BlackLion

I've been using the Holosun 407C and 507CO slide-mounted to other guns without issue. The 507CO has a 8 MOA Circle that almost resembles a large dot which I find fast/easy to pick-up. However, it might now be discontinued.

EGW sells a SAO Hammer for the P9 but I don't know if it's shaped differently than the one you have. It says it fits EAA Competition guns also. Therefore, an EAA Witness hammer may also work.

I tried one and felt the reset was not as positive as a stock trigger. Every other aspect was a big improvement though.

Did you ever find an answer? I was wondering if the Springer Precision Basepads for CZ 75 9mm 17-Rd Magazines would work with this magwell.

I just picked up a 9MM-SF Limited Master. Has anyone tried the Springer Precision Basepads for CZ75 9MM 17-Round Magazines with the Limited Master's factory magwell?

Does anyone know if the Springer Precision Basepads for CZ75 9mm 17-Rd Magazines work with the DLM-SF Magwell?

This is good to know. I just ordered a DLM-9SF and I've been looking at the Thunder holster. I use the QLS forks on all of my holsters and was wondering if it would attach to the Thunder. Any chance you have a picture?

I've been seriously considering a Limited Master SF 9MM. Be sure to tell us how you like it.

A gun of that age will probably require the Full Length grips.

As per Patriot Defense: "We know that new models are interchangeable between large and small frame but we don’t know about the older models." I guess there's only one way to find out for certain. I'll share my findings when I receive the part.

Will the Witness Gold Team Extended Single Side Safety #102110 fit a Small Frame Witness? The gun is a 1992 Witness 9MM Small Frame with pictured opening. If not, is there another option with a full-length paddle? I already have the (standard) extended safety with tapered paddle.

I have their Axion Competition Holster; Heavy Duty for my Canik TP9SFx. I purchased it because it's compatible with the Safariland QLS. It's a nice holster but I think you can get a better holster for a lower price. Also, you don't need a holster if it's an outdoor GSSF match. I always shoot from a bag at those matches.

https://outerimpact.com/wp-content/uploads/2021/04/RED-DOT-PATTERN-INSTALLATION-INSTRUCTIONS.pdf

I don't have an issue with excessive overlap but I wear the belt backwards with the buckle to the rear. This allows more space up front for ELS Receivers. Here's a photo of the BOSS with QLS setup on the 1.75" belt..

Pants Size: 32" Inner Belt: 34" Outer Belt: 36"

The BSPS BOSS Hanger with the Standard Belt Mount will fit the Safariland ELS 1.75" belt. Order the BOSS with the Safariland Holster Mount option (Y-plate) and the Short spacers. Attach the Hanger to your belt. Attach the Y-plate to your Comp-Tac International holster. Then attach the Y-plate to the Hanger using the Short spacers. If you want the ability to quickly/easily swap different holsters onto the same Belt and Hanger, then attach a Safariland QLS Plate (female) to the Y-plate. Attach a QLS Fork (male) to your Comp-Tac Holster body. Discard the spacers included with the BOSS Hanger and replace them with machine washers. With most holsters, this will maintain compliance with USPSA/SCSA Rule 5.2.5 for Production Division. Mount a Safariland QLS Fork to any additional holsters you wish to use. Obviously, these holsters must have a Safariland mounting pattern. The Red Hill Tactical holsters can be ordered with the Safariland pattern. I own and use this exact belt/hanger setup with Comp-Tac, Safariland, and RHT holsters. I will check the belt sizes I selected and let you know.

The Glock pusher doesn't fit certain sights, the MGW is far superior. You can also purchase the MGW Slimline shoe to use the same pusher on the Slimline models(42,43,43X,48) as well.

Did you resolve the issue? I'm having the same issue with a Hiperfire Hipertouch Competition trigger in my FM Glock Lower. The trigger worked flawlessly in a CMMG Colt Lower with the same upper receiver, Blitzkrieg 9mm hydraulic buffer, and Sprinco Orange .308 buffer spring. I tried 2 different upper receivers and 2 different bolts; FM and CMMG.

Thanks, although it's not nearly as nice as your setup. I've only used Remington Golden Bullets so far. They have run flawlessly.

I like it. I created a similar setup; Advantage Arms 22LR Conversion Kit for Glock 17/22 JP JPoint Mount Adapter for Glock #JPA-G Trijicon Red Dot Sight; 4 MOA

Yes.

I have installed the following parts on my Buck Mark: Tactical Solutions Trail-Lite 4” Threaded Barrel Tactical Solutions Trail-Lite .900 Compensator Tandemkross Victory Trigger; Textured Allchin Browning Buckmark STS Mount Vortex Viper Red Dot Sight; 6 MOA The weight of the gun was significantly reduced when I replaced the original 5.5" Camper UFX steel barrel with the TacSol aluminum barrel. I feel this improves handling and allows me to drive the gun faster to/through the next targets. In Steel Challenge, you're not reloading on the clock so I didn't bother with an oversized magazine release and basepads. For RFPO; I use the Allchin STS Mount with a Vortex Viper. The Viper's Picatinny mount is removed and the optic attaches directly to the mount. This brings the optic closer to the bore by eliminating the added height of a Picatinny Rail and Mount. OuterImpact sells a similar mount that is compatible with a wider variety of optics. For RFPI; Dawson Precision sells a Fiber Optic Front Sight.

Update for anyone else with a P-120: The CZUB Magwell for the CZ75 is VERY tight and will require fitting. The Czechmate/TS model is too large. I should have ordered the Shadow model.

You guys are awesome. Thank you very much for the help and fast replies.

Tactical Solutions PAC-LITE MK Series Holster https://tacticalsol.com/Detail.aspx?PROD=1365487&CAT=12587 I have the TRAII-LITE Version for my BuckMark equipped with Compensator and Vortex Viper. Works well.