vizsladog

4.25?

What weight recoil spring?

I ran a 9lb recoil in my 4.25 and it ran fine. Is this to low of a recoil spring?? Damage anything??

Has anyone had a 2011 milled for one of these?

I bought a P120 to build for carry optics in Idpa. Any idea if a shadow 2 mag release will work in it? I know the sp01 extended will work with slight fitting. Also, looking for recoil spring weight. 12lbs? Thanks

What is the closest to the talon stick on or skateboard tape?

Its not really a known issue. Some people just dont like the way the saftey tab works or is located.

Yes. I had to remove material from the mag release .just sanded it and filed it very lightly until the dropped free. I will check mine to see if it has the bend.

My mags would not not drop free either. I had to sand down the mag release on the inside. Fixed it. Freedomsmith is going to come out with a racer version of the trigger that fixes the issues you talk about. If you email Carlos at freedomsmith he might help you out. They are good people.

Did the glock front sight work?

Sar usa just moved thier whole company. The new president is handling everything. I will reach out to him and see what he says.

So you think the +0 sig square notch base pads will work also?

Yes. I am an idpa shooter. They have new president and he is doing amore grass roots approach. I polished everything up when i put in the trigger. Made a noticeable difference. I will try what you said. i was going to try a glock 20 next because its longer.

No sir.

Awesome. All this helps. I am shooting for them this year and got my gun a couple of weeks ago. I will try your combo out and see how it works.

https://www.instagram.com/p/BwfZHEvn7Wq/?utm_source=ig_web_copy_link

https://www.instagram.com/p/BwfZHEvn7Wq/?utm_source=ig_web_copy_link freedomsmith trigger

Also can you confirm that the striker is the same as a Glock

Also redxgear is going to be making holsters very soon.

Have you swapped the striker spring? I have a ghost 6.5lb I'd like to try. You put in a lighter Glock trigger spring? I tried a ndz Glock 17 guide rod but it was about 5 mm too short.

welcome from Ocala. There is a club that shoots idpa once a month in ocala

I have a m&p 2.0 with an apex trigger

Thanks !

I bought a 2.0 and had the apex polymer trigger put in. It went dead after 50 rounds and I found out they recommend a new sear. My gunsmith who originally installed it put the stock sear spring back in and stretched the trigger bar and it seems fine. after another 50 rounds. Apex recommended their 2 dot sear. will the competition spring kit and 1.0 sear work in the 2.0?

Newbie here from Ocala florida. I did an idpa classifier and got hooked ! Shot my first idpa comp last month and love it