Jump to content
Brian Enos's Forums... Maku mozo!

vrwm

Members
  • Content Count

    32
  • Joined

  • Last visited

Everything posted by vrwm

  1. vrwm

    Buy Shadow 2 Slide?

    Stuart had a used one when I messaged him for mine. I’d also check out Primary machine. They also sells slides but with their cut.
  2. vrwm

    Sights

    I personally like being able to see the gap more on both sides of the front sight and having them being equal. Some people like the wider sight so they see less gap. It’s personal preference. I feel when shooting doubles or faster under pressure shots being able to tell if the gap is bigger left to right when the sight is returning to position will help with shot calling. Granted your grip is right and the front sight is tracking right back into the sight picture after your shots. I also feel like the thinner front sight at distance helps at further shots. Like a mini popper at 25 yards. Havi
  3. vrwm

    Sights

    Same front sight that I prefer. I use it on both of my shadow 2s. I like have the extra gap in between. I feel like it helps for the longer distance shots and shot calling. YMMV
  4. I just ordered my P10s holster from here. They had the option for my light and pistol combo. https://www.anrdesignkydexholster.com/product-category/all-kydex-builders/ They got a hold of the P10s early and have holster molded already. I’m also currently carrying my P10s in my P10c holster from https://www.tier1concealed.com/ it fits nicely.
  5. I’ve dealt with both places and have had really great experiences with both. You can go wrong either way. Be careful with which safety you pick from Cajun. The one they have listed for the shadow 2 and Tactical sports is the one you already have. I believe you’re looking for this one. https://cajungunworks.com/product/50012-safety-set-shadow-2-extended-left-side/ I believe cz custom is out of stock https://czcustom.com/cz-parts-all/safeties/cz-factory-shadow2-safeties-amb.html I personally use the CZCustom Extended safety. My thumb was still to
  6. vrwm

    Shadow 2 mags

    I get mine from Greg cote. Mecgar 17 round mags are $25 iirc. http://gregcotellc.com/cart/cz-factory-mecgar-actmag-c-173/cz-75b-cz-85b-cz-75-sp01-cz-shadow-2-17-rd-9mm-mgcz7517afc-p-591.html?zenid=rmbsaqk2ktgnnljo5qt0gq9207
  7. Todd, I’m in for 5000 the next available batch Thanks Vincent
  8. Mecgar 17 round with henning pads and henning internals averaged 104-105grams and my CZ factory 17 with factory internals and TTI pads weighed in at 111-112 grams
  9. Did you check your hammer to sear clearance? It is possible that one of the adjustment screws on the trigger backed out if you had them installed and it’s dragging.
  10. I had no issues with CCI mini-mag. I did however have issues with an 11.5 hammer spring. It only set off the ammo in double action only. I had no issues with the factory hammer spring.
  11. vrwm

    CZ Shadow 2

    https://cajungunworks.com/product/1488-t5-shadow-2-disconnector/ mine dropped right in my production gun, my carry optics set up I had to fit a little, but I eventually put an RRK in my carry optics set up.
  12. vrwm

    Optic Ready CZ Shadow 2

    I can’t wait to see all the Optic ready CZs more readily available in the states. Is the weight with or without a magazine? I feel like I had to jump hoops to make 45oz. If I’m not mistaken IPSC doesn’t have weight for their carry optics.
  13. That it awesome. Did you use a factory x5 release? How does it feel compared to the shadow 2? I have a springer extended release on my x5. Reminds me more of the original tso release.
  14. Looks good, nice big window. I would like to see a side by side with a Romeo 1. I wonder how long it will take to actually get to the market.
  15. I didn’t run into any problems with primers until below an 11.5 lbs hammer spring with the stock firing pin and spring. I however ran into problems with mixing a CZ custom extended firing pin with a CGW reduced power spring and vice versa. The firing pin was getting stuck in the hole. Mine actually went full auto until the firing pin block stop fell out and shot the firing pin back. I am running a shadow 2 though so YMMV
  16. vrwm

    CZ Shadow 2

    The disco replacement for me keeps my SA pull more consistent. If you can shoot off the reset or don’t mind pre travel before your pull, you might not need it. For me the biggest difference is that it takes up almost all the pre travel. The trigger is pretty stays at the reset point.
  17. vrwm

    CZ Shadow 2

    I run the same set up but with a t5 disco
  18. From my understanding, only if the window cuts are made to the slide, it won’t be Eligible for production division. There are a few people who make weight without the window cut depending on the starting weight of the pistol, mods(plastic guide rod, light grips) and which optic. It would still be eligible for limited division with the cut and the plate though. Check out this thread
  19. Send @eerw a PM, he occasionally has a slide or he can get one. They’re doing mine upper for CO right now.
  20. @minnesota1 Is your shadow 2 Stock? In regards to your question, when you mean same, do you mean trigger weight or trigger pull distance? If it’s trigger pull weight, I agree with the above and a lightened main spring may be what you’re looking for. I have short fingers and I installed The Reach reduction kit and it pulls the trigger a few millimeter back for the double action. The trigger is permanently more reward in the gun. it also shortens the reset of the single action.
  21. Czcustom sells a plate to drill and tap frame mounted red dots that can be used for thumb rest holes if you’re comfortable doing it yourself.
  22. Oak hill has All of the p10 line up listed with prices on their site. Hopefully they don’t float too far from what the have up. From what I’ve been seeing, CZ USA will be debuting them at shot show. No word on a release.
  23. vrwm

    CZ TSO Holster

    I went with the double alpha x on my tso. There are two different inserts for the tso depending on which trigger guard you get. All the 2018’s I’ve seen so far have came with the Czechmate trigger guard which would be the TS/Czechmate insert.
  24. Great write up! I’m glad to see Shadow 2s run pretty much flawlessly with high counts . How have the slide stops been holding up? Have you had any issues with setting off primers running the 11.5 lbs hammer spring? I’ve been using the 13 lbs hammer spring and have had no problems, but wanted to see if I’d have any reliability issues with the 11.5 lbs. What height Dawson front sight have you been using?
  25. This is what I use when I don’t shoot reloads, shoots pretty soft and has fired every round with 11.5 hammer spring and 11lb recoil spring.
×
×
  • Create New...