Got2beshooting

And this one shows the feeding issue i am having. This is the hotter load i made up (≈140 PF).

Picture below shows RMR damage.

New parts are ordered. I should have them on Monday. I will update everyone probably on Tuesday after the range. Thanks again!

Thanks for the info. I checked the slide stop and it is installed correctly. I ordered one today. I have been using mostly the 11 lb spring but the issues continues with the factory spring. I ordered an ISMI 11, 13, and a 15 lb spring to test. Someone at my local club has an official mag gauge and all of the TTI extensions fit it. I also ordered all new springs (zev spring kit again) extractor (with new spring) and ejector. They should arrive by monday.

Thanks for the suggestions I will take a look at all of this on the gun and order a 13 lb recoil spring today. I might as well change all of the springs. At 20,000 rounds, it won't hurt. Thanks again for all the info. If anyone else has had similar experiences with this, I would like to hear about them.

Hello everyone, This is my first time starting a post. I have been shooting USPSA for a little over a year and I am now starting to have some issues with my Glock 34 MOS with a Trijicon RMR. I was awarded a slot from my section coordinator for Optics Nationals in 3 weeks (not a good time to start having gun problems). This will be my second major and I would really hate to fly down to Florida (or any match) and have equipment problems. I would greatly appreciate some help. General information: about 20,000 rounds in the gun clean the gun every 2000-3000 rounds zev spring kit from day 1 Shooting reloads (9mm 135gr Bayou Bullets w/ 132 PF) 1. Brass to optic. This has been happening for a long time. The gun still functioned fine. Optic has brass marks all over the ejection port side and glass. It seems like the optic is smacking the brass forward. When I called Glock, they told me I had to send the gun to them and they would check it out. It was not really an option at the time because of my first major. 2. The gun goes into slide lock with rounds still in the mag. This happened a lot with my factory installed extended slide release (after many rounds). I then took it out with no slide lock issues. I ended up putting a factory non-extended slide release in and it was fine. Now it is starting to happen again. 3. The gun will not go into slide lock with empty mag. Some people do not see this being an issue for competitive shooting but, I personal like it. This may not be much of an issue anymore because of the round limit for carry optics being lifted. I am using factory mags with Taran Tactical +6 base pads with 10% stronger spring (meets 140 mag length requirement). 4. Stovepipes and feeding problems. This issue started happening about a week ago, and it is starting to happen often. This does not happen with any specific mag or a specific number of rounds in them. It seems to happen randomly. I have messed around with a #11 recoil spring and a factory recoil spring with the same issue. I have not changed my load data and it has been proven in the past. If you need any more information I can gladly provide it. I would appreciate any help with these issues. I would hate to do any major work to the gun before Nationals but I am simply out of options at this point with the match only being 3 weeks away and do not have a backup. Thanks in advance.

Hello everyone, This is my first time starting a post. I have been shooting USPSA for a little over a year and I am now starting to have some issues with my Glock 34 MOS with a Trijicon RMR. I was awarded a slot from my section coordinator for Optics Nationals in 3 weeks (not a good time to start having gun problems). This will be my second major and I would really hate to fly down to Florida (or any match) and have equipment problems. I would greatly appreciate some help. General information: about 20,000 rounds in the gun clean the gun every 2000-3000 rounds zev spring kit from day 1 Shooting reloads (9mm 135gr Bayou Bullets w/ 132 PF) 1. Brass to optic. This has been happening for a long time. The gun still functioned fine. Optic has brass marks all over the ejection port side and glass. It seems like the optic is smacking the brass forward. When I called Glock, they told me I had to send the gun to them and they would check it out. It was not really an option at the time because of my first major. 2. The gun goes into slide lock with rounds still in the mag. This happened a lot with my factory installed extended slide release (after many rounds). I then took it out with no slide lock issues. I ended up putting a factory non-extended slide release in and it was fine. Now it is starting to happen again. 3. The gun will not go into slide lock with empty mag. Some people do not see this being an issue for competitive shooting but, I personal like it. This may not be much of an issue anymore because of the round limit for carry optics being lifted. I am using factory mags with Taran Tactical +6 base pads with 10% stronger spring (meets 140 mag length requirement). 4. Stovepipes and feeding problems. This issue started happening about a week ago, and it is starting to happen often. This does not happen with any specific mag or a specific number of rounds in them. It seems to happen randomly. I have messed around with a #11 recoil spring and a factory recoil spring with the same issue. I have not changed my load data and it has been proven in the past. If you need any more information I can gladly provide it. I would appreciate any help with these issues. I would hate to do any major work to the gun before Nationals but I am simply out of options at this point with the match only being 3 weeks away and do not have a backup. Thanks in advance.