Tantal
-
Posts
31 -
Joined
-
Last visited
Content Type
Forums
Profiles
Events
Store
Everything posted by Tantal
-
Tactical Solutions 1911 .22LR Conversion
Tantal replied to BallisticianX's topic in 1911-style Pistols
I'd just call tacsol and order the correct mags. -
Anyone know where to find a threaded barrel for these conversions?
-
Anyone fit an elftmann trigger on their AK-V?
-
2011 frame If anyone has a kit they want to get rid of I'll gladly purchase to get some spare stashed away.
-
I have a similar problem. Always get a light strike on the last round. What I have noticed that there seems to be a lot of tension or drag on the firing pin.
-
Well my 2211 is still here and my favorite .22LR so far. I want to get more mags before I can't. Anyone know where to find more tacsol mags?
-
Anyone know if the A3G carbon handguard and Taccom ULW Comp play nice together?
-
I received my trigger group back from MOA with the lightning load lifter installed. I was a little concerned as I was not sure if it would change the way the M3K functions. I'm happy to say it runs exactly as before, with the obvious exception of the auto load feature. I'll be running my M3K tomorrow in a match, if things go well, I'll never have to use it. But knowing life it's bound to save me time on the clock at some point. Time to practice some more quad loading.
-
I went with the Taccom stage saver on my M3K, little tall off the handguard but it works better than what I had before (matchsaver bolted to OEM guard).
-
I got the MOA heavy bolt system installed in my M3K. Prior to the install it wouldn't run any of the Fiocchi 3gun slugs or buck. It will now run the Fiocchi JM 3gun slugs, with no issue. Am still having issues with the Fiocchi JM 3gun buck shot. Curious what is the lightest buck shot you guys have come across that will reliably cycle in the M3K?
-
I just went through this decision a few weeks ago. I ended going with the Tacsol kit. Only downside is the cost of magazines. Runs amazing.
-
Looks like the Briley handguard for the Stoeger will be out soon. Put my name down on one. Briley Stoeger M Lok Handguard
-
Well I got a Tacsol mag to test out. Took a good bit of fitting but it goes in smooth and drops out. I had to take a good bit of material off the slide stop but it functions as it should. Ran through 400rnds at the range today to get her sighted in. I had a a handful of failure to feeds with the Aguila, but the CCI mini mags (1235fps) felt the best and ran flawless. Best group of 10 @ 25 yards attached. Now I just need more mags, and to figure out the finish...
-
Shot a steel challenge match yesterday. Was able to get some rounds through my 2211 build afterwards. Tacsol magazine is still in route, but fiddled a bit more with the Advantage Arms polymer mag. I took schaet's advice and cut the spring 1/2" at a time checking with dummy rounds. With a total overall length of 4.5" I got acceptable results on the bench to warrant a test fire. Anything below that and there is not enough tension behind the last round. 2 1/4" is too much and left play between the last round and follower. The feed lips on the LH side also have to be trimmed 1/16" to clear the extractor. After about ~50rnds or so it started to feed more reliably but not 100% still. I did have some strings with no issues throughout the whole 10rnds. Maybe with some work on the feed ramp it will help.
-
I got my 2211 roughly together on a dedicated frame. I picked up two advantage arms mags but 90% of the time the round is fed into the top of the barrel. I'll try trimming the spring down a bit to see if that helps. So far I would not recommend these advantage mags, ordered some tacsol mags to try out.
-
Thank you all for the input. I will be putting this together as a dedicated .22 build. Is there anything I can do to set myself up for success? I've read elsewhere to run a 21# main spring aside from that not much more. Does anyone have experience with other wide body mags? Trying to find an inexpensive option to the billet mags they offer.
-
Hoping to lean on the groups experience here. I have a Tactical Solutions 2211 conversion on the way, after doing a little more research I'm starting to doubt my decision on going with the tacsol setup vs the Marvel Precision Unit 1. How do the two stack up in action pistol competitions? I understand the accuracy is not as good with the tacsol, but i'm more concerned in how reliable the setup runs.
-
Huge Thanks to MOA. Had them do a few things to my M3K, amazing work, great customer service.
-
Is there a good method to follow on tuning all three together?
-
Does anyone have pictures/dimensions of where they installed set screws in the trigger and trigger housing to make it adjustable?
-
I bought some cheek risers with mine. The one that ships with the stock feels the best for me, anything taller and I'm looking down at the barrel.
-
2018 will be the year of an AR10 based shotgun!
Tantal replied to gose's topic in Shotgun - Technical
Has anybody on here been able to get there hands on a Genesis Arms rig? I also have not been able to find much info about the intrepid tactical RAS-12 upper. Tried searching but it's crickets with that one. Intrepid Tactical RAS-12 -
I'm a big fan. I ended running mine with no spacers which lead to a much better length of pull for my size. With the original stock the gun felt really long. It also fits in my travel case now with the tube on it now which is nice.
-
This is how I figured out 1.142 COL was too long. It wouldn't spin freely. I made some more rounds of varying COL. 1.120" is the threshold where rounds would spin easily. I dialed it back to 1.115". Measuring a Bullet, and the amount of powder in the case, vs how much of the bullet was sticking out, I was able to verify i'm not compressing the powder. I'm going to start at 1.115" and see what happens.
-
Understood. It sounds like there is some experimenting to do with setting COL. Is there a rule of thumb or a way to determine proper COL? At least for a safe starting point prior to running any rounds through the gun. My goal is to end up with a load that will work with both my PCC and my Shadow 2. PCC is running a ULW barrel.