aales1

Guys you should see prices for Tanfoglio in Europe. Stock 3 - 1160€ Stock 2 - 1750€ Limited Custom - 1990€ All those are standard/non xtreme. If you want an extreme you will need to add more than 500€ on top of that price. On the other hand, CZ Shadow 2 is a bit more than 1200€ which puts it in the range of Stock 3.

Hey, just bought Bul Sas 2 Standard, which is their "entry level" 2011 style gun made for IPSC Standard devision. I own a few firearms and I had owned a few more and I must say this one is by far the best made pistol I have ever had (it is also the most expensive ) You can see that is it hand fitted and parts seems very high quality (all parts are CNCed). I like to tweak all my guns, most of them as soon as I buy them, but this one is perfect out of the box. Trigger was a bit heavy from the beginning but after 100 rounds it is much better, maybe still just a little too heavy for my taste (will see after a few hunded rounds). Only strange thing is that I received 3 magazines, each with different base pad??? There were also 2 other rebound springs, a few small springs, screws, spare rear sight leaf, cleaning rod and a bunch of stickers in a box. Owerall for me it is 10/10. Would buy again in no time.

Hi, I am currently searching for a new hammer for my Limited in 45 (SA only gun). Did you also try new unica SA only hammer? Otherwise I will probably go with Delta SAO. I did some polishing and put xtreme medium hammer and firing pin spring and trigger is light enough for me, but as you said you can feel a creep and a reset is long. Thank you! Best regards, Ales

I do not know why the link is not working. Here is the print screen on the page.

I do not know more about it, its the first time I saw it, but apparently Tanfoglio makes one: https://www.tlgunshop.com/PBSCProduct.asp?ItmID=27026525

Probaby not. I have a Limited SA and its hammer does not have a notch to connect a disconnector. From what I can tell you need a hammer, a disconnector, a disconnector pin (to hammer) and a DA/SA trigger. Best regards, Aleš

I have both. from measuring large frame grip is slightly larger (1-2mm and 0,5mm thicker), but this might be more due to that large frame is old model and small frame is new model. Best regards, Aleš

You are the best. Thank you for all information. I have never seen this on any of my pistols, so I was worried that it might damage firing pin on the long run. Thank you again!

Hello guys, so a new strange thing is happening with my Tanfoglio Limited 45 ACP. I have noticed that primers after firing have rub marks or something similar. It looks like when gun is ejecting empty brass, that firing pin is not retracted fully and it slides on the primer. So far I have tried: -removed firing pin block (no change) -checked firing pin (no damage) -checked firing pin spring (looks ok) -cleaned firing pin and spring (no change) If I only load a round into the chamber, there is no damage. If I put fired brass into gun, dry fire it, and eject it by working slide by hand, no damage occurs. Is it possible that gun is ejecting brass so fast that firing pin is still "out"? I use reloaded ammo, with Murom large pistol competition primers, but I also fired a few with standard S&B primers and its the same. Thank you very much for your help! Best regards, Aleš

Yesterday was the first time I saw this gun. From what I can tell I think it is fantastic and my primary use would be IPSC. I was in contact with our importer (Europe) and he said they have ordered a few and will be available sometimes after September or even October. I am planning to make a reservation on one. Can you talk me out of it?

Unica grips are thin. Basicly same as new tanfoglio alu grips (not extreme) but with a bit more bling.

I replaced stock firing pin for extreme firing pin on my Stock 3 (small frame). From what I can tell dimensions are the same (extreme suppose to be 10% heavier). I do not know about Unica firing pin, sorry.

I was trying to catch reflections with light so slide looks worse on pictures than it really is: http://shrani.si/f/3t/rl/wg5o5n6/20190415211952.jpg http://shrani.najdi.si/?1t/zy/4VOQI1Ro/20190415211946.jpg http://shrani.najdi.si/?32/Mk/2rDm8lBS/20190415211939.jpg http://shrani.najdi.si/?2k/wb/11ONFpOo/20190415211906.jpg http://shrani.najdi.si/?1k/Cm/4KgflXOC/20190415211857.jpg http://shrani.najdi.si/?2f/xH/2grqPEuT/20190415211842.jpg

This might be a case, but maybe it is just my fault draging up and down everything for quite a few times trying to find out if barrel is locking completly I had range session again today and I clean everything, "wear" on lugs is the same as it was. Gun has now close to 500 round thru it and I think (I hope) it will be good.

Hello guys, did anyone found any aftermarket wood grips for Tanfoglio (Large frame)?