Sprig

Was on a frame mounted open gun.

I sent a RTS2 back that had a cracked lens. I asked how much for repair and within a few days i had a tracking number from them. I thought was kinda fast but when it arrived it was a reconditioned optic that looked and functioned brand new at no charge. They are awesome .

Sport pistol and VV N320 . I found the N320 cleaner . YMMV

When i have questions about things like this, i start with asking the builder.

Fed, Speer , blazer all seem to be the most consistent for myself so those are my choice for matches .

I had a similar issue with a aftec , i ended up running only 1 spring and it solved the problem .

This a a volunteer sport for the most part, at most local clubs . Without volunteers we have nothing . At least where i am at .

still using the Lyman. works great .

I had my RF dialed in for CCI but when changed brands to FED or WIN i had to play with adjustments to get 99% reliability . With the EC adapter , zero adjustments between brands with a 100% reliability rate . Best thing out for a RF .

I used them with 7.1 autocomp and were flat but no piercing. I use them with 7.8 3n37 and look normal. Both with 124 JHP and both loads were 172 PF . YMMV

I know a guy that can't sleep at night if his comp is dark, it has to look like new . I wipe the gunk and re oil after every practice ( 400 rounds ) . If shot a local 100-150 or so, i leave it till 400 mark, may add oil . Full grip off break down and deep clean at 3k .

Work great, most i shoot with use them in 38sc and 9 major .

I broke one in the exact same spot . I sent it to them asking for a exchange . Their reply was ' we need to send this for testing ' , never got a replacement . Good luck

^^^ This . I ran chrono for a level 2 sectional and there were 3 open shooters that shot for no score with TTI 4 mm on 170 mags . If want to use those it's best to check before heading to a major .

I tried some of this and it seems so fine it's leaking out of the dillon powder slide. It also seems to drip out of the funnel on the upstroke . Has anyone had this issue on dillons ? Been loading autocomp for the last 2 years and never had this type of leakage , nor with any other powders I've tried .

buddies shooting the federal Syntech had failure to fire while all other ammo worked normal in their guns . All said had solid primer hits without a bang. Odd considering lots use their primers when loading their own, maybe the primers were not seated all the way , idk .

Yeah it does , WIN SRP at brownells are $1600 for 50k . With fees at PV they are $1440 delivered

Powder Valley is still less on everything i checked .

Tooth brush style scrubber brush with some hoppes and its all gone .

1050 With a M7 drive running 9 with a lee regular sizing die, redding competition seat die and the original Dillon crimp die . When loading 40 it's similar but the lee U die for sizing, this works for me. The 9 lee U dies shaved brass , the dillon size die busted pins to often , the dillon 40 size die wouldn't get the bulge out no matter what i did . Like said above , learn your system . The m7 stops if there is a issue with primers not coming out ( don't have this issue any more ) idk how the ammobot detects a issue at the swage station but the M7 will stop if there is a problem.

Tighten in the up position is correct, if tighten in the down position it will clunk when the alignment pin come down, i don't know why but that is the way it is .

I made something similar. In the winter i leave it under a heater in the back room at work , in the summer set in the sun. Both work well. Never have water spot issues, possibly because of the type soap used ?

That's pretty crazy. Been loading at 7.2 or more for the last 75k rounds or so , no issues but am 1.175 . What is your OAL ?

SS says the same thing

Not sure about non-satin stainless but my build sheet says - Pistol Finish: Stainless Finish (only on stainless materials)