bimmer1980

I think there is more to it than just the times. Comfort. Hits. Hits and times with a bad grip (how easy to shoot). How easy to get a good grip. Return to zero. etc.

Maybe there´s something wrong with the trigger. Also double check the sear and the nose on the striker. They must be clean too. I used this video. If you still aren´t sure that it runs like it should, i would check the pins first. If that wasn´t the problem, dissasemble and reassamble again.

You don´t need grease in the fcu. You can use a bit to hold the sear springs in place when you assemble tho. You can use some oil on the moving parts.

I heard they are not approved for .40 for a reason.

Nice ! I sometimes try that in dryfire speedmode too (with coolfire). Even then it´s pretty hard to land at, or even beat 2.00. Even without going hard for 4 Alphas. Have to try it in live fire someday, but i couldn´t shoot since march due to corona.

Yeah try it. As i said, i´m not sure anymore. I tried almost all configurations (Apex & GG with different triggers, also the AC) and some didn´t work. Often it´s a problem with the overtavel sleeve but you won´t need that with the AC.

I think pretty close to yours. ~ 75 for Level 2 ~ 110 for Level 3 Don´t know for the even bigger matches.

I´m really happy shooting IPSC reading this stuff… No pasting, no scoring, no ROing. Just shoot.

I´m not 100% sure if it worked with the Apex bar. I think it didn´t. But if it does, there´s almost no difference in pull weight.

I´m using it, and i love it. Couldn´t shoot since march due to corona. All i could do, was dryfiring with coolfire. I had 2 livefire trainings in this time period and there was no weird feeling, as there normally would be when you can´t shoot for 5 Month. It felt like i never stopped, i even became better.

I think the DDA dryfire Mags will produce much less damage.

At first a few days only. After my eyes had a laser-operation, it took me about 3 month to stop seeing strange sightpictures in recoil, with both eyes open. My eyes somehow switched to left eye dominance in recoil.

Love this s#!t! I would be afraid to shoot my support hand´s thumb, as it´s longer than the gun

i saw cheap p320 grips for stippling and epoxy jobs at smallgunparts.com , i think. They where unbelievable cheap. Found it: https://www.smallgunparts.com/Sig-P320-Full-Grip-Mod-No-Mag-Release 9,99 edit: well, out of stock...

It really is !

Yes i know. It was about how to stay above 3lbs (1,36KG) for IPSC.

I know now. I use the complete GG Kit, with the stock trigger return spring. It´s about 1,5 KG in the middle of the trigger, 1,1 -1,2 KG if you pull on the bottom end. IPSC rule sais, must me messured in the middle of the trigger. So i should be pretty safe.

Mine reduced the weight a good bit over the stock springs. (Apex only Triggerkit) I think they are about the same like in the GG Kit.

And 99% can be worse than 50% it depends on the winner´s skill level.

I think nobody can know that, as the gun issn´t produced yet

If you don´t know him. Watch Nils Jonasson shoot.

One of mine where broken within 2 Weeks. No big deal as i noticed it only because i did put a GG Kit in. Just recently this safety lever on the striker did break after a lot of coolfire training. Thats strange in my eyes.

Thats right. For cleaning you don´t need to do that. In my case i had to play a lot with the sear and trigger return springs to don´t get under 3lb (IPSC). Still have to be aware of that as the springs wear out and the trigger breaks in. It´s a pain in the A** to readjust and locktide the trigger every time.

I switched from a hybrid Apex/GG to fully GG. Overtravel is short enough, pretravel doesn´t really matter. The Apex had a shorter reset, which was nice, but somehow i can shoot faster splits with the GG Kit. Must be something about how the trigger breaks or the weight of it. I have the Armory Craft Trigger too, but i don´t use it. It´s kind of annoying to set it up, locktide the screws and unscrew them to pick the FCU apart. Plus (i heard ) you can deactivate the drop safety if you use the pretravel screw to much. To me that issn´t worth it. The GG Kit is good enough in my eyes.