JDIllon

Let me show you what the total solution to loading primers into tubes looks like! I have tried them all. Finally gave in after canceling 2 other orders for the Pal filler. I have 1050 and nothing is worse than primers in the wrong direction. A mayor PIA! Photos are to large. 4 days from Italy. Loaded 10 tubes in a few minutes, just through primers in tray couple of little shakes all primers in right direction. Put tube in, hit switch, all primers loaded correct direction!!! Yea!! PAL Filler! The final solution. Just my .04. JD

6 MOA, they are not supposed to be in till March! I'm in no hurry. I will just keep replacing my Sigs till then. Just can't justify stepping up to the SRO or Max. There should be good red dots that last for a reasonable price. Just my .02 JD If I like the first one, I thought I would try a 8 MOA.

I just ordered a Alpha 3!!! Tired of sending the Sigs back!! From all reports I hope this is a good decision. JD

Hi Sarge, pal fill on the way. Thanks

Anyone shooting the Sig Romeo3 XL? and if so do you know the screw pattern? I really like red dots with lg windows. It's an age thing. Thanks, JD

What other mfg mounting holes does the Romeo3 XL match?? I currently have a romeo1 mounted on a CZ SP01. And I have the CZ custom multiple holes mount on it! Thanks, JD

Indoor range brass. OK thanks. JD

I currently run just 9 mm with to different powders and 4different bullets. Have never loaded rifle rnds. Can I do everything on the 1050 with out processing brass separately? Want to load for full auto 223 so no for need exotic loads Just sending lead down range! Any suggestion an additional things I need, plan on setting up a second head. JD

Me 2, I had no luck with the Pro at all. But would like to give this a try. JD

You are evidently reading a different post than I am. I’m 77 years old, and I am trying to reduce my day to day problems, not increase them. Best to you and the 1000s that got the ones that work. JD

After reading this topic and having owned one. The best decision I ever made was sending it back!! I did every one of those solutions at least twice and never could get it to work. They kept saying they have thousands that work fine. From what I can tell no one on this forum got one of the good ones! Just my .02 JD

Any one running the Kynshot 5007? In there PCC and do you know how it compares to the blitz set up. Thanks JD

I have hyperfire 24Cs on 3 PCC and a SW 15/22 work great on al of them. Really light trigger pull. JD

Just a project. For something to do. JD

Thanks!

I thought maybe this may be of interest to some of you that enjoy doing your own thing. I am one of those who had no luck with the Primer Pro. More trouble than it was worth! I tried all of the fixes and none of them worked well enough to keep it around. SO! The JD primer feed system. Total cost about $15.00 As fast as the Primer Pro and for ME much more reliable. I sometimes have 1 or 2 primers out of a 1000 upside down. I normally load 8 tubes at a time and it takes about 15 minutes or less. It is made up of a RCBS primer flipper/Feeder and a little battery powered fan with the blades removed and a couple of spent primers in the fan hub to make it vibrate. WORKS GREAT!!

Same here!! to those of you that have had great luck with it, I'm happy for you. I'm not apposed to doing some adjusting and fiddling. But I spent week and many phone calls and still had nothing but problems. And for DDA to say they won't pay shipping even one way on a product with this many problems is not very good customer service. There answer was we have 1000s out with no problems!! That is great for the people that have one of those!! I have one that has a problem and that is the only one I give a damn about. I really felt that DAA would stand behind this product when I bought it, but that is not the case. Just my .02 JD

As I recall,without the shroud,it is about the same as the C-More. JD

It’s not a big deal to make a pattern from the bottom of the sight. I wanted the blast shield, so I used it. JD

If you want the blocks on the bottom of the 510 to locate it. You would have to machine those slots into the mount. Which you can do if you use the Tevo blast shield for a pattern. JD

I agree, I just ordered one from Range Panda. You find great things on here. JD

You can also use a heavy rubber band the same way. Buy going from the snap clip down under the tool head around the bottom of the depth die. It seems to work well for me. I just never seem to getting the time to rig up the spring set up. JD

For what ever it is worth!! I put in the Springco trigger and safety spring. A 12# Glock recoil spring with the small end opened up to fit the standard guide rod. And have shot minor loads with no problems. (124 gr 3.6 titegroup) The gun shoots great, easy to rack, and light recoil. JD Note: I have done this to several of my friends SFs with the same results.

No not at all. If I can be of help just PM me and I will get you my contact info. JD You can reinstall the C-More with no problem.

I did mine with end mill bit in a drill press! But it would be much better and more precise if done with a mill. I just takes some time to get everything measured up. I have shot 1500 plus rounds and all is good. Love the 510 and the big window. JD