sean_stw
-
Posts
155 -
Joined
-
Last visited
Content Type
Forums
Profiles
Events
Store
Status Updates posted by sean_stw
-
Hi I saw that you where looking for a Tanfoglio stock 2 that's production legal. I have one that I am considering selling, I was running it in production but it is currently setup for carry optics but can be easily swapped back to production. I plan to sell everything I have for it including holster and mag pouches.
Here is a list of everything I have and some details on everything. The prices are what I paid for everything, the prices are there just for reference purposes on what I have in everything total. After totaling everything up id like to get $1650 shipped for everything, if you don't want the carry optics parts id sell it for $1400 shipped.
- Tanfoglio Witness Stock II - $950.00
- Dawson .150" tall x .115" wide patridge front sight - $39.00
- Henning production legal basepads (6) - $16.66ea
- Henning 140mm extended basepads red (4) - $30.00ea
- Vortex Viper 6moa red dot - $180.00
- EGW EAA super sight red dot mount - $50.00
- Cajun T3 disconnector installed - $38.00
- Patriot defense palm swell grips - $34.95
- 6 total mags 2 came with gun
- 4 have modified followers for henning extended basepads so
that they dont hang up, it also does not allow last round hold open but the other2 will hold open on the last round as normal
- the 4 extra mags cost - $24.95ea
- Safariland 773 competition size 3 mag pouches with ELS mounting
system, the pouches have been modified to work with tanfoglio large
frame mags (5) - $34.00ea
- Bladetech classic Drop offset holster with tek-lok belt mount for the
witness stock II - $69.99
- Factory extended single sided safety production legal - $29.95
-The stock ambi saftey was to wide to fit the production box
I no longer have the factory ambi safety
- Patriot Defense Lightweight guide rod - $48.95
-Was required to make weight for carry optics
- Tanfoglio xtreme firing pin block and spring - $18.45
- Patriot Defense optimized extended firing pin - $48.95
-The best firing pin ive used in a tanfoglio
- Henning18# lightened trigger plunger spring - $9.95
- Patriot Defense lightened optimized trigger and sear springs - $11.90
- Patriot Defense optimized firing pin spring - $8.95
-A couple coils of the spring have been cut for a harder primer hit
- Wolff 6lb,8lb, 9lb recoil springs - $7.89ea
- 6lb spring is listed for the long slide but works fine in standard length
stock II works good for steel loads for around 100PF loads
- Wolff hammer spring kit 13lb,14lb,15lb spring - $9.00
- some coils have been cut on springs
- Patriot defense optimized 15.5lb, 14lb, 13lb hammer springs - $9.95ea
- All have cut coils and have multipuls of some of them currently running a
14lb with 1.5 coils cut off and 2 shims to increase preload slightly runs great
little to no stacking and lights off winchester primers extremely reliably
- Tanfoglio xtreme firing pin - $39.90
- Tanfoglio xtreme titan hammer - $112.95
- Tanfoglio xtreme medium and light firing pin springs (uncut) - $7.95ea
- Tanfoglio xtreme medium and light hammer springs (uncut) - $10.95ea
- Tanfoglio xtreme one piece sear - $34.90
- Henning Conefit guide rod - $39.95
- Cajun gunworks canik floating trigger pin - $13.00
- Complete new EAA Roll pin kit - $19.95
- Patriot Defense BOLO disconnectors (3) - $45.99ea
-some of these dont work bad instructions from company and also changed things
after fitting some of them and was a good fit anymore. The number one reason why i dont
have them installed now is because they reduce the amount of hammer travel in DA causing
less than reliable ignition in DA unless you use a heavy hammer spring which increases the
DA trigger pull quite a bit but the Cajun T3 disconnector is much better in DA.I have almost all the stock parts for the gun and all i have will go with the gun, internals have been
polished almost everywhere it matters. I just checked the trigger pull over a 5 pull average in both
DA and SA. DA is 5lbs 11.5oz an SA is 2lbs 8.5oz$2530 total spent minus shipping and tax
or about $2130 for the production legal parts including the gun is what I have spent.
- Show previous comments 1 more
-
I appreciate the time you put into listing what you have in this gun. I do not have any interest in the carry optics setup and probably should have put in the ad that I am only willing to pay what these have been selling for as that is what I could back out of it if I decided to sell. That being said, a stock 2 with 8 mags, Boss holster, and 4 ghost mag pouches sold for 1100 a few months ago. Another one sold for 950 shipped with 5 mags. similar work done to it in July. Another in august sold for 900 with 5 mags and similar work done to it. That being said, and I dont want to offend you, 1400 is way more than I am willing to spend. I just sold an SV I had well over $7000 in and lost over $1000 on that sale. And that is from the best gun builder on the planet.
-
I had already wrote everything out for somebody else that was interested in it so wasn't to hard to just copy and paste what I had written out before. I completely understand and am not offended, I gave a higher price to start (you know room for negotiation I guess I went a little high lol) but hey you never know what somebody might be willing to pay and considering the amount and time I have in the gun its always nice to get as much out of it as I can. My price was also including shipping though im not %100 sure on how much that costs but im figuring around $50 give or take. Being that your from Massachusetts don't you have a 10 round mag capacity limit? the mags I have are all 17rd standard capacity. I am open to offers on it and am totally willing to split things up if there are things you don't want
-