Jump to content
Brian Enos's Forums... Maku mozo!

MgtMike

Members
  • Posts

    18
  • Joined

  • Last visited

Everything posted by MgtMike

  1. So I had my first match yesterday with my SRO mounted on my shadow 2 orange with CZC rds plate cut. After the match I noticed the left screw was gone (ordered the screws from big Tex). I had ordered some extra screws. Tried putting another on the missing side and noticed the screw is too short to grab onto any threads. The right side manages to grab and tighten down. Am I supposed to use a longer screw on the left side? May cut a long screw down that came with the SRO.
  2. FYI in case anyone is debating sending in a slide to CZC. I sent my S2 Orange to CZ Custom for the RDS cut on January 2nd. It shipped back to me yesterday and I should get it tomorrow.
  3. I was in the same boat as you. I bought a shadow 2 Orange also right before the new year. I didn’t hesitate and sent the slide to CZC for the plate. Can’t wait for it to get back so I can enjoy the pistol (haven’t even shot it since I sent the slide a few days after I brought it home). Sucks having the frame in the safe without a slide haha. Definitely got over the whole slide cut thing once I got the email from CZC saying they received it. In the end, it’s just a pistol. Enjoy it and don’t think about resale. More than likely someone buying it will be shooting competition as well if you do sell and wouldn’t mind having the slide already milled. I’m making the switch from limited to CO as soon as it gets back.
  4. Nice! Yeah I have to get my Dillon 750 set up for 9mm loads. I’ve only shot limited major (40sw) since I got it a year ago. S2O should be here Wednesday.
  5. Nice! I have a S2 Orange coming in that I’m setting up for CO and think I’m going with Primary Machine for the same cuts. I’m glad the turnaround isn’t as long as it says on the site. Probably going to run a SRO on mine but side note, I purchased a Holosun 507K for my P365XL last week and love the reticle also. Still have to go sight it in, but in dry fire I’m able to pick up the reticle pretty easily. That’s my first red dot on a pistol but I think I’m going to love getting into CO from Limited. Makes me with I’d gone to CO when I made the switch from Production to Limited. Can you add a pic or two from the top view?
  6. I’m in the market for a CO pistol and debating the S2 CO or the S2 Accu CO. 100% going to be used for USPSA CO so not sure if the accu is worth the price increase for the sport. Planning on running a SRO and hoping to make a purchase by the end of the month. I’ve also thought about the S2 orange since I have a TSO I shoot in limited, but don’t want to get that and have to cut the slide for an optic on top of the price.
  7. Thanks for the help. Those are the exact ones I run on 2 out of my 4 mags (2 are stock 17rd mags). Need to get 2 more CZ Custom base pad extensions for the other two but they haven’t been in stock. Hopefully they come back in stock sometime this month.
  8. Shot this at the last match. Best classifier score for me so far. B class shooter. limited major with a TSO 3.23sec A-4 C-2 8.66HF
  9. Quick question - which grams spring/follower kit do I need for my TSO .40 running the 140mm CZ custom base pad? I have two of these setups and two stock magazines that I want to get base pad spring combos for, but forgot if it’s the 11 or 13 spring grams kit I had ordered last year. Have had my TSO for a little over a year. No issues at all except for a couple of feed issues with my recent reloads due to COAL and loading mags to 21. Just got a Dillon 750 not long ago and have been loading my rounds with 4.3gr Titegroup, bbi 180gr bullets, federal brass and CCI primers. 1.125 COAL. Taking a class with JJ Racaza at the end of September and want to get a few more mag setups In before the class. I’d like to get a CZ custom large magwell in before the class also but they’ve been out of stock for a while.
  10. I own a TSO .40 that I shoot in USPSA Limited. Just ordered my Dillon 750 and hoping to get into reloading soon. Is there a list of everyone’s preferred ammo formula for the TSO I can see? Also, I am going to order a Hundo case gauge and since I plan on using coated bullets, will I need to order the XL?
  11. Anyone know where I could find a CZ custom large magwell besides CZC which is out of stock? I was going to have my magwell/frame blended, but wanted to move up to the larger magwell before any filing hoping for a better fit before blending.
  12. MgtMike

    CZ TSO holster

    I run a RHT holster for mine. Debated between running a race Guga Riba holster or the RHT. Ultimately, I figured the possible time difference between running a kydex vs race holster were very minimal and there are TONS of other ways I can shave time off my runs until I’m at least a M or GM. I decided to start off with the RHT. Took me right about a month to get it, but I love it so far.
  13. MgtMike

    Should I clean my TSO?

    ^ I agree with the post above. It doesn’t hurt to give it a clean. I clean after every range session or match. Do I have to? No, but I like spending time cleaning my pistols. It doesn’t take an hour to do so.
  14. I shot a match this past Sunday. Of course the first stage our squad gets on us the classifier (currently Limited unclassified) and this was my 3rd classifier on my way to initial classification. Random draw, and yup, I’m the first shooter. Classifier 09-02, Virginia count, 4 targets covered with no shoots. Turned and shot the stage left to right. 2 alphas, 2 alphas, alpha mike, alpha mike no shoot for trying to speed up the during the last two targets. Definitely not the way I wanted to start the day. Rest of the day, I had a few no shoots on some distance shots that were about 1/2” on the white, along with a couple more mikes for splitting the wood around the window on my final target. In the end, my speed and movement was pretty good, but those mikes and no shoots killed my overall score. Learn something new every match and I know what I have to work on before my next match.
  15. Just shot this at our last match this past weekend. I shoot limited major (unclassified) and this was my 2nd classifier since moving to Limited. Wasn’t sure how to attack this classifier but it worked out ok. I had A:17 C:5 D:1 M:1 and shot a B percentage. That mike kept me from an A run. CZ TSO .40sw String 1 https://youtu.be/UjMfJbRQOJM Second string https://youtu.be/pP1Xfnse1yU
  16. I was thinking the medium length were needed for the cz custom magwell for the TSO based on the site. Is that just for the cz custom grips and LOK TSO grips work fine without being too short?
  17. Im wanting to order some LOK grips and plan on upgrading to the CZC magwell for my TSO. What length grips would I need to fit the CZC magwell?
  18. I’m going to be shooting my TSO .40 at the end of the month in my first uspsa level 2 match. I’ve only shot it at a local match, where it ate up the rubber recoil bushing within 200 rounds, and a second range day. Will removing the rubber bushing make a big difference? I don’t want to have one break apart on me during the match and cause a malfunction. I’ve run a couple hundred rounds of the federal syntech 165gr rounds also and liked how they ran, but want to get a few hundred 205gr rounds since it seems that’s what most people use for competition. Can’t wait to run it at the match.
×
×
  • Create New...