Jump to content
Brian Enos's Forums... Maku mozo!

JDIllon

Classified
  • Posts

    137
  • Joined

  • Last visited

Everything posted by JDIllon

  1. I’ve checked everywhere and I can’t find any dovetail that works. Also I did my own trigger spring work and got the trigger to 2.5 to 3 lbs. And the gun shoots great. Take up and reset are just fine for me. I would do that before doing a trigger job. Just my .02. JD
  2. Once I got the trigger down to around 3# I really like the way the gun shoots. At 35 feet 10 rnds in 2.5in center. JD
  3. The #10683 does not fit? Anyone know what mount works? JD
  4. Anyone using a Dovetail Red Dot mount? And if so which one? Thanks, JD
  5. Any one using the dovetail Red Dot mount? and if so, which one? Thanks,JD
  6. I saw the press for the first time yesterday at a friends house. Very impressive, it’s a lot of press for the money! I wanted to compare it to my 1050. There are many things I liked better, 10 stations, basic design, the way the primer tower assembly can be removed without losing primers, indexing, lights, buttons instead of pins, case feeder design, cost. I only saw it in 9mm operation. Dislikes 180 degrees handle rotation, although it was very easy and was much easier and took less force to operate than my 1050, and it looks like the powder drop is just a flat surface over the top of the case and not s powder funnel? I think the handle problem could be solved for pistol cases by using a shorter handle causing a shorter throw and you don’t need as much force. They have bullet feeder coming, and its going to feed and seat the bullet this would be a big improvement over the AA because it eliminates the bullets moving before being seated. So I came straight home and ordered everything! Two hours later! After having time to think about it! I canceled the order. I really liked everything I saw, but I decided my 1050 plus bullet feeder does everything it does. Conclusion, I will buy one after they have the bullet feeder and have a little more use out in the consumers hands. Just my .02. JD
  7. JDIllon

    Screws Needed

    Mine didn't have any screws to mount the optic? All mine had was T8s and T10s and both of those are to small for the helicoils that are in the plates? DID ANYONE GET THE CORRECT SCREWS TO MOUNT AN OPTIC? Thanks, JD
  8. Have you changed the trigger? I have a GHM9 and shoot it in Action Steel at our local match’s. I put a PSA 3.5 lbs match trigger, it is great. The CMC one piece trigger also works. Contact me if you want more info. JD
  9. Just my .02, I’ve had a 3D bullet case feeder for over 6 years and loaded 1000s of 9mm bullets and it works just fine. JD
  10. KCI makes a 50 rnd glock Drum it workks great and is real easy to load! JD
  11. ? What are you looking for? There are 57 round extensions for Glock mags and they make 50round drums. JD
  12. Has anyone noticed the feel in the recoil of the bump that is on the ramped bolt? This seems to make a noticeable sight bounce. Strange because the gun seems to cycle fine when short stroked. Just curious if anyone else has noticed this . JD Don’t understand why it’s needed? It seems to over set the hammer?
  13. Does anyone who has a ARV know why the bolt has a bump on the ramp? This seams to make a pronounced difference in the feel of the recoil? Also when you rack the gun, you can feel it. I have 2 other PSA PCCs and they are much smoother. JD
  14. NICE to KNOW! I love the Hyperfire! but they are very spendy. I decided to try one of PSAs drop in 3.5 lbs on sale for 99.00. I was going to take a Hyperfire out of one of my other guns and try it? Now! if I am not happy with the PSA, I will swop it out with the PSA. JD
  15. What triggers? I have been running Hyperfire? Tim did you get the Hyperfire to work with BHO? JD
  16. I think it will be fine! If you use the Tac Com barrel with the upper bullet guide? The ARV has it's own guide rams built in and they work great. JD
  17. You have to take off the bolt hold back and the ejector. Then follow the regular directions for use. Once I set it up it goes in fine after that. JD
  18. With all due respect, you asked for input on running the press without the ratchet? And are give us all of your reasons for not doing it. As you have heard, most of us run without the ratchet. That works for us! You should do what ever feels right for you. Quite frankly I have found that solving stoppages is easier without the ratchet. Just my .02. JD
  19. If there’s a problem,the handle nominally stops! Many times you an locate the issue and continue on. You will get the feel of what things go wrong and come up with your own solutions. It’s always the same one or two issues. Try it for a while you can always go back. Just the getting rid of the noise is worth it. JD
  20. I’ve been using Tim’s TacCom and they work great. Just curious if anyone else’s thoughts. Staying with what works. JD
  21. On My 1050 I just removed the the assembly. And use the bar as a spacer. I just lower the head and line up the bolt and bar. JD
  22. It works great! I changed over to get more capacity for my SMG, now I can shoot 50rnd drums in my M 15. JD
×
×
  • Create New...