Jump to content
Brian Enos's Forums... Maku mozo!

MrT_shootsAcz

Classified
  • Posts

    77
  • Joined

  • Last visited

Posts posted by MrT_shootsAcz

  1. Hey MatteeKay, I am wondering if I was the RO involved in this situation... I worked the match in question and had a guy (not you) stop himself close to the end of the stage when his gun stopped working.  This guy was worried it was a squib after trying to address the malfunction first.  Frankly, I never stopped him because I saw no evidence of a squib.  After he stopped he cleared, then went to the safety area and confirmed there was no squib.  I think I know him well enough to believe he would never use the “no squib” rule to cheat if the shooter did have the ability to stop themselves and get a reshoot if no squib is found.  But I do believe there are other reasons we wouldn’t want shooters to be able to do that aside from the cheater concern other folks posted.  For example, like this case, the shooter in the state they are in shooting a stage isn’t always as aware as a close observer as to what is going on with their gun when it first goes down.  Some that participate in this sport don’t even know what a squib load is.  The potential for unnecessary reshoots by opening the rule up to the addition of allowing a shooter to do this is another reason not to do it.  There’s also a reason why certified RO’s are used for bigger matches.  Ideally you have folks who understand the rule book and get it right.  I have no doubt I handled that situation right.  Personally I never want to see a shooter deal with a gun or equipment issue that results in a lower score.  But the rules are clear on scoring that and how to handle.

  2. 3 hours ago, CHA-LEE said:

     

    The weak hand side is the hardest to keep the elbow pointed down while registering the gun in front of your dominant eye. Try bending the elbow a little more or blading your shoulders away from the target a little more as that should make maintaining the elbow down position easier to maintain. We all have a unique level of strength and flexibility so what looks "Normal" when I do it vs when you do it may be completely different. If it helps, when I shoot weak hand my elbow is bent a little more to make the position more comfortable. 

    Thanks!  It feels much better increasing the elbow bend and a bit with how much I am blading.  Now I am eager to confirm in live fire.  Thanks again.

  3. Thanks for posting Charlie.  I have been working on this per your suggestion for a while now and it absolutely works.  With that said, I am struggling to maintain a “straight” up and down grip on my weak hand side.  I can do it, it’s just my elbow has a greater tendency to not want to stay in.  Any tips?  Or do I just need to practice this more?  Of course being mindful of position and not just slinging lead down range.  Thanks!

  4. 33 minutes ago, L3324temp said:

    My local private range was closed this week. I Don’t agree with it at all, a busy weekday would have maybe 6 shooters at any one time.


    Sent from my iPhone using Tapatalk

    I would agree.  Gun stores are open in most states as “essential retail” and some of those have ranges.  So you can go to a stuffy indoor range but not an outdoor range with constant fresh air.  I get match cancellations but I don’t understand why outdoor ranges need to be shutdown.  Especially since most states allow you to exercise during the stay in place orders... I mean I am out of breath after some of our field stages.  It’s exercise officer!

  5. On 4/30/2016 at 11:22 AM, rowdyb said:

    Production here. I plan where my reloads are and know if I'm 1-1 on thing how many should be left in the gun at each point. Almost always it's 8-10 shots. Sometimes 6. So I do not consciously count them but try to have an awareness of how many I have to "play with" at each array.

    And I can only arrive at a new array with 0 rounds, empty gun. 1 round, no mag but one chambered. 10 rounds, sllide lock reload or hopefully 11 with a successful speed reload. That's what I really care most about, am I arriving at the new place with the right amount.

    Should things go off plan I don't hesitate to do an unplanned mag change to get me back on plan for the very next array.

    Plus 1.  This approach has served me well while shooting limited recently too.

  6. On 10/15/2019 at 8:56 AM, B_RAD said:

    Depends.  There are friends I don't mind squadding with and there are some that I try to avoid at all cost.  

     

    You have to figure that out. At least I do.  Though, I've also realized that you can't always avoid the the things/people that could cause your shooting to suffer. So, you should try to work through those issues.  

    Definitely plus 1 to this post.  Especially the working through the less than optimal scenarios.

  7. One area I seem to do better with by shooting with GM’s/better shooters is bringing more intensity to the line with me.  It’s not shooting  faster... it’s making sure I am not wasting time when not performing the shooting in a course.  Movement and even starts.  I don’t try to shoot another persons speed but I will be reminded that a particular movement/position can be done better/cleaner shooting with the big guys.  There are a couple guys that I know I can regularly be within a couple seconds of over a field course.  I found I am much more likely to consistently perform at that level when shooting with them.

  8. 46 minutes ago, rootacres said:

     

    This will be my 4th season now playing the USPSA game. I found myself early on trying to chase the faster guys and causing a lot of problems. Over time I tried to catch things they were doing differently to help me improve. I made Master in Production half way through last season and the biggest takeaway I learned from the faster guys, and it took me a long time to realize this, is that what really starts separating people is what they are doing when the gun isn't going off. Footwork, mag changes, entries, exits etc. Keep shooting with the better shooters. They will teach you far more and will help push the limits of your capabilities. 

     

    This, so much of this!

  9. On 12/21/2018 at 8:50 AM, gerritm said:

    As a PCC & open pistol shooter I would have no problem with a table start facing uprange, but I would suggest doing the same for the pistol start also for that stage. If you are doing it to the PCC shooters only to slow them down or mess with them then I would have a problem with it.

     

    gerritm

    This!  This is all that needs to be done for the post that started this thread.

     

    The rest is rules dialogue about start position.  There are plenty of great posts by folks more seasoned than me so they can continue to debate that.  

  10. Much that needed to be said already has.  One thing I will note is not everyone learns things or processes the same way.  What works for some or even most likely won’t work for all.  To me there are a couple things here... 

    1.  Figure out how you learn best.  Are you visual, auditory, do you need to apply a move or tactic yourself to really get it?  You will see any difference in opinion on these responses can likely be attributed to the fact that not everyone learns the same.

    2.  Understand that while your strength in learning may be visual for example, you still need to understand the why behind what you’re seeing.  Sometimes that’s easily figured out, but sometimes it is even easier or better to listen to the GM  shooter explain.

    3.  Put it all together.  If you just watch a Ferrari go fast you don’t really know how to do that.  You need all elements of learning to get to where you want to go.  Ask the why and how to go with the visual.

    4.  Put in the time practicing with purpose.  From what I have been exposed to Charlie Perez captures this piece best in his teachings and book.

    *It helps to be very analytical in how you like to think about things too.  :)

    I can go into more depth but don’t want to be to repetitive.

     

     

  11. Is anyone using .100 wide Dawson sights? Was reading that the stock shadow 2 sights are .240" tall but also read that they were taller. Any got suggestions?

    My 2 were 240. Not sure I have heard of other heights for them coming stock.



    Sent from my iPhone using Tapatalk
  12. Thanks Cha-Lee!  This is a very helpful review.  I have been using the standard "grippers" and while grip strength has improved I'm still battling forearm fatigue with symptoms of tendonitis after long sessions.  I might have to give this a shot...

  13. On 1/20/2018 at 10:34 PM, sdm702 said:

    a little spendy but the henning group grips are solid. checkering is aggressive and the contour fits my hand perfectly. 

    Plus 1 for the Henning Group grips.  They are aggressive and the contour fits great like sdm702 says.  Keep in mind that they were designed by a top level GM shooter who uses them regularly on his own shadow 2.  I personally have tried all of the thin grips and thin with grip tape, as well as the bogies and scales.  I know a few other folks who shoot the shadow 2 and the shadow 1 and when it comes right down to it I think it has more to do with your own personal hand size and style that you like for how you want the grip to feel.  That said, to date, these are the best that cross all of my boxes off.  I have two as well, one for my primary and one for my backup (both have the checkering all the way to the top).

     

    In regards to the price... you could spend the money on these and be done bouncing around from grip to grip or you could keep dropping $60-$80 every few months on different grips and spend three times more.  

  14. Great input in this thread.  Is there a way to follow a thread for new replies and to keep in a place to reference other than replying to it and getting notifications of further responses?  

     

    Posting something relevant too :)...  

     

    Brief story on something that just happened to me that provided an "aha moment" and an immediate "that Enos guy is a freaking wizard!" thought.

    I was shooting a practice session where we blacked out all of the target except the lower A zone on 4 targets and shot 4 per (oddly, not a target set up I've shot much at all).  Initially running the drill I was shooting at a pace I knew that I could shoot at that distance (roughly 10 yds) and get all alphas but I was still throwing multiple mikes.  I took a break to reload and relaxed and analyzed what I was seeing and not seeing as well as other possibilities.  In getting back at it I just posted up on one of the targets and shot about 90-100 rds at it.  Purpose being to shoot only when I saw what was needed and could truly call the shot accurately.  For the first 15-20 shots this slowed my cadence down but I also noticed as speeding up (as I knew I could) that my hits while being in the center of the A zone were starting to move to the lower half of the A zone (typically when the entire lower A is open I aim at the upper center of the A zone).  What I realized over the next 80 or so rds by being aware and just allowing my shooting to essentially be automatic based on what I was seeing was that my subconscious took over (or whatever else you want to describe it as) and then slightly moved my primary point of aim lower which allowed me to track the sights easier as instead of my black sight rising into black, more difficult to see there, and having to deal with the change in sight picture while tracking the sight from brown to black back into the brown again, by moving point of aim lower allowed me to track the sight easier never leaving the brown of the A zone and thus allowing for a faster cadence/splits.  In hindsight it seems a rather elementary switch, but how the aha realization occurred was the detachment from "thinking while shooting" and allowing myself to be in the moment and increase awareness, thus being the main point... I think.      

     






  15. Double action is not a requirement. The M&P and XD are both single action striker fired systems.


    Valid point... I was thinking more how you could shoot the same DA/SA gun (like a CZ) in limited but for that division could start hammer cocked and safety on. Thanks for pointing that out though.



    Sent from my iPhone using Tapatalk
  16. I don't care about production, but imho the results of part-time prod shooters using crappy plastic guns in the last few nats indicates that maybe all the restrictions aren't actually doing anything worthwhile except preventing people from spending money (maybe that's worthwhile to their wives, lol). I think production would only get more popular if they made the rules LESS restrictive, so that someone who starts out with a $600 gun can gradually tinker with it as desired instead of just throwing it away and buying a custom-shop race 'production' gun. Honestly, the lame rules are a big part of why I switched to SS.  10 rounds, minor scoring, DA/SA or striker fired, no magwells, git 'er done. Easier enforcement, less annoyance, no effect whatsoever on competitive equity, what's not to like?


    +1... we all know it’s the shooter and not the gun making the difference. Who cares if someone puts a different trigger on their Glock??? The start condition in DA and the lack of a magwell are what separate Production to the largest degree. 10 rd limitation is soon thereafter but it’s not like there aren’t other low cap divisions. Keep the rules simple so it’s easier for new shooters to understand and for RO’s to enforce.


    Sent from my iPhone using Tapatalk
  17. 1 hour ago, cheby said:

    I am pretty sure it comes with the GM card in the box

    It does... but it is not printed on the approved USPSA card stock list so I'm still waiting  

  18. 3 minutes ago, rowdyb said:

    I'm tired of trying to defend this, it's not my job to. I asked a question, I got an answer. The end.

    Your initial response was good enough for me Rowdy.  I already have it printed and ready to go for nationals because I will absolutely be shooting my Cajun S2 with bushing.  I'm more than happy to post what happens for all those concerned and awaiting something more.  

  19. 4 minutes ago, Just4FunLP said:

    I'm ready to order an ACCU 2.  It looks like if I order it now I'll get it some time in November.  I can wait a few months for it to make the production gun list, but I'd hate for it to take a year or more.  Anyone have a clue as to when this may happen?  

     

    On 7/22/2017 at 8:14 PM, rowdyb said:
    AIbEiAIAAABECNSF9sKO4pj3qQEiC3ZjYXJkX3Bob3RvKihiMWJlNmZiN2IzMjdkNTlkZGVkY2Y2ODlkNzRmMGNhMjcwY2YyNWNhMAFjNDv9W8_Qm9a3_kSI1GuFms_xgA?sz=32

    Troy McManus

    6:00 PM (3 hours ago)
       
     
    to me
    cleardot.gif
     
     
     
     
     
    Yes, you can do that.
    cleardot.gif
     
     
    On Sat, Jul 22, 2017 at 4:03 PM Rowdy Bricco  wrote:
    Can I install a Accu bushing like I have on my Accu Shadow onto my Shadow 2 and remain Production Division legal?
     
    Accu Shadow is on the Prod list and the Shadow 2 is on the Prod list. My understanding of the process is that adding the bushing requires only internal work on the gun's slide.
     
    As far as external, the Cajun Gun Works 10x bushing has a different external profile than the stock bushing and is allowed in Production. Is this correct and sufficient reasoning to allow the modification I've proposed?
     
    Thank you.
     
    Rowdy Bricco
    A88278

    My understanding is based on this quote... the accu-shadow 2 is already production legal.  It would seem very silly to say that the CGW 10x bushing is alright but the CZC bushing is not. 

  20.  
    If you want to shoot fast you definitely need to get out of the idea that you must have a sharp sight focus (which sounds like what your describing).  Someone whos name might be tied to this forum said you just need to see what you need to see.  For the longest time this statement just pissed me off more than anything since shot calling was a magic trick to me.  You dont need or want a sharp front sight focus for anything but the hardest of shots, otherwise its just too slow.  Shooting fast will be done at a target focus or somewhere in between target and front sight.  You have to learn what YOU need to see in order to make good shots at speed.  The tape has allowed me to increase my shooting speed drastically, it has cleared up what I need to see in order to shoot accurately.  Some lucky shooters are able to do this without the tape, and I wish I could, but my eyes/brain will not allow it.  Sometimes I feel like the tape could slow down my transition speeds but I have not been able to prove that on the clock.  At the end of the day only you see what you see.  Try the tape, it cant hurt anything.  


    Thanks for the reply. It's great to hear that helped in getting you over the hurdle. That said, no, I'm not talking about shooting fast.

    I don't need the info to learn to shoot fast. I'm plenty fast now. Yes, what that BE fellow has said is absolutely right. I fully grasp the concept of "knowing what you need to see at a given distance". I'm still working on refining that at certain distances for sure but I already know I can shoot .16 splits at 5 yards and get alpha hits even on a partial for example (I mention that to illustrate I can see the sights and shoot fast fine). Where the topic and my post/question is mostly directed at, and sorry for not being more clear, is addressing a course of fire quickly while appropriately using the necessary sight picture for the target array at hand. As I said, maybe I start a stage focused on watching my sights (doesn't mean I'm waiting for a perfect or still sight picture, just means I'm shooting with a sight focus watching the front sight bounce up and down) and then find myself drifting to a target focus. Especially after I start moving out of the first position. Despite a target that may require a more refined sight picture I tend to still be looking over the sights to more of a target focus. That's where maybe more exposure and training will help work that out. I have shot a bunch of matches thinking that target focus has a place but I've also heard from some very seasoned shooters that they would not describe any of their shooting as target focus (even 3 yards away). I would think that in what we reference as target focus they are simply using a very simply met sight picture alignment but the awareness is still centered on the sights relation to their target as opposed to a clear focus on the target. In some respects it is very similar but just different enough to prompt another debate for some I guess. Anyway... I appreciate your info on the tape, it helps a lot. I am going to try it after getting back from Area 3.


    Sent from my iPhone using Tapatalk
  21. 22 hours ago, rowdyb said:

    i shoot a 147 grain bullet over 3.10 titegroup if that matters.

     

    i am at 11# recoil spring from czc and a 13# main spring from czc as well (with some modification that makes it more like the 11.5# from cgw)

     

    here https://czcustom.com/cz-75-85-sp01-spring-recoil-full-11-lb-x-1.html

     

    and here https://czcustom.com/cz-75-85-sp01-spring-main-hammer-13-lb-x-1.html

     

    recoil springs of 10 or 13 lbs were tried. i didn't like the timing of follow up shots with either or how they felt with my grip. all personal and subjective.

     

    main spring, i like running my internals all from one source as much as possible. if i ran cgw i'd run all cgw stuff inside. i run czc so i run czc parts inside as much as possible. a 13# main spring will always work, always light primers off and always have sufficient hammer speed. it also helps with slowing the slide a bit during recoil as the slide/hammer/spring all work together. (and I have a personal distaste for super light main springs as i think they're a crutch for poor technique of the double action on a shooter's part)

    Thanks for the info.

     

    I'm in the process of switching from a 124gr over 3.9 of titegroup to a 147gr over 3.2 of titegroup (will switch after Area 3).  Good to know you like those weights with that round.

     

    I presently have a CZC with a few CGW parts that I swapped in it.  I have no complaints with anything either company puts out... that's just the recipe that is working for me.  I will add that I have my 2nd Shadow 2 on the way soon from CGW... looking forward to that to see how nice and smooth they can get it since it will be a "100% CGW build".

     

    I tried the 11.5 CGW mainspring for a little bit before also switching the firing pin spring to their reduced power spring (had the czc one in though) and I averaged about 2 light strikes per 100 rounds.  After switching to their reduced power firing pin spring I have had 0 light strikes over roughly 4500 rounds.  Definitely agree with the comment about super light being a crutch.  My DA shooting is solid and was with an 8# trigger, though my follow up technique needs continuous work, but those are single action. ;)  

      

×
×
  • Create New...