Jump to content
Brian Enos's Forums... Maku mozo!

Esa1195

Members
  • Posts

    20
  • Joined

  • Last visited

About Esa1195

  • Birthday December 24

Contact Methods

  • Website URL
    http://

Profile Information

  • Gender
    Male
  • Location
    Finland
  • Interests
    IPSC Open / Classic Division

Esa1195's Achievements

Looks for Range

Looks for Range (1/11)

  1. You can also use bigger caliper FCD body, just use the internal part for actual caliber. 40 sizing ring does nothing for 9x19 bullet so it does only taper crimping.
  2. I have converted one for 650, no parts needed, just relocated the microswitch.
  3. Match results:http://www.erc2009.no/index.php?page=match_results SAO top 10 1. Peltokoski, Raine 2.Vinduska, Vaclav 3.Halminen, Jarkko 4.Kaislaranta, Mikael 5.Iso-Tuisku, Kimmo 6.Horner, Daniel 7.Hintsanen, Antti 8.Runtti, Petri 9.Rommen, Kristian 10.Niemelä, Juha SAS top 10 1.Hyyryläinen, Isto 2.Neal, Kelly 3.Johnson, Robby 4.Miller, Kurt 5.Riste, Mika 6.Kuisma, Mikko 7.Salvesen, Per-Erik 8.Idland, Sverre 9.Swonson, Trapr 10.Kervinen, Ilkka
  4. Stefano, CZ85 Combat trigger has after-travel adjustment screw. It's OFM option part and therefore ok for IPSC Production also.
  5. This is how I use the locking lever: red - open yellow - locked green - semi locked state, you can still draw but with higher resistance
  6. http://www.brownells.com/aspx/NS/store/Pro...FIRING+PIN+STOP This is STI firing pin stop from Brownells catalog - very porous MIM part. I don't know if it is wise to have a MIM part subjected to constant hammering...
  7. Today's best combination is Rescomp tube, trimmed SV comp follower, Wolff spring w/ 10½ coils and SV +2 pad. 1+19 reloadable. SV +2 basepads will need some trimming to fit in the IPSC box if you have a round profile slide with Bomars. Flat top slide is easier.
  8. I have SPS and STI 140 mm & 170 mm tubes. All work well with long loaded 9 major. Never even tried with spacers. Factory length ammunition works better with STI tubes which was a surprise.
  9. I had one 140 mm STI .40 tube. Shortening that 140 mm tube to 127 mm ( note: 1mm longer than standard 126 mm ) did cost 0 € to me, only few minutes of dremeling. My opinion is that there is no real difference between Standard and Limited: You can have: - 1 + 19 capacity within IPSC box. - 0.5x s draw from IPSC legal holster position - 0.9x s mag change from mag pouch behind the hip bone. Some things are just different, no real competitive advantage either way.
  10. If you want to estimate total IPSC membership, there's "Regional Status" page: http://www.ipsc.org/ranking.htm My estimate of total membership is somewhere between 45000 .. 50000. - IPSC Brazil has 5000 members ( e aproximadamente 4995 atletas registrados até a data de hoje. ) - 6 regions have more than 2000 members. - 6 regions have less than 2000 but more than 1000 WS XIV slots were awarded with rough rate of 3 slots per 100 members ( remember 2k cap for 6 largest regions ) so my guesstimate is 47 206 members
  11. Is it possible to cut hard chrome lined barrel shorter without ruining accuracy? Will it chip?
  12. Basepad will go off easily if you compress the mag spring, here is my top secret special tool: Push once and last coil will get out of basepad: One more time and basepad is free to go:
  13. Is there any Scandinavian in this forum which is not using CZ? ( I'm from Finland) Well, I'm not shooting CZ anymore as my brand new STI just arrived Here is some answers you asked: I use buffers, buffers help slide & rear sight to stay healthy longer. Buffers will last somewhere between 200 .. 1000 rounds with PF175 and factory spring. What kind of problems there can be with buffers? I've had any. Early models CZ IPSC without buffers are serious rear sight breaking machines. I know at least 5 buddies which CZ's rear sights hasn't survived :-( Even welded sights have failed, of course at big match :-) Somehow my factory LPA sight has survived, I think it is b/c buffers. There are 2 reasons why slide stop activates with non-empty magazine: - round or follower hits slide stop - weak slide stop spring Is very annoying when slide locks back during fast stage. I've changed SS spring to new one, no more locking after that. Then I started using the other slide stop which never locks back just to make sure. Just never shoot it empty! My latest load for CZ is: 180 gr FMJ bullet, 5,0 gr N320, OAL 28,60 mm, CCI small rifle primers This is only for good quality brass, short OAL raises pressure ! good luck Esa1195
  14. Here is my mag trick: Spring: Cut one coil off from spring. I was very unwilling to cut my mag springs but when I compared my factory mags' springs I found out that 1 spring was already 1 coil shorted from the factory without any feed failures. Follower: If you compare CZ follower to skywalker's SVI follower you can notice that CZ follower is just too big and 'eats' your valuable mag capacity! There is unmodified follower at the right and left one has had little surgery. Basepad: Just like skywalker said you can lock baseplate with a screw. I just drilled small hole to the plastic basepad and now small screw with built-in washer locks baseplate. Then I carved basepad floor very carefully to have just a little more room for spring. And now we have a 18 round mag for CZ :-) I wonder if 19+1 is possible with real extended basepad?
×
×
  • Create New...