Oldhand

I'm going to leave it stock for now and roll with it. Ill give an update on the performance.

I might try the 13, see how it is. I didn't get to shoot it today as I'm getting my daughter ready for her first steel shoot tuesday

Any suggestion or tricks to mount the DAA to the safariland ELS belt? The ELS belt is 1.75 ato big for the mount, did not know if someone did this without a adapter?

Just picked up a TSO in 40 S&W any suggestions for the recoil and hammer springs as it comes with a few new ones. Factory loads to start with , surprised how tight gun is, just did first clean and lube before first rounds today.

Had one customer here in town, 4 hour turn around and custom molded. Will post picture after I figure out this posting system..lol

The STI one from Stoeger I ordered is not in stock, had them refund my money and have found a local guy that makes them with a 3 hour turn time custom molded to the gun for the same price as a blade teck so I'm going that option.

I like, the lead time sucks though..

Here the other I have been looking at. http://www.ipscstore.eu/en/thumb-rests/2254-57-102121-toni-system-ad3sx-thumb-rest-3-holes-2000000022543.html

Heres one http://www.ipscstore.eu/en/thumb-rests/1398-57-102011-toni-system-ad3dsx-thumb-rest-3d-2000000013985.html

Have you looked at Toni System products yet, pretty cool.

The STI looks like a no go.. Any one else have an idea before I get one custom made?

ordered an STI one from Stoeger, we will see how it fits..

I need information looking for a holster for a RIA Ultra Tac 2011 9mm, http://armscor.com/firearms/tac-series/tac-ultra-fs-hc-9mm/ Mods, I'm looking for the model number or make of one for a youth shooter, as the web sights don't have the model, not looking to buy one off the sight.

Anyone got a recommendation for a Tango Gunsmith in the Mesa / Phoenix area?

Well that sucks.....

Does anybody know if the CZ and Tango sights are interchangeable as I'm looking for new sights for TNS the (advantage firefly sights) they make them for the CZ but dont know if they will work on my Limited.

Ok , problem solved. The new followers and springs work after adjustments, I adjusted the spring where they will not hang or drag when either dropping in and fall out free. I also took part of the hook off the follower for the slide lock to keep from catching the mag lip and finally adjusted the lips so that they are wider in the front than back by .5 The gun ran flawlessly for TNS, with no jams or failure to loads in a gravel dusty conditions.

Got parts in and have installed than new guts and base pads, been busy with work but loaded a mag fully and it seems to have solved the problem..

Ordered ill, let you know what happens..

Talked to Henning earlier, he recommended the followers and base pads as normally the tubes are in good shape, so I'm going to order 4 of the kits and see what happens. And seeing as long as they have a 20% discount sale it makes sense to order 4.

I will give them a call, it looks about the same price if I buy the base separate, gram followers and new tubes might as well get them in a one stop shop. I have standard length 14 round mags all K40s, (haven't measured yet) I was looking at Cote website for the springer base plates and new mags ($50) to hopefully solve the problem, or buy new guts and Henning ext base pads for my existing mags and see if that solves the problem, for basically the same money. Like you, I hate spending money twice on the same issue. Question; are the Henning mags in any way tuned by chance.

I have the K40 series mags and its with 4 of them that they do a partial load from initial seating of mag, once things are going no issue with nose diving or failure to load. Going to buy some new mags from Cote to see if that solves the problem..

Having some small issues need a little advice, I also need to get to the 50 posting count too.. Tanfoglio/limited/40cal Having a few of my magazines trigger an auto close( 2 of the 7). I've also noticed tonight that if a seat a full mag (in/out) 4 to 5 times it also will auto close. Not sure if its mag issues, extractor spring etc.. But there have been a few times it will not go to battery and stick half way even with a partially loaded mag ( 3 of the 7). The rounds don't appear to nose dive and cause a feeding, but there are times it will not go to battery and stick half way then a thumb bump and it closes to battery. Do I need to change mag springs and followers ? Extractor spring? Pistol has less than 1k rounds. Running the 12 lb spring now. Factory mag tech 180gr ammo.

This is the invoice for the HC frame that they sent, just used the conversion tables for euros its now $133.00 shipped to AZ. I emailed the guy back just to make sure there for the Large frame and if so I'm going to order a pair and see how the fit and finish is.. Of course I'll post pictures when there in.

They are available for the large frame with magwell (limited) but the invoice with Vat, Shipping is just under $160 with out the screws. So I passed on them just couldn't justify the cost.