pwsmkaz

6.5 Grendel ammo is more available than the ARC. You can make Grendel brass into ARC brass but that's bigger endeavor. Can't got wrong with either. 6.8 is dead

Lone Star Arms MPC or JP. Optic Vortex Razor or Swaro or Kahles

Anything below a 9# without a comp the gun needs to be lubed and cleaned regularly. Also the dirtier the powder and environment are a factor. Atlas Gunworks has a series on checking the extractor tension and ejection diagnosis.

124 RMR JHP's and N320 Or try Blue Bullets 125GN Truncated Both are great.

Get a JP Supermatch. It's hands down the best and their customer service is second to none.

I'd be concerned about the heat on a heavy shotgun stage. They do get hot. I've seen them on Benelli's but never on the Beretta. A port job and hiviz and mine has been great.

There is the option dovetailing flip up rear sight into the rib. Also there the option of the magpul stock conversion. I was able adjust the cheek height with it.

Reach out to Hayes Custom. Aaron knows Bennelli's well and Breda is is 99 percent the same.

Hiperfire Eclipse or Timney Calvin GOAT Followed by the Elf 3g flat

Holosun 407 works great

Hi, I recently acquired an AMMOBOT Rev 3. I'm trying to add a DBOS from Immortobot. My control unit didn't come with the accessory Comm Pigtail Harness. Does anyone know where to find a replacement?

Hi, I recently acquired an AMMOBOT Rev 3. I'm trying to add a DBOS from Immortobot. My control unit didn't come with the accessory Comm Pigtail Harness. Does anyone know where to find a replacement?

+1 for Carbon arm ratchet system. Super easy to get the gear on and off and cinch down.

Radian makes a raptor/talon for the 15/22 so it most clones my competition rifle it's a cheap trainer for burning

Small frame 6.5 grendel large frame 6.5 creedmoor. Suppressor cover I'm a coletac fan especially on a semi auto. Consider barrel life when looking at push out that far these faster calibers do eat throats out faster than a .223 barrel.

I tried a 26 inch V3 and now I have a Beretta 1301 Save your money for something reliable and with aftermarket support. Benelli/Stoeger/Breda/Beretta If you're on a budget there's nothing wrong with Stoeger. If your heart set on a gas gun the Beretta is where it's at just know the loading port needs a lot of work and the early ones the serial # is at the front of the receiver.

Apex improves the lock time that helps the most with the m&p.

I have the gunsmith fit 5" apex barrel it was quiet and improvement over the stock barrel grouping wise. It cost me a lot more to get it fitted locally. I'm not sure there was much advantage over a semi drop in.

It depends on the springs used but it's still not a 1911/2011. I've got it around 3 lbs and it's pretty crisp.

TTI Buy once cry once easy to get on and off at a match good quality springs

Apex does sell the sear separately also you could try finding a pro series sear they're fairly close in my experience. I love the FSS kit and never went back.

Does anyone know if you need a light bearing holster for the night match?

I got a 9mm SVI used that built in 2016 with the signature skate grip AET tin finish barrel sight tracker 5.4 in their pvd finish with stainless controls and 5 tuned sv mags. I wanted the Atlas after handling one at a match before finding SVI. I happened to find this SVI and negotiated a deal I couldn't pass up. First world problems.?

I bought an SVI for a bit less than a new Nemesis that came with 5 mags. I'd end up paying nearly 2 grand more plus waiting a couple of months to buy Atlas with mags. I'd be crazy if I were to unload a SVI for an Atlas.

The AET barrel is known to strip the plating off of plated bullets due to the rifling of the barrel causing accuracy issues. Brandon at SVI recommended using jacketed bullets with it. I've read mixed opinions on coated bullets like Blue bullets and Bayou. The non AET Infinity/Schuemann barrels don't seem to have this issue for what I've read. I just bought it and have a few thousand Berry's and Xtreme bullets already. I ordered RMR and Precision Delta bullets for it but I'm seeing if there are more options since I won't be able to used plated bullets with this gun.