Jump to content
Brian Enos's Forums... Maku mozo!

Rfbosse

Members
  • Posts

    7
  • Joined

  • Last visited

Recent Profile Visitors

The recent visitors block is disabled and is not being shown to other users.

Rfbosse's Achievements

Looks for Range

Looks for Range (1/11)

  1. Mlmiller1, I haven't noticed and roughness in the chamber or barrel. Ray
  2. I got a Mr bulletfeeder expander to try to see if would help. Does anyone know why the 40 Cal expander is so much longer than the Dillon or the 9mm expander? Ray
  3. I was able to run 40 rounds of the blue bullets yesterday without noticeable leading yesterday using non push though sized cases. I put an additional 60 Brazos and had noticeable leading. I guess I will keep experimenting, I still have roughly 1500 of the brazos to use up. Ray
  4. It a glock barrel so it is polygonal, .4021 and .3965 are the measurements of the slug I did in the barrel. The blue bullets are measuring .4006 and the bazos is .4012 I have loaded some test rounds that have not been through the redding grx sizer and will test them tomorrow. Ray
  5. Dutchman, Yes, I spent a hour scrubbing the lead out and could not see any residue left in the bore. I will try loading some test round that have not been run through the redding push through. Thanks, Ray
  6. I have backed off the crimp until to where it is barely straightening the flair back out.
  7. Guys, I have been trying to load coated 180 grain bullets with sport pistol for a glock 22 gen 4 and have been having major problems with leading. Tried Brazos and Blue bullets and both are leading with a mild load of sport pistol and power pistol. Checked and am not scrapping the coating off while seating, not crimping through it either. Loading with a dillon 650 with dillon dies, brass is mix range brass that has been tumbled cleaned and then run through a grx push through sizer prior to running through the dillon. Got any suggestions? Thanks, Ray
×
×
  • Create New...