar with the Apex nor do I have it to play around with or I would see what I could come up with. I tried to attached some videos you can download for your enjoyment. Hopefully they work properly. http://cloud.tapatalk.com/s/5efc9bb7831f7/Snapchat-522907374.mp4http://cloud.tapatalk.com/s/5efc9ba37d6cc/Snapchat-1116041744.mp4 Sent from my SM-G973U using Tapatalk
  14. So it sounds like the solution to getting the striker to hit full power with minimal over travel is to swap out the OW trigger bar with either the OEM or Apex trigger bar. In order to get the mm or 2 that was removed from the engagement surface by overwatch. Sent from my SM-G973U using Tapatalk
  15. Earl's repair shop posted these up not very long ago if anyone was wondering. At 145 its a bit cheaper than the overwatch trigger. http://www.carlwalther.com/q5.htm Sent from my SM-G973U using Tapatalk
×
×
  • Create New...