Jump to content
Brian Enos's Forums... Maku mozo!

Tc2415

Members
  • Posts

    14
  • Joined

  • Last visited

Posts posted by Tc2415

  1. 2 hours ago, Stymie12000 said:

     

     

     

    What is the diameter of the EG v2? I have ordered some of their bullets in the past and was getting .3535-.354 diameter. And was getting poor accuracy!

    Just measured 5.  I got right at .3545, pretty consistently.  These have been as accurate as any bullet I've tried in my experience.

  2. Heres what I settled on:

    Czc basepads with czc springs/followers

    Armory craft trigger

    DPP 

    Czc multioptic mount

    Czc extended safety left side

    Sidewinder racker

    Advanced ratio *thumb rest [generic]* (new version for more position options)

    Czc large magwell

    Henning Grips

     

    I bring the same things to matches as Malibu13.  Also agree to be generous with the loctite.

  3. Dillon 650.  I thought they were below flush, but was told by an experienced shooter, they might not be recessed enough.  I'm fairly new to reloading, so I only can go off what I'm told.  Everything I've loaded so far (around 5k rounds) goes bang. Coincidentally, I should've mentioned I've been having issues with my primer wheel on my 650.  It over rotates periodically in one spot, and needs to be manually rotated clockwise a slight amount until it clicks.  The primers still seat just fine or so I thought. I really make sure to seat the primers hard. Can I adjust the primer seating depth on a 650?

  4. I recently started having constant light strikes with my czechmate.  I had switched to win srp, ran about 1200 rounds flawlessly and all the sudden the light strikes started. Inswithxed to cci 400's still light strikes. I tried win pistol primers and still had light strikes. My gunsmith thought I was slightly engaging the czc extended safety, causing the issues.  Had him do his work on that. I had the entire thing cleaned, installed the czc extended firing pin, rami fp spring, even an 18lb mainspring.  Still constant light strikes.  I had someone look at my ammo and thought my primers might not be recessed enough.  Has anyone had this issue?  Could my primers not being recessed enough be causing the light strikes?  Any suggestions or input would be much appreciated.

  5. On 7/3/2017 at 9:40 PM, Hi_Im_Vinh said:

     

    Thanks for the tip ! Been trying to figure out for the longest how to insert images... so here is an image of my TSO that I've added the CZC oversized safety and an aftermarket thumbrest for it from IPSCALEX 

     

    jHYQtC.jpg

    Is the frame around your thumb rest holes flush or is the frame cut?  I'm running a czc .40 upper on my Czechmate, but the Czechmate has the frame cut for the optic mount.  I'm looking for a thumbrest that mirrors the optic mount frame cut.

×
×
  • Create New...