sean_stw

Hi I saw that you where looking for a Tanfoglio stock 2 that's production legal. I have one that I am considering selling, I was running it in production but it is currently setup for carry optics but can be easily swapped back to production. I plan to sell everything I have for it including holster and mag pouches.

Here is a list of everything I have and some details on everything. The prices are what I paid for everything, the prices are there just for reference purposes on what I have in everything total. After totaling everything up id like to get $1650 shipped for everything, if you don't want the carry optics parts id sell it for $1400 shipped.

- Tanfoglio Witness Stock II - $950.00
- Dawson .150" tall x .115" wide patridge front sight - $39.00
- Henning production legal basepads (6) - $16.66ea
- Henning 140mm extended basepads red (4) - $30.00ea
- Vortex Viper 6moa red dot - $180.00
- EGW EAA super sight red dot mount - $50.00
- Cajun T3 disconnector installed - $38.00
- Patriot defense palm swell grips - $34.95
- 6 total mags 2 came with gun
  - 4 have modified followers for henning extended basepads so
    that they dont hang up, it also does not allow last round hold open but the other

    2 will hold open on the last round as normal
    - the 4 extra mags cost - $24.95ea
- Safariland 773 competition size 3 mag pouches with ELS mounting
   system, the pouches have been modified to work with tanfoglio large
   frame mags (5) - $34.00ea
- Bladetech classic Drop offset holster with tek-lok belt mount for the
   witness stock II - $69.99
- Factory extended single sided safety production legal - $29.95
   -The stock ambi saftey was to wide to fit the production box
   I no longer have the factory ambi safety
- Patriot Defense Lightweight guide rod - $48.95
   -Was required to make weight for carry optics
- Tanfoglio xtreme firing pin block and spring - $18.45
- Patriot Defense optimized extended firing pin - $48.95
   -The best firing pin ive used in a tanfoglio
- Henning18# lightened trigger plunger spring - $9.95
- Patriot Defense lightened optimized trigger and sear springs - $11.90
- Patriot Defense optimized firing pin spring - $8.95
  -A couple coils of the spring have been cut for a harder primer hit
- Wolff 6lb,8lb, 9lb recoil springs - $7.89ea
  - 6lb spring is listed for the long slide but works fine in standard length
   stock II works good for steel loads for around 100PF loads
- Wolff hammer spring kit 13lb,14lb,15lb spring - $9.00
  - some coils have been cut on springs
- Patriot defense optimized 15.5lb, 14lb, 13lb hammer springs - $9.95ea
  - All have cut coils and have multipuls of some of them currently running a
  14lb with 1.5 coils cut off and 2 shims to increase preload slightly runs great
  little to no stacking and lights off winchester primers extremely reliably
- Tanfoglio xtreme firing pin - $39.90
- Tanfoglio xtreme titan hammer - $112.95
- Tanfoglio xtreme medium and light firing pin springs (uncut) - $7.95ea
- Tanfoglio xtreme medium and light hammer springs (uncut) - $10.95ea
- Tanfoglio xtreme one piece sear - $34.90
- Henning Conefit guide rod - $39.95
- Cajun gunworks canik floating trigger pin - $13.00
- Complete new EAA Roll pin kit - $19.95
- Patriot Defense BOLO disconnectors (3) - $45.99ea
  -some of these dont work bad instructions from company and also changed things
   after fitting some of them and was a good fit anymore. The number one reason why i dont
   have them installed now is because they reduce the amount of hammer travel in DA causing
   less than reliable ignition in DA unless you use a heavy hammer spring which increases the
   DA trigger pull quite a bit but the Cajun T3 disconnector is much better in DA.

I have almost all the stock parts for the gun and all i have will go with the gun, internals have been
 polished almost everywhere it matters. I just checked the trigger pull over a 5 pull average in both
 DA and SA. DA is 5lbs 11.5oz an SA is 2lbs 8.5oz

$2530 total spent minus shipping and tax

or about $2130 for the production legal parts including the gun is what I have spent.

Hi I saw that you where looking for a Tanfoglio stock 2 that's production legal. I have one that I am considering selling, I was running it in production but it is currently setup for carry optics but can be easily swapped back to production. I plan to sell everything I have for it including holster and mag pouches.

Here is a list of everything I have and some details on everything. The prices are what I paid for everything, the prices are there just for reference purposes on what I have in everything total. After totaling everything up id like to get $1650 shipped for everything, if you don't want the carry optics parts id sell it for $1400 shipped.

- Tanfoglio Witness Stock II - $950.00
- Dawson .150" tall x .115" wide patridge front sight - $39.00
- Henning production legal basepads (6) - $16.66ea
- Henning 140mm extended basepads red (4) - $30.00ea
- Vortex Viper 6moa red dot - $180.00
- EGW EAA super sight red dot mount - $50.00
- Cajun T3 disconnector installed - $38.00
- Patriot defense palm swell grips - $34.95
- 6 total mags 2 came with gun
  - 4 have modified followers for henning extended basepads so
    that they dont hang up, it also does not allow last round hold open but the other

    2 will hold open on the last round as normal
    - the 4 extra mags cost - $24.95ea
- Safariland 773 competition size 3 mag pouches with ELS mounting
   system, the pouches have been modified to work with tanfoglio large
   frame mags (5) - $34.00ea
- Bladetech classic Drop offset holster with tek-lok belt mount for the
   witness stock II - $69.99
- Factory extended single sided safety production legal - $29.95
   -The stock ambi saftey was to wide to fit the production box
   I no longer have the factory ambi safety
- Patriot Defense Lightweight guide rod - $48.95
   -Was required to make weight for carry optics
- Tanfoglio xtreme firing pin block and spring - $18.45
- Patriot Defense optimized extended firing pin - $48.95
   -The best firing pin ive used in a tanfoglio
- Henning18# lightened trigger plunger spring - $9.95
- Patriot Defense lightened optimized trigger and sear springs - $11.90
- Patriot Defense optimized firing pin spring - $8.95
  -A couple coils of the spring have been cut for a harder primer hit
- Wolff 6lb,8lb, 9lb recoil springs - $7.89ea
  - 6lb spring is listed for the long slide but works fine in standard length
   stock II works good for steel loads for around 100PF loads
- Wolff hammer spring kit 13lb,14lb,15lb spring - $9.00
  - some coils have been cut on springs
- Patriot defense optimized 15.5lb, 14lb, 13lb hammer springs - $9.95ea
  - All have cut coils and have multipuls of some of them currently running a
  14lb with 1.5 coils cut off and 2 shims to increase preload slightly runs great
  little to no stacking and lights off winchester primers extremely reliably
- Tanfoglio xtreme firing pin - $39.90
- Tanfoglio xtreme titan hammer - $112.95
- Tanfoglio xtreme medium and light firing pin springs (uncut) - $7.95ea
- Tanfoglio xtreme medium and light hammer springs (uncut) - $10.95ea
- Tanfoglio xtreme one piece sear - $34.90
- Henning Conefit guide rod - $39.95
- Cajun gunworks canik floating trigger pin - $13.00
- Complete new EAA Roll pin kit - $19.95
- Patriot Defense BOLO disconnectors (3) - $45.99ea
  -some of these dont work bad instructions from company and also changed things
   after fitting some of them and was a good fit anymore. The number one reason why i dont
   have them installed now is because they reduce the amount of hammer travel in DA causing
   less than reliable ignition in DA unless you use a heavy hammer spring which increases the
   DA trigger pull quite a bit but the Cajun T3 disconnector is much better in DA.

I have almost all the stock parts for the gun and all i have will go with the gun, internals have been
 polished almost everywhere it matters. I just checked the trigger pull over a 5 pull average in both
 DA and SA. DA is 5lbs 11.5oz an SA is 2lbs 8.5oz

$2530 total spent minus shipping and tax

or about $2130 for the production legal parts including the gun is what I have spent.