Jump to content
Brian Enos's Forums... Maku mozo!

KzBoost

Classified
 View Profile  See their activity

  • Posts

    74

  • Joined

  • Last visited

 Content Type 

Everything posted by KzBoost

  1. KzBoost
    I know the TTI Glock ones will fit, but from what I read they are loose. Does anyone have a better solution for +0 basepads? Anyone have any STI/SVI basepads from TTI to test fit on a colt mag?
  2. KzBoost
    I use soundgear platinums. They work great, comfortable and dont get in the way. They are pricey but talk to a local audiologoist and you may be able to get a much better deal than listed on their website.
  3. KzBoost
    Is anyone using .100 wide Dawson sights? Was reading that the stock shadow 2 sights are .240" tall but also read that they were taller. Any got suggestions?
  4. KzBoost
    I ended up doing the same thing. Don't got a scroll saw, so I did it by hand with a dremel. Doesn't look as nice, but it will do the job. Thanks for the idea.
  5. KzBoost
    Let me know if you need dimensions or pictures of any sort.
  6. KzBoost
    Any possibility of making one for the QC10 Colt pattern?
  7. KzBoost
    The power splitter has 4 of the 5.5mm barrel plugs. It depends on the monitor or camera that you opt to buy. In my case, the camera was plug and play, while the monitor required me to splice the wires. I opted to solder a female plug onto my monitor leads so that I could quick disconnect if I ever needed to. It's not hard to splice or solder up some leads, but some experience and tools are required. Im an electrician by trade so it was nothing more than a normal day at work.
  8. KzBoost
    I ended up making my own with these following components: Padarsey 7 Inches TFT Color LCD Monitor Esky EC170-11 Vehicle Car Rear View Backup Camera (No guidelines) EWETON Security Camera Power Adapter 12V 4-way Splitter
  9. KzBoost
    CGW emailed me and said "USE RED"... in capital bold text. I'm probably gonna rip out the blue and put some red in there. I'm sure it'll be fine with the blue, but something about it bothers me.
  10. KzBoost
    much appreciated Atlas! Thanks for the guide. Happy holidays.
  11. KzBoost
    Yup, Ended up taking metal off the CGW disconnector. The metal on this thing is no joke, it's hard as hell. Took me about 20 tries, 4 hours of cussing and a few beers, but I finally got it working. PS: Is blue loctite enough for the adjustable sear set screw? Or do you actually need red loctite?
  12. KzBoost
    Haven't removed that screw, so its still staked in there. I did however notice that the trigger bar spring isnt sitting perfectly in those channels. Is it supposed to? Its still riding the trigger bar and seems okay. Still can't figure out this reset issue..
  13. KzBoost
    I haven't removed that trigger bar spring yet, but I'll check. It seems that if I manually push down on the trigger bar while cocking the hammer, it'll lock up as well. Also when pulling the trigger, the trigger bar doesn't pop upward like other CZ's I have compared to. CGW told me to fit the disco, so I'll give that a shot as well
  14. KzBoost
    Just finished installing the CGW shadow2 kit, my DA and manually cocking the hammer works fine, but if I rack the slide, the trigger doesnt reset and gets 'stuck, pulling the trigger will not drop the hammer. The only way to drop the hammer is to take off the slide and push the sear down. Any ideas?
  15. KzBoost
    save yourself the trouble, skip the elf trigger and go with the hiperfire 24c.
  16. KzBoost
    kimball over at bobcat armament took care of me. Ended up buying a fully loaded 1050 with a bullet feeder. Saved a little money over ordering directly through Dillon on shipping costs. The customer service is top notch.
  17. KzBoost
    Thanks for the info! Any reason you're loading 1.120 and not longer? I was told to load as long as possible as long as it passes plunk test and feeds well.
  18. KzBoost
    what pf are you making with this load? Im working on my 125gr with 1.130 oal and 3.8gr n320. I'm hoping to land somewhere near 140pf with this on a 14.5" JP barrel.
  19. KzBoost
    If you order the pyrex powder hopper from the vendor on this forum (wardlance) it comes with a baffle similar to the uniquetek one already installed. Seems to be working well for me.
  20. KzBoost
    Looking for suggestions on loading 9mm for PCC. Im using 124gr coated lead, VV N320, and a JP Barrel. Anyone got a suggestion that works well for them? My JP's chamber is really long, wondering on what OAL to go with.
  21. KzBoost
    Just a note, if you buy the pyrex powder hoppers from wardlance, his powder baffle also works similar to that of the uniquetek, better infact as it's built in and does not wobble around when you need to empty powder.
  22. KzBoost
    anyway to use this with a dedicated LCD screen? don't want to use my smart phone...
  23. KzBoost
    Extremely pleased with the Reloading Innovations Starlight for the 1050. Super bright, Pretty easy to install and quality product. The only complaint I have about it is the short cord. 9/10
  24. KzBoost
    They had a 4th of July sale... Wouldn't surprise me if they did a blackfriday sale.
  25. KzBoost
    I like the VLTOR Emod. It adds a bit of weight balance to the rear and the cheek weld is the perfect angle for me.
×
×
  • Create New...