Jump to content
Brian Enos's Forums... Maku mozo!

andrewt556

Classified
  • Posts

    101
  • Joined

  • Last visited

Everything posted by andrewt556

  1. I heard mpx used to break a lot and had to cleaned vigorously
  2. I had a cmc standard trigger and a taccom extreme bolt and that combo made a indentation where the firing pin was housed and i switched back to milsec till I get a proper trigger.
  3. Comp's also make chronoing more difficult.
  4. Glock mags in PCC's tend to work pretty well. I prefer base pads over splices tho.
  5. CMC released a new 9mm trigger I wonder if anyone has gotten one yet.
  6. My gun is too light. HAHA sub 5lb no handguard... should add some weight.
  7. I was just gonna download the reload mag
  8. I know that pocket you are talking about it wasn’t their. It was behind the bolt catch but infront of the hammer in the cocked position. I ended up opening the upper to get that case out. I got the charging handle out I just hit it harder. The roll pin that bolts in the latch walked out and caused it to get stuck. I think that’ may have caused the original malfunction and me pounding it further caused the buffer retainer to break. I still had a lot of fun. Cause my gun broke I went to the truck got my 2 gun setup and shot the rest of the stages in very good times and one stage win (if I was scored)
  9. I shot a run and gun today and it was quite wet about ankle deep where I fell and got my gun mucked up (no ejection cover ... fail) I got to stage one and cleaned the bolt and ejection port as best I could. The gun fine till the third target 1 for 1 so like 3rd round and then not sure exactly what happened might have been a double feed. But I drop the mag and pull the charging handle kick atleast one live round out but here the kicker a whole brass casing got stuck underneath the bolt inbetween the bolt catch and hammer. (for future reference how should I fix this ?). So i probably didn't do this the right way but I was on the clock so I just moartered the gun till I got the bolt back and that little piece of brass out. Heres where my day ended the buffer retaing knob thing broke off after some vigorous striking... and now the charging handle is stuck in the upper. ended up doing a fun run with my ar and glock afterwards tried getting the charging handle out by putting a 2x4 on the latch and hitting it with a hammer.. Its really stuck any other solutions besides a bigger hammer? so this is probably incoherent didnt sleep after the night part Ill fix it in the morning lol
  10. I did polish it a little and got it down to 5.5-6.5 still sucks but slightly better.
  11. Whats wrong with the cheaper triggers besides pull weight? I just want the reliability of the 24c but I cant afford one right now.
  12. Yup it was area 59 down in Rosenberg.
  13. So you can download mags for classifers? I shot "can you count" very very slowly counting lol and they told me i couldn't have downloaded them before I shot...
  14. At the smith today he noticed right above the firing pin a groove was formed by the hammer and he suspected that if the hammer missed that groove the hammer lost enough energy that I didnt get a strike. What hiperfire do you have im thinking about getting the under 100$ ones not sure of the model just the low end ones. This guns already cost me to much haha.
  15. So I just dropped mine of at the smith didn't mention anything about the dirtyness, but what kind of cleaning are you doing ? I used a wire brush, nylon after. Chemicals were hopps and brake cleaner.
  16. I want to take the hole thing apart and dump in an ultrasonic. but I Cleaned it up and its pretty much a new gun <1k thru it so not much dirtyness.
  17. Did you ever have any problems when using the standard psa buffer?
  18. I’m looking for reliability I don’t care about recoil impulse or any of that. Just trying to make it work.
  19. No dude blew me off found someone who would pay way more. Using just factory ammo federal 115 brass, Winchester white box 115, Winchester NATO 124, federal 115 aluminum, brass blazer 115, 147 freedom munitions and even some hot plus p Hornady something. They all causes the same malfunction but especially 115 federal brass. nope just my taccom bolt, I’ve been looking around to see if any local guys will sell me a bolt or taccom 3 stage buffer.
  20. So I think its somehow the buffer not returing the bolt to the full forward position but because this has only happend on the clock i've never stopped to see. I dont think its the trigger because I still get the "plink" noise of the hammer falling (same noise as when you dryfire ) If you want to see a video I can post it to youtube and send a link. EDIT I added a link to a video of the problem I was describing. I will change out to the stock trigger.
  21. So I ended up building the pcc from hell. Problem: So I built this pcc with the parts listed below, for the first maybe 400ish rounds the gun ran fantastic, then during my first stage I got to the end of the stage and pullet the trigger and got nothing I got a dead trigger, afterwords I pulled the bolt and the firing pin was stuck just popping a tiny bit outside of the firing pin hole, creating very small dimples in the primers. I cleaned and lubed the firing pin and cleaned the firing pin hole as best i could with a wire brush. Then it started failure to fire 1-5 shots into a stage, on every stage. So I would eject the round pull the trigger and get a click (checkout my instagram @andrewt556 for a video) after ejecting 1-5 rounds it would run again. post stage pulled the bolt and the tip of the pin looks uniform/okay however the rear of the pin has a slight mushroom very slight hardly noticeable, then I notice the hammer of the trigger is causing a indentation right bellow and above the rear of the firing pin in the bolt. I pulled the Original taccom firing pin and installed a CMMG 9mm firing pin with a new spring. I still ran into the same issue with a new pin. I shot another 11 stage match today and shot for fun at the end 400 ish rounds and every single stage I had to eject a round at some point. In practice however it would run for the 6 round plate rack flawlessly. Summary(sorry for length I'm trying to be as descriptive as possible) A few rounds in to a stage I pull the trigger and nothing happens(hammer falls but no strikes on rounds found on the ground post stage) eject the round same thing then suddenly starts shooting again after repeating the process 1-3 times. Parts: Taccom Barrel and extreme bolt replaced the taccom (the "old" style) firing pin with a ccmg firing pin. changed the spring and retainer too PSA lower with the stock buffer https://palmettostatearmory.com/psa-9mm-billet-complete-glockc-style-magazine-moe-lower-blk.html CMC 2.5 lb trigger https://www.cmctriggers.com/standard-trigger-pull-flat-2-5-lbs/ solutions: No f_cking clue someon suggested heavier buffer wight and a lighter spring. not sure what to do, I need this running 100% july 7th so I dont have time to wait for parts. PRimary arms however is local to me. Thank you PS sorry for poor spelling, punctuation and grammar again sorry if anything is unclear let me know if you have any questions feel free to post here or email me @andrewt556@gmail.com
  22. I recently bought a Taccom Bolt and the firing pin that came with it was heat treated I have yet to fire it yet thought.
×
×
  • Create New...