Jump to content
Brian Enos's Forums... Maku mozo!

AndrewGK

Members
  • Posts

    6
  • Joined

  • Last visited

Everything posted by AndrewGK

  1. ^ What Memphis said... After a good amount of experimentation, you'll figure out that short stroking the bolt will produce a flatter shooting gun and if you want to take advantage of that to its fullest potential, then you'll disable your LRBHO. I've got mine setup with a Blitzkrieg Hydraulic buffer, Sprinco white spring, and 9 or so quarters stacked on top of a H11 wavespring plus one more quarter between the top of the wavespring and the buffer. You'll have to play around with springs and shims (quarters) to fine tune everything. Type of ammo, type of BCG, type of barrel, type of spring, type of wave spring, and preferred recoil impulse are all things you can change. Soon you'll figure out that there's no perfect combination
  2. JP trigger if you get it installed by JP or are a very good gunsmith otherwise it's about an even tossup between the Hipfire 24c and Elftmann AR-9 trigger.
  3. Inov8 Roclite 290; went with them cause they were less than $70 on Amazon and looked the best out of all the Inov8 shoes I looked at. I don't have any complaints about them and they double as my hiking / trail running shoes.
  4. I had two new TF extensions which exhibited similar problems intermittently. I started with manually filing the internal base of each magazine which helped a little but didn't quite do the trick. After that i took the follower and LIGHTLY filed any sharp corners, especially at the front and back of the follower, and haven't had issues since.
  5. I believe you can achieve the most weight savings on the GMR from removal of the locknut (propriety tool and heat needed) and barrel but at that point I'd rather just get a Taccom ULW complete upper.
  6. Leupold DPP 2.5 moa mounted to 0.5" riser using the picatinny cross slot adaptor
×
×
  • Create New...