WarrenZ
Classified-
Posts
70 -
Joined
-
Last visited
Content Type
Forums
Profiles
Events
Store
Everything posted by WarrenZ
-
Mark7 - Evo - Powder Adjustment Knob
WarrenZ replied to rougeqc21's topic in non-Dillon Reloading Equipment
I had to use two wrenches to snug mine up to keep it from changing the powder throw but it has been rock steady since I got past the either ill break something or tighten this up enough to stop loosening up decision. -
Mark7 Evolution - Tuning & Troubleshooting
WarrenZ replied to Nigels1911's topic in non-Dillon Reloading Equipment
I just went through that on mine last night. I think it was a case that ended up upside down and bent the spring so that it caught and got further bent. -
Mark7 Evolution - Tuning & Troubleshooting
WarrenZ replied to Nigels1911's topic in non-Dillon Reloading Equipment
Ok I finally got time to start messing with the evolution that I got about two weeks ago. So far I haven't gotten a mighty armory die I did get a flyer asking for a video to get a discount on mighty armory stuff so not sure if it is a worthy upgrade. They did throw in a 3 die Lee 223 set so I guess that was the free dies they promised with the pre order machines. What's y'all's opinion of the need for a primer or swage hold down die? Should I order those or are they a just nice to have? I have heard that you can use a size die with the decap pin removed. I haven't gotten access to the downloadable manual so that I can get part numbers for parts I am missing or will need extras of. Hopefully I can get the missing parts at the hardware store. I can't wait to get this thing set up and running. -
I have finally received my press I unfortunately dont have time this week to mess with getting it set up. The good news is that means I wont have time to shoot or reload so it isnt a bad thing that I have 3 boxes of stuff in the office waiting for assembly.
-
Mark 7's "bait and fake" on an Evolution
WarrenZ replied to Clint007's topic in non-Dillon Reloading Equipment
I am not sure if they are taking orders for just the evolution at this time last I saw they were only selling Evolution Pros. -
Mark 7's "bait and fake" on an Evolution
WarrenZ replied to Clint007's topic in non-Dillon Reloading Equipment
I ordered mine in April but I have been told mine is in final checks and should Ship "soon". -
Supposedly my press is on the table getting its final checks done and should ship sometime this week. I was almost at the point of canceling the order and going with a couple of 1050s but I am glad I havent done that yet. I hope to get a batch of 9mm out soon on the press when it shows up.
-
Apparently they are re machining the drum and metering assembly from oval to round as they had complaints of powder packing and not throwing consistently.
-
I just got off the phone with Mark 7 it looks like their powder measure issue has pushed the whole schedule back and my press that was due for September might be due for the November time frame. I guess I will have to break out the red beast for another run. As we decided at sectionals I could have had 2 or 3 1050s running by now.
-
Looks like my April order is scheduled for September. That means I'll have to setup the old press for another 9mm run between now and then.
-
The misalignment going into the size die is something I have fought there is enough slop in the Shell plate that the case rim can tilt if it is damaged or thin. This is worse with longer cases such as S&W500. I haven't found a solution other than making my own Shell plate which I'm not able to do.
-
They won't answer an email or their web contact form so I guess I still have an order but can not confirm.
-
$20 and a bag of Cheetos that's my final offer.
-
That is a SJC brass I use it with Taylor freelance brass extensions with that magwell I find the M&P grip a little crowded but I have big hands.
-
https://store.otdefense.com/products/otd-wagon-wheel-tip They call it a wagon wheel it was included with the kit I ordered. If you are just getting started stippling I would start with a few pmags and spare backstrapps first.
-
I Stippled my backstrap with a very bumpy star type texture. I am very happy with the results. so much so I have 3 M&Ps wearing the same stipple pattern.
-
Mark7 Evolution - Tuning & Troubleshooting
WarrenZ replied to Nigels1911's topic in non-Dillon Reloading Equipment
I know my skills is the mighty armory and the MA/Mark7 decap die using the same decap pin I will need several spares. Does anyone know what other dies are included in the press if we ordered before the cut off date? -
I assumed that the rebranded powder measure would be included if it isn't I will just slap a Hornady measure on it. Besides once you have a measure buying the linkages are cheap enough to leave it pre adjusted on each tool head. That is an interesting design I guess this is the problem of buying something from pre production sometimes the final product isn't what is pictured.
-
I'm gonna have to start shooting limited again to conserve 9mm for bigger matches until the press gets here. As soon as I get the press I will have to swap it to 9mm and get loading. I should have ordered it 9mm with a 556 conversion instead.
-
Works good in my CZ Scorpion bolt.
-
Works good for me I have the TF brass ones.
-
Primary optic fell right off the PCC today
WarrenZ replied to Silverscooby27's topic in Pistol Caliber Carbine
One of the PCC shooters I shoot with had to safety wire his qd closed because he kept having it open unexpectedly not sure what mount it was didn't seem important at the time. -
I ran a Colt mag hahn block for years a bottom loader in fact when I finally got a dedicated lower I had to back the screw out then drive the block out with a punch and Hammer it had carboned itself into the lower so I wouldn't worry too much about it falling out. I didn't like the sharp corners on the sides of the adapter which could have used some blending for faster reloads.
-
The recoil won't be anything close to a real steel gun but it is more effective for training for handling draws and point shooting etc.
-
My 9x19 gauge anodized black is tight but if it fits in the gauge it will fit in the chamber.