Lucreau
Unclassified-
Posts
33 -
Joined
-
Last visited
Content Type
Forums
Profiles
Events
Store
Everything posted by Lucreau
-
Lok grips came out with a new grip for the cz75. Is it legal for carry optics? The grip has a built in “magwell”, but is still the grip and not a separate piece for the magwell. Is this a go for carry optics? https://lokgrips.com/cz-gun-grips/cz-75/palm-swell/veloce/cz-75-palm-swell-veloce-target/
-
Took about 6 weeks for my Ibejiheads order
-
I just got them. Damn they are nice. I don’t have any inserts for them though
-
I just got a pair of SSI aluminum grips and they are sweet. FAR better than the lok grips I had on previously. Very grippy in all the right places
-
I’m not entirely opposed to trying other powders. But I’ve got powder that’ll work, and to get back out to an area to chrono is 90m from me. With a screaming wife and 2yo at home it isn’t the easiest task to be going back often
-
I would be open to trying another powder. BUT, I’m sitting on about 12lbs of N320 lol
-
Loading up 147gr HST defensive ammo. Using N320 and 3n38 to achieve near 1000fps. this is defensive ammo and won’t be shot often or in high quantities. I notice some cratering with the 4.2, but that’s about all I can see. Even the 3.9 is slightly cratered first pic is max recommended load of 3.9gr n320. Get 939fps second pic is above max at 4.2gr n320. Get 988fps third pic is below recommended of 3n38 at 6.2gr. Get 1032fps id like to run the 4.2 on n320 as the 3n38 fills the case and the bullet smashes the s#!t out of it and get all sorts of OAL variances.
-
Didn’t realize my uspsa membership had Expired in February. Shot a match last week and got a decent classifier score. I just renewed my acct today, will the system back date and still upload that classifier score? It said I have until April to renew, just want to make sure thanks
-
I’m in for updates if anyone’s gotten shipping notifications also
-
Quick update. Swapped the thicker shock buff For the thinner one, and had zero issues at my match. Got a few springs on standby but as of now she runs
-
I got a 10lb and a 9lb spring headed my way, hopefully that’ll do the trick
-
Ive got the 10x in my shadow 2. I put a single ragged hole with 10rds at 20y standing. Not too sure what more you could get out of a $350 service and 8-10 weeks
-
So I got the gun in and it went right out for milling so I hadn’t shot it in its stock configuration. im able to put a piece of brass in the breach face and knock it on my work bench and it holds the brass. I did order an extra power extractor spring and a 10# recoil spring. one thing I did realize is that the shadow 2 comes with a shock buff installed, and to me the stroke is very short. I’ll be pulling the shock buff as well to help the slide move more rearward.
-
Another thing I am now considering is the factory shock buff. With it in, the breech face opens juuuuust enough for a case to eject. Possibly removing that will help too
-
I’m running off the shelf magtech 124gr 9mm. Haven’t chrono’d yet, but with their on the box velocity should be around 135PF. I ordered a 10lb spring, and also an extra power extractor spring to see if that’ll help rip the case out better
-
i.e an extra power extractor spring? Have inspected the extractor and from what I can see it is all in order. Clean, no damage etc
-
Ammo is magtech 124gr 9mm. I gave up hand loads once I got out of open. I have also read a few instances where an extra power extractor spring worked for a few others having the same issue. Going to give that a try first before the recoil spring
-
I’ll give that a try, thanks! I hadn’t even shot it yet. Got it in and shipped it out
-
Got my S2 slide back from getting cut up for CO. Running an 11lb recoil spring. Got maybe 5 stove pipes in 400 rounds today. Would I need a lighter recoil spring?? Or a heavier spring to give the case more time to extract
-
Got my S2 slide back from getting cut up for CO. Running an 11lb recoil spring. Got maybe 5 stove pipes in 400 rounds today. Would I need a lighter recoil spring?? Or a heavier spring to give the case more time to extract
-
Trigger drops hammer from half cock. Is this “illegal”??
Lucreau replied to Lucreau's topic in USPSA/IPSC Rules
Got this fixed last night. Comparing the new bow to the old it was slightly longer. Shortened the bow with a punch while installed and now the half cock engaged, and doesn’t drop with the trigger