Jump to content
Brian Enos's Forums... Maku mozo!

inventive

Members
  • Posts

    3
  • Joined

  • Last visited

Profile Information

  • Real Name
    kees

Recent Profile Visitors

The recent visitors block is disabled and is not being shown to other users.

inventive's Achievements

Looks for Range

Looks for Range (1/11)

  1. 1) Parts (spring, center bush and snap ring ) would be only a few USD, but sending from the Netherlands to the US would probably cost 5 times the value of the parts. 2) And still there has to be made a groove in the existing de-capping pin for a snapring who prevent that the center bush falls out.
  2. Hi all, Had the same annoying problem with a Lee resizing die sizing 9 mm, even with a fine adjusted 650. the very small radius on the mouth of the Lee die don't exept a little tilting of the case. this does not appear with a Dillon resizing die, as the radius on that die is much bigger, but due this big radius it's not resizing as far down to the extractor die as a Lee die. As the chamber of my 9 mm is very narrow I prefer to use the Lee die, but to prevent blocking the press I modified the resizing die. Sins this simple modification, witch centers the inside of the case, never had a case hitting the die mouth.
×
×
  • Create New...