Rpope423

I got my followers from glock store says 10 on them. I feel you past 2 majors It’s almost costed me.

What kinda load data your shooting on a 13lb? I’m using a 15lb and been debating giving a 13lb a try

I actual was able to get some range time yesterday and I loaded 20 rounds in them and alternated back and forth and didn’t have the first issue, I’m very pleased with MBX 140mm spring especially for the Money. I also messed around with followers and put the correct follower in also

new follower on left and old follower on right, you can see the height difference in them

Alright so apparently there is 2 style of followers new style and old style, I order 3 new style from Glock store cause that’s what I thought mine was but I’m unsure of what’s going on. Been having feeding malfunctions so I ordered MBX 140mm springs and new followers as I’m putting in the followers I notice they are not coming up as far as the old followers and can’t figure out, can some one explain what’s going on here this is what Glock store stays ***Old Version - Magazine Follower for .40 original style - marked .40 & 5 - fits ONLY mags factory-supplied w/ "5" or earlier followers and also .40 10-rd G22-G35 mags w/ flat inside guide ribs only - marked .40 & 5New Version - Magazine Follower for .40 cap-style - marked .40 & 9 - fits mags factory-supplied w/ "6", "7", "8" or "9" Followers****

TTI are ismi and didn’t seem to last long. mbx sells custom 140mm springs I’m gonna give a shot

Do I have to call them or can I just order from website

What is everybody running for +5 pads for 40 cal spring wise? I’m running TTI pads but seems like my springs are getting weak as I’m having feeding issues every now and then. I find the TTI spring that comes with the pad to be okay but doesn’t last very long IMO.

Did you check the trigger safety it’s self on the shoe? To make sure it’s clearing that cutout? I had one do that one time and it was that piece inbetween the trigger shoe

Yeah that’s what I’m afraid of or the mag cracking

Yeah true gettin the basepads off are such a pain. That kid that won A class limited is an absolute hammer him and his brother.

It was atomic blast, and nah I didn’t cause well it’s a Glock lol did you shoot?

172-174

I had stove pipes on almost every stage except 5 of them. 182gr Coated on 4.3gr titegroup 1.13OAL with a 15lb spring

That makes sense, it’s just weird cause the mags I used run fine in his gun and it’s setup identical to mine as far as parts go the mags I normally run are factory mags with factory followers only difference is Dawson +0 base pads on 2 of them and a tti +5 on 1 of them.

I’m shooting a Glock 22 with a sight tracker setup I shot my first major yesterday and used a friend of mines mags cause he had 3 with +5 TTI pads because I only had one mag with a +5 on it. first 2 stages everything ran flawless next 2 stages I had a stove pipe halfway through stages. figured it was a recoil spring so I changed it out ran fine for 2 stages then went back to stove-piping. Didn’t wanna change anything else out so I just dealt with it for the next 2 stages on my last stage I pulled my mags out and used them and it ran flawless. Why would mags be causing stove pipe? I ran 1000 rounds through that gun in the last month and never had the first malfunction then all of a sudden I use different mags and have issues. Anybody got an input on how mags could do that

Shoots just fine a local guy in my area shoots it in his gen5 factory

I shoot a Glock 22 with a 35 threaded KKM barrel and sight block and it’s pretty accurate if I had to say. I can tell a difference.

That guide rod isn’t for a 17/34 mine measures to 3 1/2 inches click here for measurement

Click here to see TTI guide rod in my 34 gen 5

Mmm no something isn’t right

Looks kinda short. did it come with the guide rod adapter that goes at the end of the slide where the guide rod slides through?

I’ll be shooting Coated I forgot to mention that so should I give tite group a try or go ahead and try something else? I don’t want any kind of issues if the gun is gonna get to hot

I’ll be shooting a Glock 22 with a 35 barrel and Taylor freelance sight block so I’m probably looking at 172PF with 4.6 grains if I’m guessing

I’ve recently decided to move to limited major I’ve got everything together exceot for a load, I’ve overheard some people say not to use titegroup for major loads and I’m curious why they said that? Any input is appreciated