[Shadow 2 Recoil / Shock Buffers]

My Shadow 2 came with a buffer installed and have not removed it. 

[CZ Question]

 

You can make the Shadow 2 IDPA legal in CO. I had my Shadow 2's slide milled and changed the grips to Henning grips and the magazines with the plastic base pad. Total weight is 44.5 ounces. Trying to get a polymer guide rod to bring the weight further down.

 

[CZ Shadow 2 Compact - which division?]

I put a RMR on mine and use it in CO. Could also use it in SSP. With the right magazine pad you could also use it in CCP. 

[New MPA DS9 Limited Optics Comp!]

1 hour ago, redbarron06 said:

Does anybody else get a tuning fork sound when they run the slide or shoot a live round?  I thought maybe it was jsut me but today at the range one of the other guys shooting could hear it also.  I ran it several times checking different parts of the pistol to see if I could get the ring to stop after running the slide.  The only way I could get it to stop was touching the hammer.  As soon as it did the ring would stop.  The hammer is not loose in anyway I could tell no back and forth,  The only part that has any back and forth (left and right) is the beaver tail and that should not ring with a firing grip.  I am thinking maybe the 3rd leg on the sear spring?

 

Its normal.  I have the same hammer on other 1911's and makes the same 'tuning fork' sound.

[Shadow 2 Compact]

4 hours ago, msr said:

The flat safety is not working for me. On the wait list for a left side extended safety. Are these showing up at all in the US or have they been completely unavailable.

I ordered mine from Eric Graffel’s store in France. 

[Shadow 2 Compact]

2 hours ago, 1911vm said:

Does a shadow 2 safety fit the compact? 

 

Yes it does.  I have it installed on mine.

[Shadow 2 Compact]

11 hours ago, ColoradoNick said:

...but I’m debating doing the full cajun gun works package minus the extended firing pin or just a flat trigger and short reset disconnect.
 

Thoughts? From what I can tell the extended firing pin is the only thing they don’t recommend for a carry gun. If I don’t go lighter than the 13# main spring reliability should be fine correct?

I installed the CGW Pro package with the 11.5lbs main spring and the CGW flat trigger on my S2C after about 100 rounds. It now has over 1k rounds of 115gr, 124gr and 147gr. I carry it with Underwood Defense ammo. I’ve used it in IDPA and Steel Challenge but haven’t shot it yet in USPSA.

 

It’s been very reliable and haven’t had a FTF/FTE. I carry it in decock position.

 

 

[Recoil buffer shadow 2]

It came installed on my Shadow 2. Haven't had any issues with it so I leave it installed.

 

[Shadow 2 Compact]

I hope the S2 Compact fits in one of the currently available holsters that are offered for the compact models.

[Nitro Fin 2.0 vs Atlas Thumb Rest Slide Stop]

I have both and prefer the Atlas because of the thumb position. 

[Fitting a new Shadow 2 OR slide]

It shouldn’t need any fitting as long as you’re putting the slide on a Shadow 2 frame. Different frame don’t think it will work. 

[New MPA DS9 Limited Optics Comp!]

11 hours ago, VeilAndrew said:

 Would you be kind enough to post a picture? I wonder how it looks and if it would work well enough for me. I haven't found a picture of one ON a gun, so I'm unsure of the angle.

NP. 
 

[New MPA DS9 Limited Optics Comp!]

5 hours ago, VeilAndrew said:

...I'm probably going to be looking to try 2011 slide stop thumb rests, like the Atlas or PT.

I have the Atlas thumb rest on my Hybrid DS40 and definitely recommend it. Only upgrade I've made to mine.

[What 1911 single stack 45 mags do you prefer?]

Tripp or Wilson. 

[New MPA DS9 Limited Optics Comp!]

The optic plates include the delete plate for the front sight. 

[STI DVC Limited Stovepiping]

Is this a new gun to you?

[MPA DS9 Hybrid Black w/Butler Cut Holster Question]

This is from another thread.

 

 

[MPA DS9 Hybrid Black w/Butler Cut Holster Question]

Are you using it for Limited Optics?  If you are you can use a race holster.  I believe the holsters that are made for the Atlas Titan will also work, but not sure.

[Shadow 2 OR SRO Screw Size]

This is what I ordered to mount my SRO to my S2 Orange with the CZC plate.  Not sure if it will work on the S2 OR. These screws are trimmed shorter. 
 

 

[California CZ Pref?]

I have both the SP01 Shadow and the Shadow 2 but I prefer the SP01.

 

Locally we have a USPSA shooter that uses exclusively the SP01 and has achieved GM in CO and many other divisions shooting his SP01, while we have another GM that shoots a Shadow 2. 

 

Unfortunately you don't have that choice. The SP01 with LOK brass grips and CGW guts is a great competition gun.

 

[Removing Front Sight Post? Is it bad?]

As long as you have the pin in place you should't have a problem.  I took the front sight off both my Shadow 2 and SP01 Shadow and have not had any issues.

[Shadow 2 Buffer or no?]

Mine came with one installed so I left it in. 

[Can’t add photos to the forum, help.]

I can see them fine. Here’s one of them. Cropped it for better view. 
 

 

[CZ SP01 Issue: SA works, DA doesn't]

This is your problem. 

 

https://cajungunworks.com/disconnector-timing/

[Open Gun Pictures]

23 hours ago, Posvar said:

Hbar Turbo?

Yes