AK86

I was hoping for a reduced power option as well. My 48 won't run on my 125gr blues over 3.8gr TG load that runs perfect in my G43, shadow 2, and sp01. Stove pipes intermittently and always fails to lock open on empty. I bought the "reduced" ismi 15lb rod from stoeger proshop and its way stiffer than stock. It must be a cut down flatwire as its too short to be a compact spring. I'm gonna try an 11lb and cut it the same length but I'm not super optimistic. I'll probably bail on the idea rather than shell out for the glockstore reduced tungsten rod or the dpm kit as it runs fine on factory ammo.

I had my 48 slide done by them last December for a 507k. I skipped cerakote since they couldn't just do the cut. They quoted 3-4wk with cerakote. They had it in house 2 days. Immaculate machine work.

I checked my notes DA is actually 6.8lb. Polishing all the internals makes a noticeable difference as well. DA pull is so smooth its like it's riding on bearings. The only thing I didn't like about the 11.5 hammer spring is it made the SA pull mushy compared to even the 13lb. Probably going to drop in a CGW comp hammer down the road. I also have a fully cajunized SP01 with a 13lb hammer spring and the DA is siginificantly heavier but the SA is lower and more crisp even with the firing pin block. I need to put that one on a trigger scale. I just ordered an 11.5lb hammer spring for it to try for it as well.

My S2 has an 11.5 main spring, 11lb recoil spring, and a rami firing pin spring. All other parts are stock. I am lighting off CCI's with no issues. I believe the extended firing pin is optional. DA pull is 6.5lb, SA 2.75lb.